Advanced Multiphase Tribo-Functional PTA Hardfacings

[1]  L. Katona,et al.  High temperature wear of cermet particle reinforced NiCrBSi hardfacings , 2013 .

[2]  H. Winkelmann,et al.  High temperature corrosion studies of cermet particle reinforced NiCrBSi hardfacings , 2013 .

[3]  Fjodor Sergejev,et al.  Abrasive impact wear and surface fatigue wear behaviour of Fe–Cr–C PTA overlays , 2013 .

[4]  Tatyana Karaulova,et al.  Reliability Management of Manufacturing Processes in Machinery Enterprises. Tootmisprotsesside usaldusväärsuse haldamine masinaehituse ettevõtetes , 2012 .

[5]  Peeter Ross,et al.  Access Rights and Organizational Management in Implementation of Estonian Electronic Health Record System. Pääsuõiguste ja organisatsiooniliste meetmete rakendamine Eesti tervise infosüsteemi näitel , 2012 .

[6]  Rein Laaneots,et al.  Laboratory as a Service – A Holistic Framework for Remote and Virtual Labs. Laboratoorium kui teenus – kaug- ja virtuaallaborite holistiline raamistik , 2012 .

[7]  X. Ren,et al.  Fe-24 wt.%Cr-4.1 wt.%C hardfacing alloy: Microstructure and carbide refinement mechanisms with ceria additive , 2012 .

[8]  Martin Eerme,et al.  Synergy Deployment at Early Evaluation of Modularity of the Multi-Agent Production Systems. Sünergia kaasamine modulaarsuse varaseks hindamiseks mitmeagentsete tootmissüsteemide evitamisel , 2012 .

[9]  P. Leech,et al.  Comparison of abrasive wear of a complex high alloy hardfacing deposit and WC–Ni based metal matrix composite , 2012 .

[10]  T. Pihu,et al.  The Impact of Oil Shale Calorific Value on CFB Boiler Thermal Efficiency and Environment. Põlevkivi kütteväärtuse mõju keevkihtkatla efektiivsusele ja keskkonnale , 2012 .

[11]  Jakob Kübarsepp,et al.  Performance of tool materials in blanking. Tööriistamaterjalide toimivus väljalõikestantsimisel , 2012 .

[12]  I. Hussainova,et al.  Advanced chromium carbide-based hardfacings , 2012 .

[13]  M. Antonov,et al.  Erosive wear of advanced composites based on WC , 2012 .

[14]  Maksim Antonov,et al.  Effect of temperature and load on three-body abrasion of cermets and steel , 2012 .

[15]  Aadu Paist,et al.  Reactivity of Woody and Herbaceous Biomass Chars. Puit- ja rohtbiomassi kokside reageerimisvõime , 2011 .

[16]  Hanna Pohjonen,et al.  Data Sharing and Shared Workflow in Medical Imaging , 2011 .

[17]  E. Badisch,et al.  Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions , 2011 .

[18]  J. Kübarsepp,et al.  Oxidation-abrasion of TiC-based cermets in SiC medium , 2011 .

[19]  H. Singh,et al.  Surface engineering analysis of detonation-gun sprayed Cr3C2–NiCr coating under high-temperature oxidation and oxidation–erosion environments , 2011 .

[20]  Rein Laaneots,et al.  Calibration Methods of Coating Thickness Standards. Pindepaksusetalonide kalibreerimismeetodid , 2011 .

[21]  Andres Siirde,et al.  Model for the Analysis of Combined Heat and Power Production. Soojuse ja elektri koostootmise analüüsi mudel , 2011 .

[22]  Tatyana Karaulova,et al.  Fractal Approach for Multiple Project Management in Manufacturing Enterprises. Fraktaalne lähenemine multiprojekti juhtimisel tööstusettevõtetes , 2010 .

[23]  Priit Kulu,et al.  Sliding Wear of PVD Hard Coatings: Fatigue and Measurement Aspects. Õhukeste kõvapinnete liugekulumine: väsimuse ja mõõtmise aspektid , 2010 .

[24]  A. Gerlich,et al.  Influence of alloy chemistry on microstructure and properties in NiCrBSi overlay coatings deposited by plasma transferred arc welding (PTAW) , 2010 .

[25]  H. Danninger,et al.  Effects of interface formation kinetics on the microstructural properties of wear-resistant metal–matrix composites , 2010 .

[26]  M. Antonov,et al.  Cermets surface transformation under erosive and abrasive wear , 2010 .

[27]  M. Roy,et al.  Wear behaviour of hardfaced Fe-Cr-C alloy and austenitic steel under 2-body and 3-body conditions at elevated temperature , 2010 .

[28]  Jüri Pirso,et al.  Novel Methods for Hardmetal Production and Recycling. Uudsed meetodid WC-Co kõvasulamite valmistamiseks ja taaskasutamiseks , 2010 .

[29]  Tiit Hindreus,et al.  Synergy-Based Approach to Quality Assurance , 2010 .

[30]  Weite Wu,et al.  Microstructural and abrasive characteristics of high carbon Fe–Cr–C hardfacing alloy , 2010 .

