Implementing Lean in Engineer- to-Order Manufacturing: Experiences from a ETO Manufacturer

This chapter reviews the state of the art in engineer-to-order production and non-repetitive production to give an overview of existing research and applications of Lean in this sector. Afterwards, a real case study at a medium-sized ETO manufacturer shows an approach to implement Lean Production in such a non-repetitive manufacturing environment. The experiences from the case study illustrate that the suitability of certain lean methods, such as value stream mapping or Kanban is limited, while other lean methods, such as 5S, CIP, or a material-oriented layout, brought significant changes. In the consolida tion phase of the Lean production system, the authors defined a Lean-Toolset with the most suitable lean methods for engineer-to-order manufacturing systems. A core aspect of the Lean implementation was the desired mind-change of the employees. The chapter closes with a short description of the achieved results in the case study and gives an outlook to further research activities.

[1]  George Norman,et al.  The role of logistics in the materials flow control process , 1998 .

[2]  Vaibhav Gupta,et al.  Application of value stream mapping for lean operations and cycle time reduction: an Indian case study , 2005 .

[3]  Andrew J. Crowley.  Construction as a manufacturing process: Lessons from the automotive industry , 1998 .

[4]  Ash Genaidy,et al.  Moving from lean manufacturing to lean construction: Toward a common sociotechnological framework , 2005 .

[5]  Luis Felipe Romero Dessens,et al.  Use of Value Mapping Tools for Manufacturing Systems Redesign , 2012 .

[6]  Per Erik Eriksson,et al.  Improving construction supply chain collaboration and performance: a lean construction pilot project , 2010 .

[7]  H. Papoutsakis.  Sharing Scientific and Social Knowledge in a Performance Oriented Industry: An Evaluation Model , 2011 .

[8]  Li-Ren Yang.  Key practices, manufacturing capability and attainment of manufacturing goals: The perspective of project/engineer-to-order manufacturing , 2013 .

[9]  Bimal Nepal,et al.  Improving manufacturing process for biomedical products: a case study , 2011 .

[10]  Marco Tantardini,et al.  A lean-based ORR system for non-repetitive manufacturing , 2012 .

[11]  L. Koskela.  Is structural change the primary solution to the problems of construction? , 2003 .

[12]  A. Andijani.  Trade‐off between maximizing throughput rate and minimizing system time in kanban systems , 1997 .

[13]  Gulshan Chauhan,et al.  Measuring parameters of lean manufacturing realization , 2012 .

[14]  Omar I. Alhawari.  Operator Assignment Decisions in a Highly Dynamic Cellular Environment , 2008 .

[15]  Dominik T. Matt,et al.  Template based production system design , 2008 .

[16]  Damian George,et al.  Improvement of manufacturing operations at a pharmaceutical company , 2011 .

[17]  Richard Lee Storch,et al.  A non-sequential just-in-time simulation model , 1996 .

[18]  Prashanth B. Nagendra,et al.  MRP/sfx: A kanban-oriented shop floor extension to MRP , 1999 .

[19]  Nitin Seth,et al.  Application of value stream mapping (VSM) for minimization of wastes in the processing side of supply chain of cottonseed oil industry in Indian context , 2008 .

[20]  Alok K. Verma,et al.  An Integrated Lean Implementation Model for Fleet Repair and Maintenance , 2004 .

[21]  Ye Li,et al.  From value stream mapping toward a lean/sigma continuous improvement process: an industrial case study , 2010 .

[22]  Mustafa Özbayrak,et al.  Leanness: experiences from the journey to date , 2005 .

[23]  Andrea Chiarini,et al.  Lean production: mistakes and limitations of accounting systems inside the SME sector , 2012 .

[24]  Stuart D. Green,et al.  Lean construction: arenas of enactment, models of diffusion and the meaning of ‘leanness’ , 2005 .

[25]  William E. Youngdahl,et al.  “Lean” service: in defense of a production‐line approach , 1998 .

[26]  Yuehwern Yih,et al.  Generic kanban systems for dynamic environments , 1994 .

[27]  Robert Kagan,et al.  Implementing Lean Manufacturing in High-mix Production Environment , 2006, APMS.

[28]  Anders Bystedt,et al.  Interaction in the construction process—System effects for a joinery-products supplier , 2011 .

[29]  M. Naim,et al.  An innovative supply chain strategy for customized housing , 2003 .

[30]  Thomas Neitzert,et al.  Value Stream Mapping (VSM) in a manufacture-to-order small and medium enterprise , 2008 .

[31]  N. Singh,et al.  Modelling and Analysis of Just‐in‐Time Manufacturing Systems: A Review , 1992 .

[32]  Jack R. Meredith,et al.  Characterizing and structuring a new make-to-forecast production strategy , 2007 .

[33]  Stephen Emmitt,et al.  Lost in transition: the transfer of lean manufacturing to construction , 2008 .

[34]  D. T. Matt,et al.  Adaptation of the value stream optimization approach to collaborative company networks in the construction industry , 2013 .

[35]  Gerhard Girmscheid.  Industrialization in building construction , 2005 .

[36]  Christian Hicks,et al.  Planning Complex Engineer-To-Order Products , 2003 .

[37]  Gregory A. Howell,et al.  Lean project management , 2003 .

[38]  Marcello Braglia,et al.  A new value stream mapping approach for complex production systems , 2006 .

[39]  David Gann,et al.  Construction as a manufacturing process? Similarities and differences between industrialized housing and car production in Japan , 1996 .

[40]  Cathal Heavey,et al.  A review and comparison of hybrid and pull-type production control strategies , 2005 .

[41]  K. I. Gidado,et al.  Project complexity: The focal point of construction production planning , 1996 .

[42]  Jwm Will Bertrand,et al.  Production control in engineer-to-order firms , 1993 .

[43]  Marco Tantardini,et al.  Lean Production implementation: a comparison between repetitive and non repetitive companies. , 2008 .

[44]  Wallace J. Hopp,et al.  To Pull or Not to Pull: What Is the Question? , 2004, Manuf. Serv. Oper. Manag..

[45]  Peter T. Ward,et al.  Fit, Flexibility and Performance in Manufacturing: Coping with Dynamic Environments , 2004 .

[46]  Peter T. Ward,et al.  Lean manufacturing: context, practice bundles, and performance , 2003 .

[47]  Dana L Nelson-Peterson,et al.  Creating an Environment for Caring Using Lean Principles of the Virginia Mason Production System , 2007, Journal of Nursing Administration.

[48]  Lars Stehn,et al.  Lean principles in industrialized housing production: the need for a cultural change , 2008 .

[49]  P. Hines,et al.  Learning to evolve: A review of contemporary lean thinking , 2004 .