Effect of adjusted mesoscale drag model on flue gas desulfurization in powder-particle spouted beds

[1]  Xiaoxun Ma,et al.  Numerical investigation on the water vaporization during semi dry flue gas desulfurization in a three-dimensional spouted bed , 2021 .

[2]  Jinjia Wei,et al.  Comparative CFD modeling of a bubbling bed using a Eulerian–Eulerian two-fluid model (TFM) and a Eulerian-Lagrangian dense discrete phase model (DDPM) , 2021 .

[3]  Shuyan Wang,et al.  Numerical simulation of semi-dry desulfurization spouted bed using the discrete element method (DEM) , 2021 .

[4]  Q. Guo,et al.  A two fluid modeling study of bubble collapse due to bubble interaction in a fluidized bed , 2020 .

[5]  Haibo Gao,et al.  Experiments and simulation of varying parameters in cryogenic flue gas desulfurization process based on Aspen plus , 2020 .

[6]  Hua Wang,et al.  Numerical investigation of gas thermal property in the gasification process of a spouted bed gasifier , 2020 .

[7]  Junwu Wang,et al.  A unified EMMS-based constitutive law for heterogeneous gas-solid flow in CFB risers , 2020 .

[8]  Baodong Cheng,et al.  Pollution haven or halo? The role of the energy transition in the impact of FDI on SO2 emissions. , 2020, The Science of the total environment.

[9]  Qinghua Gao,et al.  Numerical and experimental investigations of instability in a spouted bed with non-spherical particles , 2020 .

[10]  A. Erto,et al.  Wet oxidation scrubbing (WOS) for flue-gas desulphurization using sodium chlorite seawater solutions , 2020 .

[11]  Xiaogang Shi,et al.  A four-zone drag model based on cluster for simulating gas-solids flow in turbulent fluidized beds , 2020 .

[12]  Xiaoxun Ma,et al.  Numerical and experimental study of integral multi-jet structure impact on gas-solid flow in a 3D spout-fluidized bed , 2020 .

[13]  Chonghun Han,et al.  EMMS drag model for simulating a gas–solid fluidized bed of geldart B particles: Effect of bed model parameters and polydisperity , 2020 .

[14]  Xinhua Liu,et al.  A CFD-PBM-EMMS integrated model applicable for heterogeneous gas-solid flow , 2020 .

[15]  Feng Wu,et al.  Eulerian–Eulerian Numerical Study of the Flue Gas Desulfurization Process in a Semidry Spouted Bed Reactor , 2020, ACS omega.

[16]  Jinghai Li,et al.  A direct solution to multi-objective optimization: Validation in solving the EMMS model for gas-solid fluidization , 2018, Chemical Engineering Science.

[17]  Xiaoxun Ma,et al.  Numerical simulation and optimization of hydrodynamics in a novel integral multi-jet spout-fluidized bed , 2018, Powder Technology.

[18]  Jinghai Li,et al.  A sub-grid EMMS drag for multiphase particle-in-cell simulation of fluidization , 2018 .

[19]  JR-TSUNG Huang.  Sulfur dioxide (SO2) emissions and government spending on environmental protection in China - Evidence from spatial econometric analysis , 2018 .

[20]  Jinghai Li,et al.  Mesoscience based on the EMMS principle of compromise in competition , 2018 .

[21]  Wenqing Zhang,et al.  Improving the desulfurization performance of CaCO3 with sodium humate , 2018 .

[22]  Liming Sun,et al.  Practical and Theoretical Study of the Adsorption Performances of Straw-Based Tertiary Amine-Supported Material toward Sulfur Dioxide in Flue Gas , 2017 .

[23]  Weize Wu,et al.  Ionic liquids: Functionalization and absorption of SO 2 , 2017, Green Energy & Environment.

[24]  Jun Wang,et al.  Effects of meteorological conditions on sulfur dioxide air pollution in the North China plain during winters of 2006–2015 , 2016 .

[25]  Keting Gui,et al.  Effects of magnetic fields on improving mass transfer in flue gas desulfurization using a fluidized bed , 2016 .

[26]  Y. Wang,et al.  Is there an Environmental Kuznets Curve for SO2 emissions? A semi-parametric panel data analysis for China , 2016 .

[27]  Jinghai Li,et al.  Extension and application of energy-minimization multi-scale (EMMS) theory for full-loop hydrodynamic modeling of complex gas–solid reactors , 2015 .

[28]  John R. Grace,et al.  New structure-based model for Eulerian simulation of hydrodynamics in gas–solid fluidized beds of Geldart group “A” particles , 2014 .

[29]  Jinghai Li,et al.  A stability condition for turbulence model: From EMMS model to EMMS-based turbulence model , 2013, 1311.1272.

[30]  Matthieu Vierling,et al.  Adsorption of SOx by oxide materials: A review , 2013 .

[31]  Xi Gao,et al.  Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed , 2012 .

[32]  Ehsan Esmaili,et al.  Adjustment of drag coefficient correlations in three dimensional CFD simulation of gas-solid bubbling fluidized bed , 2011, Adv. Eng. Softw..

[33]  Rui Xiao,et al.  Modeling and experimental study on multi-level humidifying of the underfeed circulating spouted bed for flue gas desulfurization , 2010 .

[34]  Junwu Wang,et al.  EMMS-based Eulerian simulation on the hydrodynamics of a bubbling fluidized bed with FCC particles , 2010 .

[35]  Wei Wang,et al.  Searching for a mesh-independent sub-grid model for CFD simulation of gas–solid riser flows , 2009 .

[36]  Chunxi Lu,et al.  CFD modeling of mass transfer and stripping efficiency in FCCU strippers , 2008 .

[37]  Xiaojun Bao,et al.  Computational fluid dynamics (CFD) modeling of spouted bed: Assessment of drag coefficient correlations , 2006 .

[38]  V. Cortés,et al.  Pilot-Plant Technical Assessment of Wet Flue Gas Desulfurization Using Limestone. , 2006 .

[39]  Wei Ge,et al.  Simulation of Heterogeneous Structure in a Circulating Fluidized-Bed Riser by Combining the Two-Fluid Model with the EMMS Approach , 2004 .

[40]  Jinghai Li,et al.  Physical mapping of fluidization regimes—the EMMS approach , 2002 .

[41]  T. Kaneko,et al.  Influence of gas components on removal of SO2 from flue gas in the semidry FGD process with a powder-particle spouted bed , 2001 .

[42]  Tadashi Yoshida,et al.  Use of limestone for SO2 removal from flue gas in the semidry FGD process with a powder-particle spouted bed , 2000 .

[43]  Qimin Guo,et al.  A new semi-dry desulfurization process using a powder-particle spouted bed , 2000 .

[44]  Feng Wu,et al.  Numerical simulation of semi-dry flue gas desulfurization process in the powder-particle spouted bed , 2020 .