Numerical modelling of the natural ventilation of underground transformer substations

Abstract Ventilation by natural convection of two underground transformer substations has been numerically modelled. The model has been verified in terms of discretization errors and it has been validated with the experimental results of eight temperature rise tests carried out under different conditions of ventilation and transformer power losses. The results of the simulations serve to analyse the air flow pattern and the air temperature distributions inside the substation. A correlation for the air mass flow rate as a function of the ventilation conditions (discharge coefficient and area of the grilles) and the heat dissipated by the transformer has been fitted. The heat transfer coefficients on the surfaces of the transformer and the walls of the enclosure can also be obtained from the simulations of the model. All this information will be used in a future paper to develop a zonal thermal model of the ventilation of the substations that can be employed as a design and optimisation tool.

[1]  Venizelos Efthymiou,et al.  Thermal modeling of power substations using the finite element method , 2010 .

[2]  G. D. Raithby,et al.  A Finite-Volume Method for Predicting a Radiant Heat Transfer in Enclosures With Participating Media , 1990 .

[3]  Marjorie Musy,et al.  Generation of a zonal model to simulate natural convection in a room with a radiative/convective heater , 2001 .

[4]  P. Roache.  Perspective: A Method for Uniform Reporting of Grid Refinement Studies , 1994 .

[5]  T. Jongen,et al.  Design of an unconditionally stable, positive scheme for the K-ϵ and two-layer turbulence models , 1997 .

[6]  C. J. Hoogendoorn,et al.  COMPARISON EXERCISE FOR COMPUTATIONS OF TURBULENT NATURAL CONVECTION IN ENCLOSURES , 1995 .

[7]  Keh-Chin Chang,et al.  A Modified Low-Reynolds-Number Turbulence Model Applicable to Recirculating Flow in Pipe Expansion , 1995 .

[8]  Juan Carlos Ramos,et al.  Numerical modelling of natural convection of oil inside distribution transformers , 2011 .

[9]  G. Raithby,et al.  A multigrid method based on the additive correction strategy , 1986 .

[10]  Ires Iskender,et al.  An improved nonlinear thermal model for MV/LV prefabricated oil-immersed power transformer substations , 2011 .

[11]  O. G. Martynenko,et al.  Handbook of hydraulic resistance , 1986 .

[12]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[13]  Zhengen Ren,et al.  Prediction of indoor gaseous pollutant dispersion by nesting sub-zones within a multizone model , 2003 .

[14]  J. Murthy,et al.  A PRESSURE-BASED METHOD FOR UNSTRUCTURED MESHES , 1997 .

[15]  Taewoo Lee,et al.  Thermal and flow measurements , 2008 .

[16]  Joel H. Ferziger,et al.  Computational methods for fluid dynamics , 1996 .

[17]  Juan Carlos Ramos,et al.  Zonal thermal model of distribution transformer cooling , 2011 .

[18]  S. Maksimovic,et al.  Non-stationary thermal model of indoor transformer stations , 2002 .

[19]  Zoran Radakovic,et al.  Dynamical thermal model of oil transformer placed indoor , 2009 .

[20]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.