Three-dimensional numerical reconstruction method for irregular structures of granular geomaterials

Granular geomaterials are comprised of many geometrically irregular and randomly distributed particles on multi-scales that strongly affect their physical and or mechanical properties. However, providing an accurate representation or characterization of the complex structures of granular geomaterials remains a challenge. In this study, we propose a novel computerized method to numerically represent a three-dimensional (3D) irregular granular structure based on a natural conglomerate sample. To represent the 3D granular structure, the reconstruction algorithm incorporates a two-point probability function along both the principal and diagonal directions, as well as a linear-path function along the principal directions of the model, and a multithread parallel computing algorithm is used to accelerate the 3D reconstruction process of the irregular structures. To validate the accuracy of the proposed algorithm, the characteristics and mechanical properties of the reconstructed 3D granular structure are analyzed and compared with those of the prototype conglomerate sample. This comparison shows that the proposed algorithm improves the reconstruction efficiency of previous algorithms, and the reconstruction model exhibits greater similarity to the natural conglomerate structure than previous reconstruction models. This proposed computational method can also be used to reconstruct other granular structures.

[1]  Michael Shearer,et al.  Shear-driven size segregation of granular materials: modeling and experiment. , 2009, Physical review. E, Statistical, nonlinear, and soft matter physics.

[2]  Yang Ju,et al.  3D numerical reconstruction of well-connected porous structure of rock using fractal algorithms , 2014 .

[3]  S. Torquato.  Random Heterogeneous Materials , 2002 .

[4]  Shazim Ali Memon,et al.  Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate concrete , 2012 .

[5]  Fuqiang Liu,et al.  Process based reconstruction and simulation of a three-dimensional fuel cell catalyst layer , 2010 .

[6]  T. Tang,et al.  A pixel selection rule based on the number of different‐phase neighbours for the simulated annealing reconstruction of sandstone microstructure , 2009, Journal of microscopy.

[7]  M. Stampanoni,et al.  3D experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography (μCT) , 2007 .

[8]  Yang Jiao,et al.  Modeling and characterizing anisotropic inclusion orientation in heterogeneous material via directional cluster functions and stochastic microstructure reconstruction , 2014 .

[9]  Christoph H. Arns,et al.  Computation of linear elastic properties from microtomographic images: Methodology and agreement between theory and experiment , 2002 .

[10]  Surya R. Kalidindi,et al.  Morphological Analyses of Polymer Electrolyte Fuel Cell Electrodes with Nano‐Scale Computed Tomography Imaging , 2013 .

[11]  Jay G. Sanjayan,et al.  Effect of elevated temperatures on geopolymer paste, mortar and concrete , 2010 .

[12]  Shaopeng Ma,et al.  Characterization of Elastic Modulus of Granular Materials in a New Designed Uniaxial Oedometric System , 2016 .

[13]  Lynne S. Taylor,et al.  Influence of Particle Size on the Ultraviolet Spectrum of Particulate-Containing Solutions: Implications for In-Situ Concentration Monitoring Using UV/Vis Fiber-Optic Probes , 2011, Pharmaceutical Research.

[14]  Jon M. Hiller,et al.  Three-dimensional reconstruction of a solid-oxide fuel-cell anode , 2006, Nature materials.

[15]  A. Chemenda,et al.  Influence of the loading conditions on the mechanical response of granular materials as constrained from experimental tests on synthetic rock analoguematerial , 2011 .

[16]  Yang Ju,et al.  Multi-thread parallel algorithm for reconstructing 3D large-scale porous structures , 2017, Comput. Geosci..

[17]  Hai-Sui Yu,et al.  A virtual experiment technique on the elementary behaviour of granular materials with discrete element method , 2013 .

[18]  Xu Qiang,et al.  Study on the shear strength of soil–rock mixture by large scale direct shear test , 2011 .

[19]  S. Torquato,et al.  Reconstructing random media , 1998 .

[20]  T. Majmudar,et al.  Contact force measurements and stress-induced anisotropy in granular materials , 2005, Nature.

[21]  Pierre M. Adler,et al.  Flow in simulated porous media , 1990 .

[22]  Hans Beushausen,et al.  The influence of aggregate type on the strength and elastic modulus of high strength concrete , 2015 .

[23]  Joachim Moortgat,et al.  Mixing and spreading of multiphase fluids in heterogeneous bimodal porous media , 2017 .

[24]  P. Levitz,et al.  Off-lattice reconstruction of porous media: critical evaluation, geometrical confinement and molecular transport , 1998 .

[25]  Wancheng Zhu,et al.  Numerical simulation and interpretation of the grain size effect on rock strength , 2018 .

[26]  Andrey P. Jivkov,et al.  Monte Carlo Simulations of Mesoscale Fracture of Concrete with Random Aggregates and Pores: a Size Effect Study , 2015 .

[27]  Marc Z. Miskin,et al.  Particle shape effects on the stress response of granular packings. , 2013, Soft matter.

[28]  S. Litster,et al.  Resolving the Three‐Dimensional Microstructure of Polymer Electrolyte Fuel Cell Electrodes using Nanometer‐Scale X‐ray Computed Tomography , 2012 .

[29]  Koichi Ayuta,et al.  Freeze-Thaw Resistance of Lightweight Concrete and Aggregate at Different Freezing Rates , 2008 .

[30]  Feng Gao,et al.  CT Identification and Fractal Characterization of 3‐D Propagation and Distribution of Hydrofracturing Cracks in Low‐Permeability Heterogeneous Rocks , 2018 .

[31]  Xin Chen,et al.  A procedure to detect, construct, quantify, numerically simulate and validate fracture networks in coal blocks , 2016 .

[32]  S. Torquato,et al.  Reconstructing random media. II. Three-dimensional media from two-dimensional cuts , 1998 .

[33]  S. Bakke,et al.  Process Based Reconstruction of Sandstones and Prediction of Transport Properties , 2002 .

[34]  Roger Wepf,et al.  On the application of focused ion beam nanotomography in characterizing the 3D pore space geometry of Opalinus clay , 2011 .

[35]  S. Mitra,et al.  Understanding the micro structure of Berea Sandstone by the simultaneous use of micro-computed tomography (micro-CT) and focused ion beam-scanning electron microscopy (FIB-SEM). , 2011, Micron.

[36]  Shanyong Wang,et al.  A numerical investigation of the hydraulic fracturing behaviour of conglomerate in Glutenite formation , 2013 .

[37]  Marc Secanell,et al.  Stochastic reconstruction using multiple correlation functions with different-phase-neighbor-based pixel selection. , 2014, Physical review. E, Statistical, nonlinear, and soft matter physics.

[38]  Meng Li,et al.  A new correlation to predict fracture pressure loss and to assist fracture modeling in sandy conglomerate reservoirs , 2015 .

[39]  Yang Ju,et al.  3D reconstruction of low-permeability heterogeneous glutenites and numerical simulation of hydraulic fracturing behavior , 2016 .

[40]  F. Stillinger,et al.  A superior descriptor of random textures and its predictive capacity , 2009, Proceedings of the National Academy of Sciences.