A Reconfigurable Quad-Band CMOS Class E Power Amplifier for Mobile and Wireless Applications

This paper proposes a new design technique for a reconfigurable CMOS Class E power amplifier (PA) by selectively activating the transistor cells in the array of power transistors. The activated transistors will be used for amplification and the non-activated transistors will be used for input/output matching and switching capacitance for Class E operation. The quad-band PA for 1.9/2.3/2.6/3.5 GHz has been implemented in a 0.18 μm CMOS technology using the technique without any switch or tunable circuit. This PA obtains output powers of 24.2/23.8/23.4/ 20.5 dBm and efficiency of 48.2/44.3/40.9/35.6% at 1.9/2.3/2.6/ 3.5 GHz. The total MMIC chip size is as small as 0.92 × 1.75 mm2 for the reconfigurable quad-band operation.

[1]  A.V. Grebennikov,et al.  Class E with parallel circuit - a new challenge for high-efficiency RF and microwave power amplifiers , 2002, 2002 IEEE MTT-S International Microwave Symposium Digest (Cat. No.02CH37278).

[2]  Sung Min Park,et al.  Parasitic Capacitance Optimization of GaAs HBT Class E Power Amplifier for High Efficiency CDMA EER Transmitter , 2007, 2007 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium.

[3]  Atsushi Fukuda,et al.  A novel reconfigurable quad-band power amplifier with reconfigurable biasing network and LTCC substrates , 2008, 2008 IEEE MTT-S International Microwave Symposium Digest.

[4]  Feipeng Wang,et al.  An Improved Power-Added Efficiency 19-dBm Hybrid Envelope Elimination and Restoration Power Amplifier for 802.11g WLAN Applications , 2006, IEEE Transactions on Microwave Theory and Techniques.

[5]  Peter M. Asbeck,et al.  A 25-dBm high-efficiency digitally-modulated SOI CMOS power amplifier for multi-standard RF polar transmitters , 2009, 2009 IEEE Radio Frequency Integrated Circuits Symposium.

[6]  R. Pullela,et al.  Quad-band GSM/GPRS/EDGE polar loop transmitter , 2004, IEEE Journal of Solid-State Circuits.

[7]  Chunna Zhang,et al.  A novel reconfigurable power amplifier structure for multi-band and multi-mode portable wireless applications using a reconfigurable die and a switchable output matching network , 2009, 2009 IEEE MTT-S International Microwave Symposium Digest.

[8]  A.W. Hietala.  A quad-band 8PSK/GMSK polar transceiver , 2006, IEEE Journal of Solid-State Circuits.

[9]  F. Murden,et al.  A polar modulator transmitter for GSM/EDGE , 2004, IEEE Journal of Solid-State Circuits.

[10]  A. Akhnoukh,et al.  Adaptive Multi-Band Multi-Mode Power Amplifier Using Integrated Varactor-Based Tunable Matching Networks , 2006, IEEE Journal of Solid-State Circuits.