Polymer Pre‐Aggregation Enables Optimal Morphology and High Performance in All‐Polymer Solar Cells

[1]  Yongfang Li,et al.  11.2% Efficiency all-polymer solar cells with high open-circuit voltage , 2019, Science China Chemistry.

[2]  F. Liu,et al.  A generic green solvent concept boosting the power conversion efficiency of all-polymer solar cells to 11% , 2019, Energy & Environmental Science.

[3]  H. Ade,et al.  Efficient All-Polymer Solar Cells based on a New Polymer Acceptor Achieving 10.3% Power Conversion Efficiency , 2019, ACS Energy Letters.

[4]  Yongfang Li,et al.  Highly Flexible and Efficient All-Polymer Solar Cells with High-Viscosity Processing Polymer Additive toward Potential of Stretchable Devices. , 2018, Angewandte Chemie.

[5]  Yongfang Li,et al.  Efficient and thermally stable all-polymer solar cells based on a fluorinated wide-bandgap polymer donor with high crystallinity , 2018 .

[6]  H. Ade,et al.  Effect of Ring‐Fusion on Miscibility and Domain Purity: Key Factors Determining the Performance of PDI‐Based Nonfullerene Organic Solar Cells , 2018, Advanced Energy Materials.

[7]  Zhi-qiang Fu,et al.  On the understanding of energetic disorder, charge recombination and voltage losses in all-polymer solar cells , 2018 .

[8]  C. Brabec,et al.  Morphology Optimization via Side Chain Engineering Enables All-Polymer Solar Cells with Excellent Fill Factor and Stability. , 2018, Journal of the American Chemical Society.

[9]  Chuanxiang Sheng,et al.  Improved Charge Generation via Ultrafast Effective Hole‐Transfer in All‐Polymer Photovoltaic Blends with Large Highest Occupied Molecular Orbital (HOMO) Energy Offset and Proper Crystal Orientation , 2018, Advanced Functional Materials.

[10]  M. Ford,et al.  Thermally Stable All‐Polymer Solar Cells with High Tolerance on Blend Ratios , 2018 .

[11]  G. Wang,et al.  Photoactive Blend Morphology Engineering through Systematically Tuning Aggregation in All‐Polymer Solar Cells , 2018 .

[12]  Bumjoon J. Kim,et al.  Comparative Study of the Mechanical Properties of All-Polymer and Fullerene–Polymer Solar Cells: The Importance of Polymer Acceptors for High Fracture Resistance , 2018 .

[13]  Joshua H. Carpenter,et al.  Quantitative relations between interaction parameter, miscibility and function in organic solar cells , 2018, Nature Materials.

[14]  F. Liu,et al.  All‐Polymer Solar Cells Based on a Conjugated Polymer Containing Siloxane‐Functionalized Side Chains with Efficiency over 10% , 2017, Advanced materials.

[15]  H. Ade,et al.  Quantitative Morphology–Performance Correlations in Organic Solar Cells: Insights from Soft X‐Ray Scattering , 2017 .

[16]  O. Inganäs,et al.  Charge Transport in Pure and Mixed Phases in Organic Solar Cells , 2017 .

[17]  Fei Huang,et al.  Optimisation of processing solvent and molecular weight for the production of green-solvent-processed all-polymer solar cells with a power conversion efficiency over 9% , 2017 .

[18]  G. Bazan,et al.  Comparing the device physics, dynamics and morphology of polymer solar cells employing conventional PCBM and non-fullerene polymer acceptor N2200 , 2017 .

[19]  Joshua H. Carpenter,et al.  High‐Efficiency Nonfullerene Organic Solar Cells: Critical Factors that Affect Complex Multi‐Length Scale Morphology and Device Performance , 2017 .

[20]  O. Inganäs,et al.  High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing. , 2016, Journal of the American Chemical Society.

[21]  M. Ford,et al.  Improved All‐Polymer Solar Cell Performance by Using Matched Polymer Acceptor , 2016 .

