Hydro-mechanical analysis of SEALEX in-situ tests — Impact of technological gaps on long term performance of repository seals

Abstract The paper describes the observations and numerical analysis of the first SEALEX performance test PT-N1 installed in Tournemire Underground Research Laboratory (URL). The aim of this large-scale in-situ test is to investigate the impact of technological gaps on the long term performance of bentonite based seals. The swelling core consists of pre-compacted blocks of MX80 bentonite/sand mixture (70/30 in dry mass). An annular technological gap with variable width exists between the bentonite-based core and the host rock. The test is extensively instrumented for monitoring the main Hydro-Mechanical (HM) variables. Material parameters are determined from an extensive laboratory program carried out in the context of SEALEX project. To ensure an adequate interpretation of the test, the annular technological gap has been appropriately represented. A coupled HM formulation that incorporates the relevant processes involved in the problem under consideration has been adopted to analyse the evolution of the test. The paper presents and discusses the hydraulic and mechanical observations in the bentonite based core. Special attention is paid to the effect of technological gap on bentonite homogenisation as hydration progresses. The model was able to predict correctly the global HM behaviour of the bentonite based core considering the uncertainties and heterogeneities associated to the fabrication and installation processes of the bentonite based blocks. Technological gap was demonstrated to have an impact on dry density distribution.

[1]  Jean-Dominique Barnichon,et al.  A comparative study on the hydro-mechanical behavior of compacted bentonite/sand plug based on laboratory and field infiltration tests , 2013 .

[2]  Jean-Dominique Barnichon,et al.  Further insight into the microstructure of compacted bentonite–sand mixture , 2014 .

[3]  B. Vignal,et al.  A Full-Scale Tunnel Sealing Demonstration using Concrete and Clay Bulkheads Exposed to Elevated Temperatures and Pressures , 2006 .

[4]  Jean-Dominique Barnichon,et al.  Hydraulic conductivity and microstructure changes of compacted bentonite/sand mixture during hydration , 2013 .

[5]  Yu-Jun Cui,et al.  The relationship between suction and swelling properties in a heavily compacted unsaturated clay , 1998 .

[6]  Christophe Imbert,et al.  Hydro-mechanical response of a bentonite pellets/powder mixture upon infiltration , 2006 .

[7]  Antonio Gens,et al.  Mechanical behaviour of heavily compacted bentonite under high suction changes , 2003 .

[8]  Roland Pusch,et al.  Highly Compacted Sodium Bentonite for Isolating Rock-Deposited Radioactive Waste Products , 1979 .

[9]  Antonio Gens,et al.  A constitutive model for partially saturated soils , 1990 .

[10]  Behrouz Gatmiri,et al.  Experimental study on the swelling behaviour of bentonite/claystone mixture , 2012 .

[11]  Jean-Dominique Barnichon,et al.  Microstructure and anisotropic swelling behaviour of compacted bentonite/sand mixture , 2014 .

[12]  R. Gómez-Espina,et al.  Porosity Changes due to Hydration of Compacted Bentonite , 2012 .

[13]  R. Genuchten.  CALCULATING TEE UNSATURATED HYDRAULIC CONDUCTIVITY WITH A NEW CLOSED-FORM ANALYTICAL MODEL , 1978 .

[14]  Antonio Gens,et al.  Hydromechanical behaviour of a heterogeneous compacted soil: experimental observations and modelling , 2011 .

[15]  Antonio Lloret,et al.  Advances on the knowledge of the thermo-hydro-mechanical behaviour of heavily compacted “FEBEX” bentonite , 2007 .

[16]  A. Gens,et al.  Nonisothermal multiphase flow of brine and gas through saline media , 1994 .

[17]  R. H. Brooks,et al.  Hydraulic properties of porous media , 1963 .

[18]  J. Carrera,et al.  Numerical formulation for a simulator (CODE_BRIGHT) for the coupled analysis of saline media , 1996 .

[19]  Xavier Daupley.  Étude du potentiel de l'eau interstitielle d'une roche argileuse et de relations entre ses propriétés hydriques et mécaniques : Application aux argilites du Toarcien de la région de Tournemire (Aveyron) , 1997 .

[20]  Jonny Rutqvist,et al.  Thermo-hydro-mechanical characterisation of a bentonite-based buffer material by laboratory tests and numerical back analyses , 2001 .

[21]  Roland Pusch,et al.  Basic model of water- and gas-flow through smectite clay buffers , 1990 .

[22]  Jean-Dominique Barnichon,et al.  The effects of technological voids on the hydro-mechanical behaviour of compacted bentonite-sand mixture , 2013 .

[23]  Prapote Boonsinsuk,et al.  Formulation of backfill material for a nuclear fuel waste disposal vault , 1986 .

[24]  Simona Saba,et al.  Hydro-mechanical behaviour of bentonite-sand mixture used as sealing materials in radioactive waste disposal galleries , 2013 .

[25]  Enrique Romero,et al.  Thermo-hydro-mechanical behaviour of two heavily overconsolidated clays , 2005 .

[26]  D. Nguyen Minh,et al.  Experimental study of the influence of the degree of saturation on physical and mechanical properties in Tournemire shale (France) , 2004 .