Modeling and dynamics analysis of electro-mechanical power-trains
暂无分享,去创建一个
[1] A. Miraoui,et al. Faults in permanent magnet traction motors: state of the art and modelling approaches , 2010, IEEE PES General Meeting.
[2] Jana Fuhrmann,et al. Guidance And Control Of Ocean Vehicles , 2016 .
[3] Charles E. Johnson,et al. COMPONENT INERTIAL EFFECTS ON TRANSMISSION DESIGN , 1984 .
[4] Ronald L. Huston,et al. On Dynamic Loads in Parallel Shaft Transmissions: Part I—Modelling and Analysis , 1988 .
[5] Robert B. Randall,et al. A New Method of Modeling Gear Faults , 1982 .
[6] Z. Zhu,et al. Instantaneous magnetic field distribution in brushless permanent magnet DC motors. III. Effect of stator slotting , 1993 .
[7] Shahin Hedayati Kia,et al. Torsional Vibration Effects on Induction Machine Current and Torque Signatures in Gearbox-Based Electromechanical System , 2009, IEEE Transactions on Industrial Electronics.
[8] Jacek F. Gieras,et al. Permanent magnet motor technology : design and applications , 1996 .
[9] Xu Wang,et al. Application Study on Resonance Demodulation Technique in Fault Diagnosis of Gear Box , 2010 .
[10] Ahmad Ghasemloonia,et al. Gear tooth failure detection by the resonance demodulation technique and the instantaneous power spectrum method - A comparative study , 2011 .
[11] Amiya R Mohanty,et al. Monitoring gear vibrations through motor current signature analysis and wavelet transform , 2006 .
[12] Jon Rigelsford,et al. Automotive Control Systems: For Engine, Driveline and Vehicle , 2004 .
[13] Rajendra Singh,et al. Effect of sliding friction on the dynamics of spur gear pair with realistic time-varying stiffness , 2007 .
[14] Nong Zhang,et al. Torsional finite elements and nonlinear numerical modelling in vehicle powertrain dynamics , 2005 .
[15] Nesimi Ertugrul,et al. INVESTIGATION OF IRON LOSSES IN A HIGH FLUX INTERIOR PM AUTOMOTIVE ALTERNATOR , 2004 .
[16] Mohammad Ebrahimi,et al. Hybrid modelling and simulation of the torsional vibration of vehicle driveline systems , 2001 .
[17] Hamid Reza Karimi,et al. Wind turbine modeling using the bond graph , 2011, 2011 IEEE International Symposium on Computer-Aided Control System Design (CACSD).
[18] Fakher Chaari,et al. Study of a spur gear dynamic behavior in transient regime , 2011 .
[19] U. Knorr,et al. Electric circuit and control system simulation by linking Simplorer(R) and Matlab/Simulink(R) analysis of interactions of subsystems of modern electric drives , 2000, COMPEL 2000. 7th Workshop on Computers in Power Electronics. Proceedings (Cat. No.00TH8535).
[20] Maurice Adams,et al. Rotating Machinery Vibration: From Analysis to Troubleshooting , 2000 .
[21] Ahmet Kahraman,et al. A dynamic model to predict modulation sidebands of a planetary gear set having manufacturing errors , 2010 .
[22] Rajendra Singh,et al. Analysis of automotive neutral grear rattle , 1989 .
[23] Ian Moir,et al. Aircraft Systems: Mechanical, Electrical, and Avionics Subsystems Integration , 2008 .
[24] Tang Jinyuan,et al. Nonlinear dynamic characteristics of geared rotor bearing systems with dynamic backlash and friction , 2011 .
[25] T.G. Habetler. Current-based motor condition monitoring: Complete protection of induction and PM machines , 2007, 2007 International Aegean Conference on Electrical Machines and Power Electronics.
[26] M. Cosovic,et al. Design optimization of 8/14 switched reluctance machine for electric vehicle , 2012, 2012 XXth International Conference on Electrical Machines.
[27] Jawad Faiz,et al. Static-, Dynamic-, and Mixed-Eccentricity Fault Diagnoses in Permanent-Magnet Synchronous Motors , 2009, IEEE Transactions on Industrial Electronics.
[28] M. Barthod,et al. Auditory perception of noise known as rattle in gearboxes , 2005 .
[29] Sadok Sassi,et al. A Numerical Model to Predict Damaged Bearing Vibrations , 2007 .
[30] Georg Eisele,et al. Aspects of NVH Integration in Hybrid Vehicles , 2009 .
[31] Min Dai,et al. Design and analysis of 42-V permanent-magnet generator for automotive applications , 2003 .
[32] Elias S. Manolakos,et al. Helicopter gearbox fault detection and diagnosis using analog neural networks , 1993, Proceedings of 27th Asilomar Conference on Signals, Systems and Computers.
