Microencapsulated phase change materials with high heat capacity and high cyclic durability for high-temperature thermal energy storage and transportation

Latent heat storage (LHS) technology employing phase change materials (PCMs) has received great attention as an alternative to conventional solid sensible heat storage (SHS) for future high-temperature energy utilisation systems. In this study, we report the synthesis of a core-shell type microencapsulated PCM (MEPCM) consisting of Al-25wt% Si microspheres (mean diameter of 36.3μm and melting temperature of 577°C) as the core (PCM) and Al2O3 as the shell. The MEPCM was prepared in two steps involving (1) the formation of an AlOOH precursor shell on the PCM microspheres by a hydroxide precipitation process in hot water and (2) heat-oxidation treatment in an O2 atmosphere to form a stable Al2O3 shell. In particular, the effects of heat-oxidation temperature on the shell morphology, shell crystal structure, mechanical strength, heat capacity, and cyclic durability of the prepared MEPCMs were examined. The resultant MEPCM is composed of a stable α-Al2O3 shell and Al-25wt% Si core with an effective void inside the core to allow for volume expansion of the PCMs during solid-liquid phase transitions. The heat capacity measured for this material is five times higher than that of conventional solid SHS materials. Additionally, the MEPCM exhibits excellent durability up to 300 heating and cooling cycles under oxygen atmosphere. Consequently, it can potentially be used in the next-generation LHS-based high-temperature thermal energy storage and transportation systems.

[1]  Mónica Delgado,et al.  Review on phase change material emulsions and microencapsulated phase change material slurries: Materials, heat transfer studies and applications , 2012 .

[2]  Ahmed Elgafy,et al.  Graphite foams infiltrated with phase change materials as alternative materials for space and terrestrial thermal energy storage applications , 2008 .

[3]  A. Sari,et al.  Preparation, thermal properties and thermal reliability of microencapsulated n-eicosane as novel phase change material for thermal energy storage , 2011 .

[4]  Tatsuya Kodama,et al.  Steam reforming of methane using double-walled reformer tubes containing high-temperature thermal storage Na2CO3/MgO composites for solar fuel production , 2014 .

[5]  Haitao Wang,et al.  Polymer/graphene oxide composite microcapsules with greatly improved barrier properties , 2016 .

[6]  Yinping Zhang,et al.  Preparation of n-tetradecane-containing microcapsules with different shell materials by phase separation method , 2009 .

[7]  E. Hahne,et al.  Thermophysical properties of the composite ceramic-salt system (SiO2 /Na2SO4) , 1993 .

[8]  Nobuhiro Maruoka,et al.  Exergy recovery from steelmaking off-gas by latent heat storage for methanol production , 2006 .

[9]  T. Akiyama,et al.  Microencapsulation of Metal-based Phase Change Material for High-temperature Thermal Energy Storage , 2015, Scientific Reports.

[10]  A. Sari,et al.  Preparation, characterization, and thermal properties of microencapsulated phase change material for thermal energy storage , 2009 .

[11]  Hongguang Jin,et al.  A NEW ADVANCED POWER-GENERATION SYSTEM USING CHEMICAL-LOOPING COMBUSTION , 1994 .

[12]  Ya-Ling He,et al.  Numerical study on performance of molten salt phase change thermal energy storage system with enhanced tubes , 2012 .

[13]  Huanzhi Zhang,et al.  Silica encapsulation of n-octadecane via sol-gel process: a novel microencapsulated phase-change material with enhanced thermal conductivity and performance. , 2010, Journal of colloid and interface science.

[14]  T. Akiyama,et al.  Heat storage in direct-contact heat exchanger with phase change material , 2013 .

[15]  Hiroyuki Hatano,et al.  High-density circulating fluidized bed gasifier for advanced IGCC/IGFC—Advantages and challenges , 2010 .

[16]  Xiaodong Wang,et al.  Microencapsulation of n-dodecane into zirconia shell doped with rare earth: Design and synthesis of bifunctional microcapsules for photoluminescence enhancement and thermal energy storage , 2016 .

[17]  Md. Zahidul Islam,et al.  Preparation of poly(divinylbenzene) microencapsulated octadecane by microsuspension polymerization: oil droplets generated by phase inversion emulsification , 2013 .

[18]  Jian-jun Sun,et al.  Thermal reliability test of Al-34%Mg-6%Zn alloy as latent heat storage material and corrosion of metal with respect to thermal cycling , 2007 .

[19]  L. Fan,et al.  Chemical looping processes for CO2 capture and carbonaceous fuel conversion – prospect and opportunity , 2012 .

[20]  A. Sari,et al.  Microencapsulated n-octacosane as phase change material for thermal energy storage , 2009 .

[21]  Xingrong Zeng,et al.  Preparation, characterization and thermal properties of nanocapsules containing phase change material n-dodecanol by miniemulsion polymerization with polymerizable emulsifier , 2012 .

[22]  J. Hayashi,et al.  Gasification of Low-Rank Solid Fuels with Thermochemical Energy Recuperation for Hydrogen Production and Power Generation , 2006 .

