Superhydrophobic concrete surfaces with integrated microtexture

Abstract Ultra-High Performance Concrete (UHPC) is characterized by a densely packed mix-design, which can offer attractive surface properties for architectural building facades. A technical challenge for aesthetic applications is the protection against fouling. This work demonstrates that water-repellent concrete can be obtained just after demoulding by replicating the features of micro-pillared moulds made of polydimethylsiloxane (PDMS). Moreover, the negative replica of the microtextured UHPC surface can be used as a master to template for other UHPC samples, constituting a cost-effective route to fabricate large-scale microtextured concrete pieces. The chemical functionalization of UHPC with a low surface energy material is obtained by transferring residues from the PDMS mould or by spraying siloxane-based compounds to form a homogenous surface film. The latter preparation method showed superhydrophobic properties with static contact angles reaching up to 164° and contact angle hysteresis reaching as low as 2.5°. This process enables the manufacture of water-repelling, self-cleaning concrete. Raindrops slide off the concrete surface, carrying debris away.

[1]  Nele De Belie,et al.  Titanium dioxide based strategies to prevent algal fouling on cementitious materials , 2013 .

[2]  Matthieu Horgnies,et al.  Influence of the surface properties of concrete on the adhesion of coating: Characterization of the interface by peel test and FT-IR spectroscopy , 2011 .

[3]  Bharat Bhushan,et al.  Biomimetics: lessons from nature–an overview , 2009, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[4]  David Quéré,et al.  Rough ideas on wetting , 2002 .

[5]  I. Zuburtikudis,et al.  Surface Properties of Superhydrophobic Coatings for Stone Protection , 2009 .

[6]  Nele De Belie,et al.  Evaluation of strategies to prevent algal fouling on white architectural and cellular concrete , 2009 .

[7]  W. Zisman,et al.  Contact angle, wettability, and adhesion , 1964 .

[8]  Kazuhito Hashimoto,et al.  Effects of Surface Structure on the Hydrophobicity and Sliding Behavior of Water Droplets , 2002 .

[9]  E. Darque-Ceretti,et al.  Surfactant-induced growth of a calcium hydroxide coating at the concrete surface , 2012, Journal of Coatings Technology and Research.

[10]  E. Darque-Ceretti,et al.  XPS investigation of the composition of the external surface of concrete after demoulding, cleaning and carbonation , 2013 .

[11]  Pietro Lura,et al.  Ethyl silicate for surface treatment of concrete – Part II: Characteristics and performance , 2012 .

[12]  Fabrication of durable hydrophobic surfaces through surface texturing , 2011 .

[13]  Peter Walzel,et al.  Wetting and self-cleaning properties of artificial superhydrophobic surfaces. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[14]  D. Quéré,et al.  On water repellency , 2005 .

[15]  Uwe Thiele,et al.  Wetting of textured surfaces , 2002 .

[16]  Bharat Bhushan,et al.  Roughness optimization for biomimetic superhydrophobic surfaces , 2005 .

[17]  C. R. Speck,et al.  Superhydrophobic surfaces by replication of micro/nano-structures fabricated by ultrafast-laser-microtexturing , 2013 .

[18]  Pierre-Claude Aitcin,et al.  HOW THE WATER-CEMENT RATIO AFFECTS CONCRETE STRENGTH , 2003 .

[19]  A. Fujishima,et al.  TiO2 photocatalysis and related surface phenomena , 2008 .

[20]  J. Mertz,et al.  Algal colonization kinetics on roofing and façade tiles: Influence of physical parameters , 2013 .

[21]  Chi Sun Poon,et al.  Influence of silane-based water repellent on the durability properties of recycled aggregate concrete , 2013 .

[22]  Jianfang Wang,et al.  Effect of surface microstructure on the hydrophobicity of coatings , 2012 .

[23]  G. McHale,et al.  Contact-angle hysteresis on super-hydrophobic surfaces. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[24]  G. Karagiannis,et al.  Impregnation and superhydrophobicity of coated porous low-fired clay building materials , 2011 .

[25]  A. Cassie,et al.  Wettability of porous surfaces , 1944 .

[26]  R. H. Dettre,et al.  Contact Angle Hysteresis: I. Study of an Idealized Rough Surface , 1964 .

[27]  Chi Sun Poon,et al.  Photocatalytic construction and building materials: From fundamentals to applications , 2009 .

[28]  David Quéré,et al.  Microfabricated textured surfaces for super-hydrophobicity investigations , 2005 .

[29]  Wilhelm Barthlott,et al.  Characterization and Distribution of Water-repellent, Self-cleaning Plant Surfaces , 1997 .

[30]  C. Vernet,et al.  Ultra-Durable Concretes: Structure at the Micro- and Nanoscale , 2004 .

[31]  R. N. Wenzel.  RESISTANCE OF SOLID SURFACES TO WETTING BY WATER , 1936 .

[32]  M. Khorasani,et al.  Wettability of porous polydimethylsiloxane surface: morphology study , 2005 .

[33]  P. Maravelaki-Kalaitzaki,et al.  TiO2–SiO2–PDMS nano-composite hydrophobic coating with self-cleaning properties for marble protection , 2013 .

[34]  B. Widom.  Capillarity and Wetting Phenomena: Drops, Bubbles, Pearls, Waves , 2003 .