[33] Phillipp Meister,et al. Introduction To Bond Graphs And Their Applications , 2016 .
[34] Z. Zhu,et al. Instantaneous magnetic field distribution in permanent magnet brushless DC motors. IV. Magnetic field on load , 1993 .
[35] Z. Daneshi-Far,et al. Planetary gearbox effects on induction machine in wind turbine: Modeling and analysis , 2012, 2012 XXth International Conference on Electrical Machines.
[36] Edward J. Burke. Simulations of gear-based systems including backlash , 2006 .
[37] Tomaž Katrašnik,et al. Hybridization of powertrain and downsizing of IC engine – A way to reduce fuel consumption and pollutant emissions – Part 1 , 2007 .
[38] Mohit Singh,et al. Gearbox and Drivetrain Models to Study Dynamic Effects of Modern Wind Turbines , 2013, IEEE Transactions on Industry Applications.
[39] Scott D. Sudhoff,et al. Analysis of Electric Machinery and Drive Systems , 1995 .
[40] J. Rosero,et al. Simulation and Fault Detection of Short Circuit Winding in a Permanent Magnet Synchronous Machine (PMSM) by means of Fourier and Wavelet Transform , 2008, 2008 IEEE Instrumentation and Measurement Technology Conference.
[41] G.B. Kliman,et al. An adaptive, on-line, statistical method for bearing fault detection using stator current , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.
[42] B. Yu,et al. Simulink and bond graph modeling of an air-conditioned room , 2004, Simul. Model. Pract. Theory.
[43] Lena Jaeger,et al. Vector Control And Dynamics Of Ac Drives , 2016 .
[44] Singiresu S Rao,et al. A Comparative Study of Evidence Theories in the Modeling, Analysis, and Design of Engineering Systems , 2013 .
[45] M. Ronkowski. Modelling of electrical machines using the Modelica Bond-Graph Library , 2008, 2008 13th International Power Electronics and Motion Control Conference.
[46] C. Changenet,et al. A Model for the Prediction of Churning Losses in Geared Transmissions—Preliminary Results , 2007 .
[47] Satoru Ohnuma,et al. Research on Idling Rattle of Manual Transmission , 1985 .
[48] Liu Hong,et al. A time domain approach to diagnose gearbox fault based on measured vibration signals , 2014 .
[49] Gaël Chevallier,et al. Gear impacts and idle gear noise: Experimental study and non-linear dynamic model , 2009 .
[50] Peter Vas,et al. Sensorless vector and direct torque control , 1998 .
[51] J.-L. Tébec,et al. Experimental study of dynamic and noise produced by a gearing excited by a multi-harmonic excitation , 2007 .
[52] Liu Hong,et al. A time-domain fault detection method based on an electrical machine stator current measurement for planetary gear-sets , 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.
[53] C. James Li,et al. Gear fatigue crack prognosis using embedded model, gear dynamic model and fracture mechanics , 2005 .
[54] L Romeral,et al. Electrical monitoring for fault detection in an EMA , 2010, IEEE Aerospace and Electronic Systems Magazine.
[55] Dennis P. Townsend,et al. Vibration Signature Analysis of a Faulted Gear Transmission System , 1996 .
[56] Philippe Velex,et al. An integrated electro-mechanical model of motor-gear units-Applications to tooth fault detection by electric measurements , 2012 .
[57] Jyoti K. Sinha,et al. Fault Diagnosis of Rotating Machines using Vibration and Bearing Temperature Measurements , 2013 .
[58] Fakher Chaari,et al. Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmission , 2008 .
[59] Mogens Blanke,et al. A Ship Propulsion System as a Benchmark for Fault-tolerant Control , 1997 .
[60] T.G. Habetler. Current-based condition monitoring of electrical machines in safety critical applications , 2008, 2008 13th International Power Electronics and Motion Control Conference.
[61] Ruoyu Li,et al. Split torque type gearbox fault detection using acoustic emission and vibration sensors , 2010, 2010 International Conference on Networking, Sensing and Control (ICNSC).
[62] Wim Desmet,et al. Frictional power loss in solid‐grease‐lubricated needle roller bearing , 2013 .
[63] Fengshou Gu,et al. Gearbox Fault Detection Using Spectrum Analysis of the Drive Motor Current Signal , 2010, WCE 2010.
[64] C. Saudemont,et al. Comparison of technical features between a More Electric Aircraft and a Hybrid Electric Vehicle , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.
[65] Alan S. Perelson,et al. System Dynamics: A Unified Approach , 1976, IEEE Transactions on Systems, Man, and Cybernetics.
[66] Esam M. Alawadhi,et al. Finite Element Simulations Using ANSYS , 2009 .
