Kinematics and Experiments of a Life-Sized Masticatory Robot for Characterizing Food Texture

A life-sized masticatory robot, which is intended to chew foods in a human way while the food properties are evaluated, of a 6RSS parallel mechanism is discussed in this paper. A robotic mechanism is proposed, and its kinematic parameters are defined according to the biomechanical findings and measurements of the human masticatory system. For a given mandibular trajectory to be tracked, the closed-form solution to inverse kinematics of the robot is found for joint actuations, whereas differential kinematics is derived in Jacobian matrices. Major features of the robot, including the motion control system, are presented. Experimental results for free chewing, soft-food chewing, and hard-food chewing are given where the foods are simulated by foam and hard objects, and crank actuations and driving torques (an indication of muscular activities) required are compared for the chewing of different foods.

[1]  Atsuo Takanishi,et al.  Mouth opening and closing training with 6-DOF parallel robot , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[2]  Edgar Flores,et al.  Design of a 6 degree of freedom anthropomorphic robotic jaw , 2005 .

[3]  Atsuo Takanishi,et al.  Integrated dental robot system for mouth opening and closing training , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[4]  Weiliang Xu,et al.  Jaw mechanism modeling and simulation , 2005 .

[5]  A. Takanishi,et al.  Dental robotics and human model , 2003, First International IEEE EMBS Conference on Neural Engineering, 2003. Conference Proceedings..

[6]  Atsuo Takanishi,et al.  Jaw training robot and its clinical results , 2003, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003).

[7]  Phillip J. McKerrow,et al.  Introduction to robotics , 1991 .

[8]  Atsuo Takanishi,et al.  Control of rapid closing motion of a robot jaw using nonlinear spring mechanism , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[9]  Atsuo Takanishi,et al.  Quantification of masticatory efficiency with a mastication robot , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[10]  T. van Eijden,et al.  Architecture of the human jaw‐closing and jaw‐opening muscles , 1997, The Anatomical record.

[11]  Gustavo V. Barbosa-Cánovas,et al.  Engineering and food for the 21st century , 2002 .

[12]  Yuichi Matsumoto,et al.  Analysis and experimental validation of force bandwidth for force control , 2006, IEEE Transactions on Industrial Electronics.

[13]  Weiliang Xu,et al.  Choosing new ways to chew: a robotic model of the human masticatory system for reproducing chewing behaviors , 2005, IEEE Robotics & Automation Magazine.

[14]  M. C. Bourne.  18 Relationship between Rheology and Food Texture , 2002 .

[15]  Toyohiko Hayashi,et al.  Development of 2-D Jaw Movement Simulator (JSN/S1) , 1998, J. Robotics Mechatronics.

[16]  Atsuo Takanishi,et al.  Adaptive masticatory jaw motion using jaw position and biting force information , 1994, Proceedings of 1994 IEEE International Conference on MFI '94. Multisensor Fusion and Integration for Intelligent Systems.

[17]  A. Woda,et al.  Effects of increased hardness on jaw movement and muscle activity during chewing of visco-elastic model foods , 2001, Experimental Brain Research.

[18]  Yoshio Nakano,et al.  A clinical jaw movement training robot for lateral movement training , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[19]  A. Takanishi,et al.  Development of 3 DOF jaw robot WJ-2 as a human's mastication simulator , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[20]  John J. Craig,et al.  Introduction to robotics - mechanics and control (2. ed.) , 1989 .

[21]  C. Gosselin,et al.  The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator , 1988 .

[22]  Weiliang Xu,et al.  Contact transition control via joint acceleration feedback , 2000, IEEE Trans. Ind. Electron..

[23]  Atsuo Takanishi,et al.  Development of a mastication robot using nonlinear viscoelastic mechanism , 1997, Proceedings of the 1997 IEEE/RSJ International Conference on Intelligent Robot and Systems. Innovative Robotics for Real-World Applications. IROS '97.

[24]  Weiliang Xu,et al.  Design of a Biologically Inspired Parallel Robot for Foods Chewing , 2008, IEEE Transactions on Industrial Electronics.