[31]  A. Neville,et al.  Erosion–corrosion degradation mechanisms of Fe–Cr–C and WC–Fe–Cr–C PTA overlays in concentrated slurries , 2009 .

[32]  M. Antonov,et al.  High temperature erosion of Ti(Mo)C–Ni cermets , 2009 .

[33]  Priit Kulu,et al.  Abrasive Impact Wear : Tester, Wear and Grindability Studies. Abrasiivlöökkulumine: seade, kulumise ja jahvatatavuse uuringud , 2009 .

[34]  G. Fantozzi,et al.  Microstructure and mechanical properties of TiC–TiN based cermets for tools application , 2009 .

[35]  B. James,et al.  The role of microstructure in the high temperature oxidation mechanism of Cr3C2–NiCr composite coatings , 2009 .

[36]  Petri Vuoristo,et al.  Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding , 2009 .

[37]  Wei Niu,et al.  Laser clad TiC reinforced NiCrBSi composite coatings on Ti–6Al–4V alloy using a CW CO2 laser , 2009 .

[38]  Rein Laaneots,et al.  Calibration Methods of Coating Thickness Gauges. Pindepaksuse mõõtevahendite kalibreerimismeetodite uurimine , 2008 .

[39]  S. Sahay.  Book Review: Advanced thermally assisted surface engineering processes , 2008 .

[40]  Friedrich Franek,et al.  The comparison of wear properties of different Fe‐based hardfacing alloys in four kinds of testing methods , 2008 .

[41]  Mart Saarna,et al.  Fatigue Characteristics of PM Steels , 2008 .

[42]  Friedrich Franek,et al.  Behaviour of iron-based hardfacing alloys under abrasion and impact , 2008 .

[43]  E. Badisch,et al.  Influence of welding parameters on microstructure and wear behaviour of a typical NiCrBSi hardfacing alloy reinforced with tungsten carbide , 2008 .

[44]  Rein Küttner,et al.  Integrated Product Development and Production Technology of Large Composite Plastic Products.Suuregabariidiliste komposiidist plastdetailide integreetitud tootearenduse metoodika ja valmistustehnoloogiad , 2008 .

[45]  Jakob Kübarsepp,et al.  Investigation of the Fatigue Mechanics Aspects of PM Hardmetals and Cermets , 2007 .

[46]  Priit Kulu,et al.  Microstructural Aspects of Thermal Sprayed WC-Co Coatings and Ni-Cr Coated Steels , 2007 .

[47]  Jakob Kübarsepp,et al.  Sinter/HIP Technology of TiC-based Cermets , 2007 .

[48]  Ivan Klevtsov,et al.  Assessment of Metal Condition and Remaining Life of In-service Power Plant Components Operating at High Temperature , 2007 .

[49]  Rein Küttner,et al.  Rapid Prototyping of Sheet Metal Components with Incremental Sheet Forming Technology.Lehtmetallist komponentide kiirvalmistuse sammvormimistehnoloogia , 2007 .

[50]  M. Antonov,et al.  Assessment of mechanically mixed layer developed during high temperature erosion of cermets , 2007 .

[51]  P. H. Shipway,et al.  Microstructure and abrasive wear behaviour of shielded metal arc welding hardfacings used in the sugarcane industry , 2007 .

[52]  Mart Tamre,et al.  Model Based Mechatronic Systems Modeling Methodology in Conceptual Design Stage.Mudelitel baseeruv mehhatroonikasüsteemide modelleerimise metoodika kontseptuaalse projekteerimise faasis , 2007 .

[53]  Jüri Lavrentjev,et al.  Experimental Methods for Sound Propagation Studies in Automotive Duct Systems , 2007 .

[54]  Priit Kulu,et al.  Recycling of Composite Plastics , 2006 .

[55]  Z. Zou,et al.  Fabricating TiC particles reinforced Fe-based composite coatings produced by GTAW multi-layers melting process , 2006 .

[56]  T. Pal,et al.  Solid particle erosion behaviour of hardfacing deposits on cast iron—Influence of deposit microstructure and erodent particles , 2006 .

[57]  Jyri Papstel,et al.  Models for Monitoring of Technological Processes and Production Systems. Tehnoloogiliste protsesside ja tootmissüsteemide monitooringu mudelid , 2006 .

[58]  Rui Vilar,et al.  Abrasive wear behaviour of laser clad and flame sprayed-melted NiCrBSi coatings , 2006 .

[59]  M. C. Marshall,et al.  High toughness high hardness iron based PTAW weld materials , 2006 .

[60]  B. Mellor.  Surface Coatings for Protection against Wear , 2006 .

[61]  Aadu Paist,et al.  Deposition of Solid Particles from Aerosol Flow in Laminar Flat-Plate Boundary Layer , 2006 .

[62]  Shengrong Yang,et al.  Tribological behavior of TiCN-based cermets at elevated temperatures , 2006 .

[63]  J. Murthy,et al.  Abrasive wear behaviour of WC–CoCr and Cr3C2–20(NiCr) deposited by HVOF and detonation spray processes , 2006 .

