Fe-bearing phase formation, microstructure evolution, and mechanical properties of Al-Mg-Si-Fe alloy fabricated by the twin-roll casting process

[1]  F. Qiu,et al.  Synergistic effects of the TiC nanoparticles and cold rolling on the microstructure and mechanical properties of Al–Cu strips fabricated by twin-roll casting , 2021 .

[2]  Jaehwan Kim,et al.  The nanocluster formation and vacancy behavior of step-quenched Al–Mg–Si alloy and its effect on transition to β" phase via advanced methods , 2021 .

[3]  M. Zha,et al.  Revealing the underlying mechanism of abnormal grain growth in sub-rapid solidified Al-Mg-Si-Fe alloy , 2021 .

[4]  S. Ji,et al.  Improvement in as-cast strength of high pressure die-cast Al–Si–Cu–Mg alloys by synergistic effect of Q-Al5Cu2Mg8Si6 and θ-Al2Cu phases , 2021 .

[5]  Jaehwan Kim,et al.  Nanocluster formation and two-step aging behavior in Al–Mg–Si(-xCu: X = 0–4 mass%) alloys , 2020 .

[6]  C. Mendis,et al.  Heterogeneous nucleation and phase transformation of Fe-rich intermetallic compounds in Al–Mg–Si alloys , 2020 .

[7]  M. Zha,et al.  Effects of Mg contents on the microstructure evolution and Fe–bearing phase selection of Al–Mg–Si–Fe alloys under sub–rapid solidification , 2020 .

[8]  Huiyuan Wang,et al.  Relieving segregation in twin-roll cast Mg–8Al–2Sn–1Zn alloys via controlled rolling , 2020 .

[9]  M. Qian,et al.  Microstructural modification of recycled aluminium alloys by high-intensity ultrasonication: Observations from custom Al–2Si–2Mg–1.2Fe–(0.5,1.0)Mn alloys , 2020, Journal of Alloys and Compounds.

[10]  M. Zha,et al.  Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification , 2020 .

[11]  Yun-lai Deng,et al.  Influence of Zr addition on precipitation evolution and performance of Al-Mg-Si alloy conductor , 2020 .

[12]  Yun-lai Deng,et al.  Eliminating microstructural defects and improving the mechanical and fatigue properties of an Al–Mg–Si alloy extrusion by optimising homogenisation , 2019, Materials Science and Engineering: A.

[13]  O. Rocha,et al.  Tailoring of Processing Parameters, Dendritic Microstructure, Si/Intermetallic Particles and Microhardness in As-cast and Heat-Treated Samples of Al7Si0.3Mg Alloy , 2019, Metals and Materials International.

[14]  Wei Song,et al.  Interactions between Fe-rich intermetallics and Mg-Si phase in Al-7Si-xMg alloys , 2019, Journal of Alloys and Compounds.

[15]  C. Hutchinson,et al.  Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity , 2019, Science.

[16]  A. Ngan,et al.  Origin of double-peak precipitation hardening in metallic alloys , 2018, International Journal of Plasticity.

[17]  T. Carlberg,et al.  In-situ study of phase transformations during homogenization of 6005 and 6082 Al alloys , 2017 .

[18]  J. Qin,et al.  Evolution of Fe–rich phases in Mg melt and a novel method for separating Al and Fe from Al–Si–Fe alloys , 2017 .

[19]  E. Boller,et al.  Formation of intermetallic δ phase in Al-10Si-0.3Fe alloy investigated by in-situ 4D X-ray synchrotron tomography , 2017 .

[20]  Xiangfa Liu,et al.  Influences of Fe, Si and homogenization on electrical conductivity and mechanical properties of dilute Al–Mg–Si alloy , 2016 .

[21]  J. Banhart,et al.  Intermetallic phases in high purity Al-10Si-0.3Fe cast alloys with and without Sr modification studied by FIB tomography and TEM , 2016 .

[22]  Qing Liu,et al.  Effects of high temperature pre-straining on natural aging and bake hardening response of Al–Mg–Si alloys , 2016 .

[23]  N. Provatas,et al.  Cluster evolution mechanisms during aging in Al–Mg–Si alloys , 2016 .

[24]  A. Samuel,et al.  Effect of Fe content on the fracture behaviour of Al–Si–Cu cast alloys , 2014 .

[25]  M. Alizadeh,et al.  Effect of periodic melt shearing process and cooling rate on structure and hardness of Al–0.7Fe aluminum alloy , 2014 .

[26]  P. Grant,et al.  Influence of cooling rate on the Fe intermetallic formation in an AA6063 Al alloy , 2013 .

[27]  F. Gao,et al.  Effect of iron on the microstructure and mechanical property of Al–Mg–Si–Mn and Al–Mg–Si diecast alloys , 2013 .

[28]  E. Sjölander,et al.  The heat treatment of Al–Si–Cu–Mg casting alloys , 2010 .

[29]  S. Hamamda,et al.  Effect of pre-aging and maturing on the precipitation hardening of an Al–Mg–Si alloy , 2010 .

[30]  E. Lavernia,et al.  The rapid solidification processing of materials: science, principles, technology, advances, and applications , 2010 .

[31]  Zhiming Gao,et al.  The role of cooling rate in the microstructure of Al–Fe–Si alloy with high Fe and Si contents , 2009 .

[32]  H. Zandbergen,et al.  The influence of alloy composition on precipitates of the Al−Mg−Si system , 2005 .

[33]  L. Arnberg,et al.  Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization , 2003 .

[34]  C. Davidson,et al.  Solidification and precipitation behaviour of Al-Si-Mg casting alloys , 2001 .

[35]  P. Rometsch,et al.  Mass balance characterisation of Al-7Si-Mg alloy microstructures as a function of solution treatment time , 2001 .

[36]  B. Cantor,et al.  Growth related metastable phase selection in a 6xxx series wrought Al alloy , 2001 .

[37]  D. StJohn,et al.  Influence of Mg Content on the Microstructure and Solid Solution Chemistry of Al-7%Si-Mg Casting Alloys During Solution Treatment , 2000 .