[67] P. Velex. On the modelling of spur and helical gear dynamic behaviour , 2012, 1204.2636.
[68] Iqbal Husain,et al. Electric and hybrid vehicles : design fundamentals , 2003 .
[69] R Manoj,et al. Gear rattle modelling and analysis for automotive manual transmissions , 2001 .
[70] Abdellatif Miraoui,et al. Identification of demagnetization faults in a permanent magnet synchronous machine by permeance network , 2009 .
[71] Kathleen Ellen Bailey,et al. Dynamic modeling and control of hybrid electric vehicle powertrain systems , 1998 .
[72] W. A. Tuplin. Gear-Tooth Stresses at High Speed , 1950 .
[73] Thomas G. Habetler,et al. An amplitude Modulation detector for fault diagnosis in rolling element bearings , 2004, IEEE Transactions on Industrial Electronics.
[74] F. Massouh,et al. Analysis of torsional oscillation of the drive train in horizontal-axis wind turbine , 2009, 2009 8th International Symposium on Advanced Electromechanical Motion Systems & Electric Drives Joint Symposium.
[75] Seung-Ki Sul,et al. Analysis and compensation of current measurement error in vector controlled AC motor drives , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.
[76] Chee-Mun. Ong,et al. Dynamic simulation of electric machinery : using MATLAB/SIMULINK , 1997 .
[77] Darryll J. Pines,et al. A review of vibration-based techniques for helicopter transmission diagnostics , 2005 .
[78] T. S. Sankar,et al. On the Dynamic Response of a Helical Geared System Subjected to a Static Transmission Error in the Form of Deterministic and Filtered White Noise Inputs , 1988 .
[79] Michael Palocz-Andresen. Decreasing Fuel Consumption and Exhaust Gas Emissions in Transportation: Sensing, Control and Reduction of Emissions , 2012 .
[80] M. Zuo,et al. Gearbox fault detection using Hilbert and wavelet packet transform , 2006 .
[81] Wenyi Wang,et al. EARLY DETECTION OF GEAR TOOTH CRACKING USING THE RESONANCE DEMODULATION TECHNIQUE , 2001 .
[82] Robert G. Parker,et al. Three-dimensional nonlinear vibration of gear pairs , 2012 .
[83] A. Abass,et al. Automotive Driveline Modelling, Inverse-Simulation and Compensation , 2010, 2010 International Conference on Intelligent Systems, Modelling and Simulation.
[84] D. Diallo,et al. Sensor fault diagnosis for improving the availability of electrical drives , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.
[85] R. Krishnan,et al. Electric Motor Drives: Modeling, Analysis, and Control , 2001 .
[86] Jan Swevers,et al. Multiphysics modeling of mechatronic multibody systems , 2006 .
[87] Benoit Robyns,et al. Experimental Validation of Energy Storage System Management Strategies for a Local DC Distribution System of More Electric Aircraft , 2010, IEEE Transactions on Industrial Electronics.
[88] P. Velex,et al. A MATHEMATICAL MODEL FOR ANALYZING THE INFLUENCE OF SHAPE DEVIATIONS AND MOUNTING ERRORS ON GEAR DYNAMIC BEHAVIOUR , 1996 .
[89] Wei Liu,et al. Study of Driving Performance of Semi-active Suspension Based on Hybrid Control Strategy , 2010, 2010 Second WRI Global Congress on Intelligent Systems.
[90] Loganathan Umanand,et al. Bond graph toolbox for handling complex variable , 2009 .
[91] Christophe Changenet,et al. Power loss predictions in geared transmissions using thermal networks-applications to a six-speed manual gearbox , 2006 .
[92] Süreyya Nejat Doğan,et al. Loose part vibration in vehicle transmissions - Gear rattle , 1999 .
[93] A. J. Mitcham,et al. Permanent magnet generator options for the More Electric Aircraft , 2002 .
[94] Joël Perret-Liaudet,et al. Experimental and numerical analysis of automotive gearbox rattle noise , 2012 .
[95] Chandana Jayampathi Gajanayake,et al. Stator Current Analysis From Electrical Machines Using Resonance Residual Technique to Detect Faults in Planetary Gearboxes , 2015, IEEE Transactions on Industrial Electronics.
[96] Z. Zhu,et al. Instantaneous magnetic field distribution in brushless permanent magnet DC motors. I. Open-circuit field , 1993 .
[97] Jia Lu,et al. Design and Finite Element Analysis of Permanent Magnet Synchronous Motor with Novel Rotor Type , 2010, 2010 Asia-Pacific Power and Energy Engineering Conference.
[98] Hassan Salarieh,et al. Analysis of nonlinear oscillations in spur gear pairs with approximated modelling of backlash nonlinearity , 2012 .
