Curing Method and Mix Design Evaluation of a Styrene-Acrylic Based Liquid Polymer for Sand and Clay Stabilization

AbstractThe curing of soil specimens treated with a liquid polymer soil stabilizer of styrene acrylic family was studied through an extensive laboratory testing program. First, the effect of differ...

[1]  Costas A. Anagnostopoulos,et al.  Laboratory study of an epoxy resin grouted sand , 2004 .

[2]  Jie Huang,et al.  Evaluation of curing method and mix design of a moisture activated polymer for sand stabilization , 2017 .

[3]  W. Azzam.  Reduction of the Shrinkage-Swelling Potential with Polymer Nanocomposite Stabilization , 2012 .

[4]  Tom Scullion,et al.  Hydrated Lime Stabilization of Sulfate-Bearing Vertisols in Texas , 2004 .

[5]  Mohammed S. Imbabi,et al.  Trends and developments in green cement and concrete technology , 2012 .

[6]  Sazzad Bin-Shafique,et al.  Stabilizing sulfate-rich high plasticity clay with moisture activated polymerization , 2016 .

[7]  Wenqian Zhu,et al.  Highly toughened poly (acrylonitrile–styrene–acrylic)/chlorinated polyethylene blends: Mechanical, rheological and thermal properties , 2015 .

[8]  João C. Bordado,et al.  Effect of processing temperature on the bitumen/MDI-PEG reactivity , 2009 .

[9]  C. Vipulanandan,et al.  Compressive and Tensile Behavior of Polymer Treated Sulfate Contaminated CL Soil , 2014, Geotechnical and Geological Engineering.

[10]  Alan F. Rauch,et al.  Mechanisms of Soil Stabilization with Liquid Ionic Stabilizer , 2001 .

[11]  Alan F. Rauch,et al.  Measured Effects of Liquid Soil Stabilizers on Engineering Properties of Clay , 2002 .

[12]  A. B. Moustafa,et al.  Soil stabilization by polymeric materials , 1981 .

[13]  S. .. Naeini,et al.  Effect of Wet and Dry Conditions on Strength of Silty Sand Soils Stabilized with Epoxy Resin Polymer , 2010 .

[14]  Eugene E Jones,et al.  EPOXY-RESIN-BASED CHEMICAL STABILIZATION OF A FINE, POORLY GRADED SOIL SYSTEM , 1991 .

[15]  A. Zandieh,et al.  RETRACTED ARTICLE: Study of Factors Affecting the Compressive Strength of Sandy Soil Stabilized with Polymer , 2010 .

[16]  A. Al-Khanbashi,et al.  Evaluation of three waterborne polymers as stabilizers for sandy soil , 2006 .

[17]  Ehsan Izadi,et al.  Unconfined compressive strength of clayey soils stabilized with waterborne polymer , 2012 .

[18]  Suksun Horpibulsuk,et al.  Strength development in clay–fly ash geopolymer , 2013 .

[19]  C. Anagnostopoulos,et al.  Effect of Epoxy Resin Mixtures on the Physical and Mechanical Properties of Sand , 2014 .

[20]  Gurmel S. Ghataora,et al.  Soil stabilization using proprietary liquid chemical stabilizers: sulphonated oil and a polymer , 2015, Bulletin of Engineering Geology and the Environment.

[21]  A. Al-Khanbashi,et al.  Modification of Sandy Soil Using Water-Borne Polymer , 2003 .

[22]  S. M. Abtahi,et al.  Effect of polyvinyl acetate grout injection on geotechnical properties of fine sand , 2013 .

[23]  Jie Huang,et al.  Performance Evaluation for Polymer-Stabilized Soils , 2017 .

[24]  A. Arulrajah,et al.  Effect of wetting–drying cycles on compressive strength and microstructure of recycled asphalt pavement – Fly ash geopolymer , 2017 .

[25]  J. Tingle,et al.  Stabilization of Silty Sand with Nontraditional Additives , 2002 .