Successful Use of Real Time Dynamic Flow Modelling to Control a Very Challenging Managed Pressure Drilling Operation in the North Sea

An advanced dynamic flow and temperature model was used to optimize and control MPD operations in real time on the Gullfaks field in the North Sea. The well to be drilled only had a 7 bar window between the pore and fracture pressure according to prognosis. However, drilling objectives were eventually fulfilled aided by very accurate downhole pressure control. This paper addresses the model specific challenges, analyzes the differences between model calculations and downhole pressure data, and discusses how to bring hydraulic modelling further in accordance with future operational needs. Challenges related to how to tune the system efficiently and accurately, data quality issues, displacement operations, etc., are described and enlightened by downhole memory data made available when the string was back on surface. Ideas on how to build a more robust and easy to use system without sacrificing the advantages of having a high fidelity model in the real time loop are discussed. The experience and ideas described contribute to the development of a very accurate and reliable MPD system, which is capable of automatic pressure control during the whole sequence of drilling, tripping, circulation, displacements etc. An important goal for the future will be to reduce the offshore crew dedicated to the modelling function to a minimum, with the provision of onshore support during operations.