Conceptual design and dimensional optimization of the linear delta robot with single legs for additive manufacturing

Because of remarkable characteristics such as superior speeds and accelerations, high stiffness and good dynamic performance, parallel robots are being increasingly adjusted to different task requirements in the manufacturing field. Their parallel structures made by closed-loop kinematic chains are better suited to develop new curved and multidirectional fabrication strategies in Additive Manufacturing. Based on this application, the conceptual design and dimensional optimization of a new structure of the linear delta parallel robot for Additive Manufacturing (three-dimensional printing) is presented. The new structure uses an innovative concept of delta mechanism with single legs and rotational joints, which consists of 12 links (three single parallel legs), three prismatic joints, and 11 revolute joints. A particular feature of the proposed mechanism is that it contains a joint common to all the kinematic chains instead of a mobile platform. Quality function deployment is used as a methodology for conceptual design. Then the kinematics of the mechanism is described in detail, including mobility analysis, inverse and direct kinematics, and a study of dimensional optimization. A method of efficient optimization based on genetic algorithms is used to find the minimum dimensional parameters of the robot, considering the maximization of the useful workspace as main performance index. Finally, a prototype of the robot is developed to validate the design concepts and functionality of the machine.

[1]  Yong He,et al.  Modeling and process planning for curved layer fused deposition , 2017 .

[2]  Marco Ceccarelli,et al.  Kinematic analysis and multi-objective optimization of a 3-UPR parallel mechanism for a robotic leg , 2018 .

[3]  François Pierrot,et al.  DELTA: a simple and efficient parallel robot , 1990, Robotica.

[4]  M. Nørremark,et al.  Conceptual and user-centric design guidelines for a plant nursing robot , 2009 .

[5]  Wei Ye,et al.  Design and analysis of a reconfigurable parallel mechanism for multidirectional additive manufacturing , 2017 .

[6]  Alberto J. Alvares,et al.  PROPOSAL OF AN ADVANCED DATA MODEL FOR STEP-NC COMPLIANT ADDITIVE MANUFACTURING , 2017 .

[7]  Clément Gosselin,et al.  The Synthesis of Planar Parallel Manipulators with a Genetic Algorithm , 1999 .

[8]  Yanbing Ni,et al.  Dimensional synthesis of a 3-DOF parallel manipulator with full circle rotation , 2015 .

[9]  Ridha Kelaiaia,et al.  Multiobjective optimization of a linear Delta parallel robot , 2012 .

[10]  Hermes Giberti,et al.  Dimensional synthesis of a 5-DOF parallel kinematic manipulator for a 3d printer , 2015, 2015 16th International Conference on Research and Education in Mechatronics (REM).

[11]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[12]  Parhi,et al.  Conceptual design of an underwater robot , 2015, 2015 International Conference on Man and Machine Interfacing (MAMI).

[13]  Oscar Altuzarra,et al.  Structural Synthesis of 3-DoF Spatial Fully Parallel Manipulators , 2014 .

[14]  Xuan Song,et al.  Development of a Low-Cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing , 2015 .

[15]  Richard S. Trask,et al.  An experimental demonstration of effective Curved Layer Fused Filament Fabrication utilising a parallel deposition robot , 2015 .

[16]  Anna Kosinska,et al.  Designing and optimization of parameters of delta-4 parallel manipulator for a given workspace , 2003, J. Field Robotics.

[17]  Cristhian Ivan Riano Jaimes,et al.  Aplicación de técnicas de desenvolvimiento de producto para el desarrollo de un robot antropomórfico , 2018 .

[18]  P. Dauchez,et al.  HEXA: a fast six-DOF fully-parallel robot , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[19]  R. Clavel,et al.  A Fast Robot with Parallel Geometry , 1988 .

[20]  D. Stewart.  A Platform with Six Degrees of Freedom , 1965 .

[21]  Olaf Diegel,et al.  Modeling and evaluation of curved layer fused deposition , 2012 .

[22]  Yongjie Zhao,et al.  Dimensional synthesis of a three translational degrees of freedom parallel robot while considering kinematic anisotropic property , 2013 .

[23]  Xin-Jun Liu,et al.  A New Approach to the Design of a DELTA Robot with a Desired Workspace , 2004, J. Intell. Robotic Syst..

[24]  S.-D. Stan,et al.  Evolutionary approach to optimal design of 3 DOF translation exoskeleton and medical parallel robots , 2008, 2008 Conference on Human System Interactions.

[25]  Tian Huang,et al.  Dimensional synthesis of the Delta robot using transmission angle constraintsDimensional synthesis of the Delta robot using transmission angle constraints , 2012, Robotica.

[26]  Guan Wang,et al.  Optimal design of the linear delta robot for prescribed cuboid dexterous workspace based on performance chart , 2008 .

[27]  Jack B. Revelle,et al.  The QFD handbook , 1998 .

[28]  Alberto J. Alvares,et al.  Development of the Linear Delta Robot for Additive Manufacturing , 2018, 2018 5th International Conference on Control, Decision and Information Technologies (CoDIT).

[29]  Jean-Pierre Merlet,et al.  Designing a Parallel Manipulator for a Specific Workspace , 1997, Int. J. Robotics Res..

[30]  Alberto J. Alvares,et al.  PROJETO MECATRÔNICO DE UM ROBÔ COM CINEMÁTICA PARALELA DELTA LINEAR PARA MANUFATURA ADITIVA , 2017 .

[31]  K. Miller,et al.  Optimal kinematic design of spatial parallel manipulators: Application to Linear Delta robot , 2003 .

[32]  Ming Z. Huang.  Design of a Planar Parallel Robot for Optimal Workspace and Dexterity , 2011 .

[33]  Yoji Akao,et al.  Quality Function Deployment : Integrating Customer Requirements into Product Design , 1990 .

[34]  Zouhaier Affi,et al.  Dimensional synthesis of a 3-translational-DOF in-parallel manipulator for a desired workspace , 2004 .

[35]  Zheng Xie,et al.  GA\SQP optimization for the dimensional synthesis of a delta mechanism based haptic device design , 2018, Robotics and Computer-Integrated Manufacturing.

[36]  Andrioaia Dragos,et al.  DETERMINING THE WORKSPACE SHAPE OF A ROBOT WITH DELTA 3D OF PARALLEL STRUCTURE , 2016 .

[37]  Eric Courteille,et al.  Design optimization of a Delta-like parallel robot through global stiffness performance evaluation , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[38]  Clément Gosselin,et al.  Conceptual Design and Dimensional Synthesis of a Novel 2-DOF Translational Parallel Robot for Pick-and-Place Operations , 2004 .

[39]  Med Amine Laribi,et al.  Analysis and dimensional synthesis of the DELTA robot for a prescribed workspace , 2007 .

[40]  N. M. Rao,et al.  Dimensional synthesis of a spatial 3-RPS parallel manipulator for a prescribed range of motion of spherical joints , 2009 .

[41]  Hamid D. Taghirad,et al.  Parallel Robots: Mechanics and Control , 2013 .

[42]  Cristhian Ivan Riano Jaimes,et al.  ENFOQUE SOBRE O DESENVOLVIMENTO DE UM ROBÔ COM ARQUITETURA PARALELA 5R PARA MANUFATURA ADITIVA , 2017 .