The effect of high solid solution Mg contents (7–13 wt%) on the dynamic strain aging behavior of Al–Mg alloys

[1]  Deliang Zhang,et al.  Influence of Mg on tensile deformation behavior of high Mg-content Al-Mg alloys , 2022, International Journal of Plasticity.

[2]  Hong Wang,et al.  Sc/Zr ratio-dependent mechanisms of strength evolution and microstructural thermal stability of multi-scale hetero-structured Al–Mg–Sc–Zr alloys , 2022, Journal of Materials Science & Technology.

[3]  Hong Wang,et al.  Large hardening response mediated by room-temperature dynamic solute clustering behavior in a dilute Mg-Zn-Ca-Sn-Mn alloy , 2022, Acta Materialia.

[4]  Nobuo Nakada,et al.  Serrated Flow Accompanied with Dynamic Type Transition of the Portevin–Le Chatelier Effect in Austenitic Stainless Steel , 2022, SSRN Electronic Journal.

[5]  M. Javidani,et al.  Effect of Mn content on the hot deformation behavior and microstructure evolution of Al–Mg–Mn 5xxx alloys , 2022, Materials Science and Engineering: A.

[6]  Jianglin Lan,et al.  Si-Assisted Solidification Path and Microstructure Control of 7075 Aluminum Alloy with Improved Mechanical Properties by Selective Laser Melting , 2022, Acta Metallurgica Sinica (English Letters).

[7]  Gang Liu,et al.  A critical review on the Portevin-Le Chatelier effect in aluminum alloys , 2022, Journal of Central South University.

[8]  M. Zha,et al.  Influences of the Al3Sc particle content on the evolution of bimodal grain structure and mechanical properties of Al–Mg–Sc alloys processed by hard-plate rolling , 2020 .

[9]  L. Zhuang,et al.  Zn/Cu regulated critical strain and serrated flow behavior in Al–Mg alloys , 2020, Materials Science and Engineering: A.

[10]  P. Manach,et al.  A persistent modal plastic model for instabilities in Al–Mg alloys with 1D application , 2020 .

[11]  Ethan N. Epperly,et al.  Transient solute drag and strain aging of dislocations , 2020 .

[12]  X. P. Chen,et al.  Multifractal analyses of serrated flow in friction stir processed Al–Mg–Sc alloy , 2020 .

[13]  J. Seol,et al.  The mechanism of dynamic strain aging for type A serrations in tensile flow curves of Fe-18Mn-0.55C (wt.%) twinning-induced plasticity steel , 2020 .

[14]  P. Manach,et al.  Macroscopic consequences of Piobert–Lüders and Portevin–Le Chatelier bands during tensile deformation in Al-Mg alloys , 2019, Materials Science and Engineering: A.

[15]  Woo Jin Kim,et al.  Significant strengthening in superlight Al-Mg alloy with an exceptionally large amount of Mg (13 wt%) after cold rolling , 2019, Materials Science and Engineering: A.

[16]  D. Zhemchuzhnikova,et al.  Interrelation between the Portevin Le-Chatelier effect and necking in AlMg alloys , 2018, International Journal of Plasticity.

[17]  M. Zha,et al.  High strength and ductile high solid solution Al–Mg alloy processed by a novel hard-plate rolling route , 2017 .

[18]  C. G. Park,et al.  Deformation rate controls atomic-scale dynamic strain aging and phase transformation in high Mn TRIP steels , 2017 .

[19]  C. Fressengeas,et al.  On the strain rate dependence of the critical strain for plastic instabilities in Al-Mg alloys , 2017 .

[20]  J. Lewandowski,et al.  Improved understanding of environment-induced cracking (EIC) of sensitized 5XXX series aluminium alloys , 2017 .

[21]  M. Lebyodkin,et al.  Role of Self-Organization of Dislocations in the Onset and Kinetics of Macroscopic Plastic Instability , 2017, Metallurgical and Materials Transactions A.

[22]  R. Bjørge,et al.  High ductility bulk nanostructured Al–Mg binary alloy processed by equal channel angular pressing and inter-pass annealing , 2015 .

[23]  G. Ananthakrishna,et al.  Correlation between band propagation property and the nature of serrations in the Portevin–Le Chatelier effect , 2015 .

[24]  C. Fressengeas,et al.  On the effects of the Mg content on the critical strain for the jerky flow of Al-Mg alloys , 2015 .

[25]  R. Bjørge,et al.  Microstructure evolution and mechanical behavior of a binary Al–7Mg alloy processed by equal-channel angular pressing , 2015 .

[26]  R. Mishra,et al.  Flow stress and work-hardening behaviour of Al–Mg binary alloys , 2015 .

[27]  Shiteng Zhao,et al.  Influence of severe plastic deformation on dynamic strain aging of ultrafine grained Al–Mg alloys , 2014 .

[28]  R. Bjørge,et al.  Achieve high ductility and strength in an Al–Mg alloy by severe plastic deformation combined with inter-pass annealing , 2014 .

[29]  Qingchuan Zhang,et al.  Two mechanisms for the normal and inverse behaviors of the critical strain for the Portevin–Le Chatelier effect , 2012 .

[30]  M. Mazière,et al.  Investigations on the Portevin Le Chatelier critical strain in an aluminum alloy , 2012 .

[31]  Qingchuan Zhang,et al.  Thermal analyses and simulations of the type A and type B Portevin–Le Chatelier effects in an Al–Mg alloy , 2012 .

[32]  Y. Estrin,et al.  Geometrically non-linear modeling of the Portevin–Le Chatelier effect , 2009 .

[33]  M. Lebyodkin,et al.  Effect of deformation geometry on the intermittent plastic flow associated with the Portevin-Le Chatelier effect , 2008 .

[34]  J. Gubicza,et al.  Plastic instabilities and dislocation densities during plastic deformation in Al–Mg alloys , 2007 .

[35]  C. Fressengeas,et al.  Spatiotemporal aspects of jerky flow in Al–Mg alloys, in relation with the Mg content , 2006 .

[36]  R. C. Picu.  A mechanism for the negative strain-rate sensitivity of dilute solid solutions , 2004 .

[37]  F. J. Humphreys,et al.  Production of ultra-fine grain microstructures in Al–Mg alloys by coventional rolling , 2002 .

[38]  P. McCormick.  Theory of flow localisation due to dynamic strain ageing , 1988 .

[39]  Tsuneo Takahashi,et al.  Modulated structures and GP Zones in Al-Mg Alloys , 1982 .

[40]  Xun Liu,et al.  The effects of ultrasonic vibration on Portevin–Le Chatelier (PLC) effect and stress-strain behavior in aluminum alloy 2024 , 2023, Scripta Materialia.

[41]  Yakun Xu,et al.  Observation of Portevin-Le Chatelier Serrations in 6061-O Aluminum Alloy Under Ultra-Low-Frequency Vibration-Assisted Tension , 2022, SSRN Electronic Journal.

[42]  E. Kozeschnik,et al.  State parameter-based constitutive modelling of stress strain curves in Al-Mg solid solutions , 2018 .