Characterization of a rotary hybrid multimodal energy harvester

In this study, experimental characterizations of a new hybrid energy harvesting device consisting of piezoelectric and electromagnetic transducers are presented. The generator, to be worn on the legs or arms of a person, harnesses linear motion and impact forces from human motion to generate electrical energy. The device consists of an unbalanced rotor made of three piezoelectric beams which have permanent magnets attached to the ends. Impact forces cause the beams to vibrate, generating a voltage across their electrodes and linear motion causes the rotor to spin. As the rotor spins, the magnets pass over ten electromagnetic coils mounted to the base, inducing a current through the wire. Several design related issues were investigated experimentally in order to optimize the hybrid device for maximum power generation. Further experiments were conducted on the system to characterize the energy harvesting capabilities of the device, all of which are presented in this study.

[1]  Chengkuo Lee,et al.  A new S-shaped MEMS PZT cantilever for energy harvesting from low frequency vibrations below 30 Hz , 2012 .

[2]  Qingguo Li,et al.  Biomechanical energy harvesting: Apparatus and method , 2008, 2008 IEEE International Conference on Robotics and Automation.

[3]  Xueliang Huang,et al.  A Vibration-Based Hybrid Energy Harvester for Wireless Sensor Systems , 2012, IEEE Transactions on Magnetics.

[4]  Peng Zeng,et al.  Kinetic Energy Harvesting Using Piezoelectric and Electromagnetic Technologies—State of the Art , 2010, IEEE Transactions on Industrial Electronics.

[5]  Kwang-Seok Yun,et al.  Piezoelectric shell structures as wearable energy harvesters for effective power generation at low-frequency movement , 2012 .

[6]  Yu-Jen Wang,et al.  System Design of a Weighted-Pendulum-Type Electromagnetic Generator for Harvesting Energy From a Rotating Wheel , 2013, IEEE/ASME Transactions on Mechatronics.

[7]  M. Neuman,et al.  Rotational energy harvester for body motion , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[8]  E. Nakamachi,et al.  Development of enhanced piezoelectric energy harvester induced by human motion , 2012, 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[9]  D.P. Arnold,et al.  Review of Microscale Magnetic Power Generation , 2007, IEEE Transactions on Magnetics.

[10]  Fuh-Gwo Yuan,et al.  A magnetically levitated vibration energy harvester , 2013 .

[11]  Daniel J. Inman,et al.  Energy Harvesting Technologies , 2008 .

[12]  Yonas Tadesse,et al.  HM-EH-RT: hybrid multimodal energy harvesting from rotational and translational motions , 2013 .

[13]  Peng Zeng,et al.  A Permanent-Magnet Linear Motion Driven Kinetic Energy Harvester , 2013, IEEE Transactions on Industrial Electronics.

[14]  Byeng D. Youn,et al.  A New Energy Harvesting Design Concept: Multimodal Energy Harvesting Skin , 2010 .

[15]  Chengkuo Lee,et al.  Feasibility study of a 3D vibration-driven electromagnetic MEMS energy harvester with multiple vibration modes , 2012 .

[16]  Timothy C. Green,et al.  Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices , 2008, Proceedings of the IEEE.

[17]  Raul Morais,et al.  Double permanent magnet vibration power generator for smart hip prosthesis , 2011 .

[18]  J. Shields Power Generation by Harvesting Ambient Energy with a Micro-Electromagnetic Generator , 2009 .

[19]  Soobum Lee,et al.  A new piezoelectric energy harvesting design concept: multimodal energy harvesting skin , 2011, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[20]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[21]  L. Zuo,et al.  Energy-harvesting shock absorber with a mechanical motion rectifier , 2013 .

[22]  Yonas Tadesse,et al.  Rotary Multimodal Energy Harvesting Device , 2013 .

[23]  Yiannis Andreopoulos,et al.  The performance of a self-excited fluidic energy harvester , 2012 .

[24]  Gwiy-Sang Chung,et al.  Low frequency driven electromagnetic energy harvester for self-powered system , 2012 .