[64]  A. D’Oliveira,et al.  Pulsed current plasma transferred arc hardfacing , 2006 .

[65]  Alejandro Toro,et al.  The effect of microstructure on abrasive wear of hardfacing alloys , 2005 .

[66]  Vello Reedik,et al.  Synergy-based approach to design of the interdisciplinary systems , 2005 .

[67]  M. Zhong,et al.  TiC reinforced composite coating produced by powder feeding laser cladding , 2004 .

[68]  Jong-ku Park,et al.  Mechanochemical synthesis of nanocomposite powder for ultrafine (Ti, Mo)C-Ni cermet without core-rim structure , 2004 .

[69]  Milan Brandt,et al.  Abrasive wear performance and microstructure of laser clad WC/Ni layers , 2004 .

[70]  N. Chen,et al.  Fabrication of nickel composite coatings reinforced with TiC particles by laser cladding , 2003 .

[71]  I. Hussainova.  Effect of microstructure on the erosive wear of titanium carbide-based cermets , 2003 .

[72]  De-hong Lu,et al.  The effect of volume fraction of WC particles on erosion resistance of WC reinforced iron matrix surface composites , 2003 .

[73]  H. Sōda,et al.  Microstructure and mechanical properties of Fe–Cr–C eutectic composites , 2003 .

[74]  R. Colaço,et al.  A model for the abrasive wear of metallic matrix particle-reinforced materials , 2003 .

[75]  Dokyol Lee,et al.  Effect of molybdenum on the microstructure and wear resistance of cobalt-base Stellite hardfacing alloys , 2003 .

[76]  A. Conde,et al.  Cladding of Ni–Cr–B–Si coatings with a high power diode laser , 2002 .

[77]  Fujie Li,et al.  Laser cladding of stainless steel with Ni–Cr3C2 for improved wear performance , 2001 .

[78]  J. Kübarsepp,et al.  Behaviour of TiC-base cermets in different wear conditions , 2001 .

[79]  A. Menéndez,et al.  High temperature erosion wear of flame and plasma-sprayed nickel–chromium coatings under simulated coal-fired boiler atmospheres , 2001 .

[80]  P. Kulu,et al.  Wear resistance of thermal sprayed coatings on the base of recycled hardmetal , 2000 .

[81]  Braham Prakash,et al.  High temperature friction and wear characteristics of various coating materials for steam valve spindle application , 2000 .

[82]  Z. Dawei,et al.  Laser cladding of Ni-Cr3C2/(Ni + Cr) composite coating , 1998 .

[83]  J. Hawk,et al.  Solidification structure and abrasion resistance of high chromium white irons , 1997 .

[84]  H. Berns.  Microstructural properties of wear-resistant alloys , 1995 .

[85]  George M. Pharr,et al.  On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation , 1992 .

[86]  F. Nenci,et al.  Microstructural aspects of wear-resistant stellite and colmonoy coatings by laser processing , 1987 .

[87]  K. Gahr,et al.  Microstructure and Wear of Materials , 1987 .

[88]  E. Adoberg,et al.  Coatings and surface engineering. Industry oriented research , 2012 .

[89]  E. Mehhanotehnika,et al.  Long-Range Navigation for Unmanned Off-Road Ground Vehicle , 2012 .

[90]  T. Velsker,et al.  Design Optimization of Steel and Glass Structures , 2012 .

[91]  H. Danninger,et al.  PREPARATION AND PROPERTIES OF SINTERED Fe AND Ni BASED MMCs REINFORCED WITH FUSED TUNGSTEN CARBIDE PARTICLES , 2012 .

[92]  H. Klaasen,et al.  Wear performance of WC- and TiC-based ceramic-metallic composites , 2011, Proccedings of International Scientific Conference "BALTTRIB 2019".

[93]  Igor Krupenski,et al.  Numerical Simulation of Two-Phase Turbulent Flows in Ash Circulating Fluidized Bed , 2010 .

[94]  V. Mikli,et al.  Wear resistance of laser remelted thermally sprayed coatings , 2009 .

[95]  K. Juhani,et al.  Reactive Sintered Chromium and Titanium Carbide-Based Cermets , 2009 .

[96]  B. Straumal,et al.  Exothermically Synthesized B4C-Al Composites for Dry Sliding , 2008 .

[97]  I. Preis,et al.  Fatigue Performance and Mechanical Reliability of Cemented Carbides , 2007 .

[98]  K. Acker,et al.  Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings , 2005 .

[99]  J. Resev,et al.  Torque distribution control unit in automotive propulsion systems , 2004, Proceedings of the Estonian Academy of Sciences. Engineering.

[100]  T. Pihl,et al.  Applications of recycled hardmetal powder , 2003, Proceedings of the Estonian Academy of Sciences. Engineering.

[101]  C. Subramanian,et al.  Metal-matrix composite coatings by PTA surfacing , 1998 .

[102]  Joseph R. Davis,et al.  Welding, brazing, and soldering , 1993 .

[103]  Joseph R. Davis,et al.  Friction, lubrication, and wear technology , 1992 .

[104]  J. Bulloch,et al.  Some considerations of wear and hardfacing materials , 1991 .