[22]  Bumjoon J. Kim,et al.  Correlation between Phase-Separated Domain Sizes of Active Layer and Photovoltaic Performances in All-Polymer Solar Cells , 2016 .

[23]  Jianqi Zhang,et al.  All‐Polymer Solar Cells Based on Absorption‐Complementary Polymer Donor and Acceptor with High Power Conversion Efficiency of 8.27% , 2016, Advanced materials.

[24]  Yanchun Han,et al.  Donor/Acceptor Molecular Orientation-Dependent Photovoltaic Performance in All-Polymer Solar Cells. , 2015, ACS applied materials & interfaces.

[25]  Jun Peng,et al.  Combinative Effect of Additive and Thermal Annealing Processes Delivers High Efficiency All-Polymer Solar Cells , 2015 .

[26]  Cheng Wang,et al.  Flexible, highly efficient all-polymer solar cells , 2015, Nature Communications.

[27]  Jianyu Yuan,et al.  High efficiency all-polymer solar cells realized by the synergistic effect between the polymer side-chain structure and solvent additive , 2015 .

[28]  Bumjoon J. Kim,et al.  Determining the role of polymer molecular weight for high-performance all-polymer solar cells: its effect on polymer aggregation and phase separation. , 2015, Journal of the American Chemical Society.

[29]  P. Liu,et al.  High‐Efficiency All‐Polymer Solar Cells Based on a Pair of Crystalline Low‐Bandgap Polymers , 2014, Advanced materials.

[30]  M. Kim,et al.  Donor–Acceptor Alternating Copolymer Nanowires for Highly Efficient Organic Solar Cells , 2014, Advanced materials.

[31]  Zhihua Chen,et al.  Tuning the morphology of all-polymer OPVS through altering polymer-solvent interactions , 2014 .

[32]  J. Behrends,et al.  Correlated Donor/Acceptor Crystal Orientation Controls Photocurrent Generation in All‐Polymer Solar Cells , 2014 .

[33]  S. Fabiano,et al.  Charge Transport Orthogonality in All‐Polymer Blend Transistors, Diodes, and Solar Cells , 2014 .

[34]  B. Collins,et al.  The role of regioregularity, crystallinity, and chain orientation on electron transport in a high-mobility n-type copolymer. , 2014, Journal of the American Chemical Society.

[35]  Robert P. H. Chang,et al.  Morphology‐Performance Relationships in High‐Efficiency All‐Polymer Solar Cells , 2014 .

[36]  Daisuke Mori,et al.  Low‐Bandgap Donor/Acceptor Polymer Blend Solar Cells with Efficiency Exceeding 4% , 2014 .

[37]  A. Facchetti,et al.  Aggregation in a high-mobility n-type low-bandgap copolymer with implications on semicrystalline morphology. , 2012, Journal of the American Chemical Society.

[38]  Anna Köhler,et al.  An order-disorder transition in the conjugated polymer MEH-PPV. , 2012, Journal of the American Chemical Society.

[39]  H. Sirringhaus,et al.  Polymer Blend Solar Cells Based on a High‐Mobility Naphthalenediimide‐Based Polymer Acceptor: Device Physics, Photophysics and Morphology , 2011 .

[40]  Detlef-M Smilgies,et al.  Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors. , 2009, Journal of applied crystallography.

[41]  A. Facchetti,et al.  A high-mobility electron-transporting polymer for printed transistors , 2009, Nature.

[42]  J. F. Ryder,et al.  Shear thinning in dilute polymer solutions. , 2006, The Journal of chemical physics.

[43]  Kurt Kremer,et al.  Rheology and Microscopic Topology of Entangled Polymeric Liquids , 2004, Science.

[44]  Zhenan Bao,et al.  Understanding the Impact of Oligomeric Polystyrene Side Chain Arrangement on the All‐Polymer Solar Cell Performance , 2018 .