Influence of the target composition on reactively sputtered titanium oxide films

Abstract Titanium dioxide thin films have many interesting properties and are used in various applications. High refractive index of titania makes it attractive for the glass coating industry, where it is used in low-emissivity and antireflective coatings. Magnetron sputtering is the most common deposition technique for large area coatings and a high deposition rate is therefore of obvious interest. It has been shown previously that high rate can be achieved using substoichiometric targets. This work deals with reactive magnetron sputtering of titanium oxide films from TiO x targets with different oxygen contents. The deposition rate and hysteresis behaviour are disclosed. Films were prepared at various oxygen flows and all films were deposited onto glass and silicon substrates with no external heating. The elemental compositions and structures of deposited films were evaluated by means of X-ray photoelectron spectroscopy, elastic recoil detection analysis and X-ray diffraction. All deposited films were X-ray amorphous. No significant effect of the target composition on the optical properties of coatings was observed. However, the residual atmosphere is shown to contribute to the oxidation of growing films.

[1]  M. Maitz,et al.  Blood Compatibility of Titanium Oxides with Various Crystal Structure and Element Doping , 2003, Journal of biomaterials applications.

[2]  D. Mergel.  Modeling thin TiO2 films of various densities as an effective optical medium , 2001 .

[3]  S. Y. Kim.  Simultaneous determination of refractive index, extinction coefficient, and void distribution of titanium dioxide thin film by optical methods. , 1996, Applied optics.

[4]  Yasuhiro Shimamoto,et al.  Rutile-type TiO2 thin film for high-k gate insulator , 2003 .

[5]  A. Tanaka,et al.  Formulation for XPS spectral change of oxides by ion bombardment as a function of sputtering time , 2004 .

[6]  D. J. Christie,et al.  Control of reactive sputtering processes , 2005 .

[7]  T. Sajavaara,et al.  Detection efficiency of time-of-flight energy elastic recoil detection analysis systems , 1999 .

[8]  Lijian Meng,et al.  Investigations of titanium oxide films deposited by d.c. reactive magnetron sputtering in different sputtering pressures , 1993 .

[9]  Sören Berg,et al.  High rate reactive magnetron sputter deposition of titanium oxide , 2008 .

[10]  Y. Hayashi,et al.  High rate deposition of TiO2 by DC sputtering of the TiO2−X target , 2001 .

[11]  H. Poelman,et al.  Effect of microstructure and crystallinity on the photocatalytic activity of TiO2 thin films deposited by dc magnetron sputtering , 2007 .

[12]  Ulrike Diebold,et al.  The surface science of titanium dioxide , 2003 .

[13]  I. Salem.  Recent Studies on the Catalytic Activity of Titanium, Zirconium, and Hafnium Oxides , 2003 .

[14]  H. Pulker.  Optical coatings deposited by ion and plasma PVD processes , 1999 .

[15]  G. Marin,et al.  TiO2 films prepared by DC magnetron sputtering from ceramic targets , 2002 .

[16]  G. M. Rao,et al.  dc reactive magnetron sputtering of titanium‐structural and optical characterization of TiO2 films , 1992 .

[17]  T. Girardeau,et al.  SiO2/TiO2 thin films with variable refractive index prepared by ion beam induced and plasma enhanced chemical vapor deposition , 2006 .

[18]  Johan Haemers,et al.  Understanding the discharge voltage behavior during reactive sputtering of oxides , 2007 .

[19]  Lijian Meng,et al.  The effect of substrate temperature on the properties of d.c. reactive magnetron sputtered titanium oxide films , 1993 .

[20]  S. Berg,et al.  Fundamental understanding and modeling of reactive sputtering processes , 2005 .