[99] B Mahdi Ebrahimi,et al. Feature Extraction for Short-Circuit Fault Detection in Permanent-Magnet Synchronous Motors Using Stator-Current Monitoring , 2010, IEEE Transactions on Power Electronics.
[100] James R. Ottewill,et al. An investigation into the effect of tooth profile errors on gear rattle , 2010 .
[101] T.G. Habetler,et al. Detecting Rotor Faults in Low Power Permanent Magnet Synchronous Machines , 2007, IEEE Transactions on Power Electronics.
[102] Liu Hong,et al. Gear Fault Detection in Planetary Gearbox Using Stator Current Measurement of AC Motors , 2012 .
[103] A. W. Lees,et al. The influence of cracks in rotating shafts , 2005 .
[104] E. F. Merrill. Torsional dynamics of AC electrical machines and systems , 1994, Proceedings of IEEE Pulp and Paper Industry Conference.
[105] Brian Stone,et al. Coupled Torsional and Transverse Vibration of a Back-to-Back Gearbox Rig , 2005 .
[106] Z. Zhu,et al. Instantaneous magnetic field distribution in brushless permanent magnet DC motors. II. Armature-reaction field , 1993 .
[107] T.G. Habetler,et al. Current/Voltage Based Detection of Faults in Gears Coupled to Electric Motors , 2005, IEEE International Conference on Electric Machines and Drives, 2005..
[108] Karl Reichard,et al. Fault localization for gear tooth failure in coupled mechanical systems , 2003, 2003 IEEE Aerospace Conference Proceedings (Cat. No.03TH8652).
[109] D. Jelaska. Gears and Gear Drives , 2012 .
[110] Riccardo Russo,et al. Theoretical and experimental investigation into the influence of the periodic backlash fluctuations on the gear rattle , 2011 .
[111] Y. Sozer,et al. Unbalanced fault analysis of doubly fed induction generator drive system for wind turbine applications , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[112] Hasan Ozguven,et al. A non-linear mathematical model for dynamic analysis of spur gears including shaft and bearing dynamics , 1991 .
[113] Iqbal Husain,et al. Analytical model for predicting noise and vibration in permanent magnet synchronous motors , 2009, 2009 IEEE Energy Conversion Congress and Exposition.
[114] Mohit Singh,et al. Modeling and Control to Mitigate Resonant Load in Variable-Speed Wind Turbine Drivetrain , 2013, IEEE Journal of Emerging and Selected Topics in Power Electronics.
[115] L.I. Silva,et al. Multi-domain modeling of electric traction drives using Bond Graphs: Application to fault diagnosis , 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.
[116] Chris Mi,et al. Hybrid Electric Vehicles: Principles and Applications with Practical Perspectives , 2011 .
[117] Dean Karnopp,et al. Analysis and simulation of multiport systems : the bond graph approach to physical system dynamics , 1968 .
[118] Peter Tavner,et al. Condition Monitoring of Rotating Electrical Machines , 2008 .
[119] Athanasios N. Safacas,et al. Detection of Backlash Phenomena Appearing in a Single Cement Kiln Drive Using the Current and the Electromagnetic Torque Signature , 2013, IEEE Transactions on Industrial Electronics.
[120] Benjamin B. Wagner,et al. Rotating Equipment Defect Detection Using the Algorithmof Mode Isolation , 2007 .
[121] M. Haddar,et al. Nonlinear dynamics of a two-stage gear system with mesh stiffness fluctuation, bearing flexibility and backlash , 2009 .
[122] Chandana Jayampathi Gajanayake,et al. Model based current analysis of electrical machines to detect faults in planetary gearboxes , 2014, 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.
[123] Andrew Cruden,et al. Dynamic model of a lead acid battery for use in a domestic fuel cell system , 2006 .
[124] Liu Hong,et al. An explanation of frequency features enabling detection of faults in equally spaced planetary gearbox , 2014 .
[125] Patrick Murphy,et al. NVH Considerations for Zero Emissions Vehicle Driveline Design , 2011 .
[126] Fengshou Gu,et al. Electrical Motor Current Signal Analysis using a Modulation Signal Bispectrum for the Fault Diagnosis of a Gearbox Downstream , 2012 .
[127] Giorgio Bonori,et al. Non-smooth dynamics of spur gears with manufacturing errors , 2007 .
[128] H. W.. The Internal Combustion Engine , 1923, Nature.
[129] Rajendra Singh,et al. Gear noise : anatomy , prediction and solutions , 2009 .
[130] Emine Ayaz,et al. Adaptive neuro-fuzzy inference system for bearing fault detection in induction motors using temperature, current, vibration data , 2009, IEEE EUROCON 2009.
[131] Mihael Cipek,et al. Bond graph analysis of power flow in series-parallel hybrid electric vehicle transmissions , 2010 .