[23]  H. Paksoy,et al.  Microencapsulation of caprylic acid with different wall materials as phase change material for thermal energy storage , 2014 .

[24]  L. Cabeza,et al.  Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review , 2016 .

[25]  Wenguo Xiang,et al.  Investigation of coal gasification hydrogen and electricity co-production plant with three-reactors chemical looping process , 2010 .

[26]  Zhengguo Zhang,et al.  Preparation and properties of graphene oxide-modified poly(melamine-formaldehyde) microcapsules containing phase change material n-dodecanol for thermal energy storage , 2015 .

[27]  Zhang Zhibin,et al.  Microencapsulation of butyl stearate as a phase change material by interfacial polycondensation in a polyurea system , 2009 .

[28]  Changying Zhao,et al.  Thermo-mechanical analysis of ceramic encapsulated phase-change-material (PCM) particles , 2011 .

[29]  D. Zheng,et al.  Evaluation of a chemical-looping-combustion power-generation system by graphic exergy analysis , 1987 .

[30]  Xiaoguang Ma,et al.  Encapsulation of copper-based phase change materials for high temperature thermal energy storage , 2014 .

[31]  T. Akiyama,et al.  Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high-temperature thermal energy storage , 2016 .

[32]  Zhongpin Zhang,et al.  Diverting phase transition of high-melting-point stearic acid to room temperature by microencapsulation in boehmite , 2013 .

[33]  Masato Tanaka,et al.  Preparation of Microcapsules Containing Erythritol with Interfacial Polycondensation Reaction by Using the (W/O) Emulsion , 2014 .

[34]  X. Py,et al.  Corrosion effects between molten salts and thermal storage material for concentrated solar power plants , 2012 .

[35]  A. Sari,et al.  Preparation, characterization and thermal properties of PMMA/n-heptadecane microcapsules as novel solid-liquid microPCM for thermal energy storage , 2010 .

[36]  A. Barber,et al.  Synthesis and characterization of microcapsules containing Rubitherm®RT27 obtained by spray drying , 2011 .

[37]  Zhaowen Huang,et al.  Thermal property measurement and heat storage analysis of LiNO3/KCl – expanded graphite composite phase change material , 2014 .

[38]  A. M. López-Buendía,et al.  Thermal properties of a novel nanoencapsulated phase change material for thermal energy storage , 2013 .

[39]  Robert Pitz-Paal,et al.  Technologies and trends in solar power and fuels , 2011 .

[40]  Ming-Chang Lu,et al.  Tunable endothermic plateau for enhancing thermal energy storage obtained using binary metal alloy particles , 2016 .

[41]  T. Akiyama,et al.  Thermal analysis of Al–Si alloys as high-temperature phase-change material and their corrosion properties with ceramic materials , 2016 .

[42]  Weilong Wang,et al.  Thermal conductivities and characteristics of ternary eutectic chloride/expanded graphite thermal energy storage composites , 2015 .

[43]  Xiaodong Wang,et al.  Synthesis and properties of microencapsulated n-octadecane with polyurea shells containing different soft segments for heat energy storage and thermal regulation , 2009 .

[44]  M. Romero,et al.  Concentrating solar thermal power and thermochemical fuels , 2012 .

[45]  Liang-Shih Fan,et al.  Clean coal conversion processes – progress and challenges , 2008 .

[46]  S. M. Hasnain.  Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques , 1998 .

[47]  G. Song,et al.  Fabrication and properties of microencapsulated n-octadecane with TiO2 shell as thermal energy storage materials , 2016 .

[48]  L. Ventolà,et al.  Phase Change Materials (PCM) microcapsules with different shell compositions: Preparation, characterization and thermal stability , 2010 .

[49]  Antonella Meneghetti,et al.  PCM-based energy recovery from electric arc furnaces , 2014 .

[50]  Xiaodong Wang,et al.  Microencapsulation of n-octadecane phase change material with calcium carbonate shell for enhancement of thermal conductivity and serving durability: Synthesis, microstructure, and performance evaluation , 2014 .

[51]  N. Kayukawa,et al.  Characteristics of microencapsulated PCM slurry as a heat‐transfer fluid , 1999 .

[52]  Tingyu Wang,et al.  Preparation, characterization, and thermal properties of the microencapsulation of a hydrated salt as phase change energy storage materials , 2013 .

[53]  D. Brandon,et al.  Metastable alumina polymorphs : Crystal structures and transition sequences , 2005 .

[54]  Chi‐Hwa Wang,et al.  Mixing behaviors of cold–hot particles in the downer of a triple-bed combined circulating fluidized bed , 2012 .

[55]  Haitao Wang,et al.  Encapsulated phase change materials stabilized by modified graphene oxide , 2014 .

[56]  J. Newman,et al.  A hybrid solar-redox scheme for liquid fuel and hydrogen coproduction , 2014 .

[57]  Lei Cao,et al.  Preparation and characteristics of microencapsulated stearic acid as composite thermal energy storage material in buildings , 2013 .

[58]  G. Fang,et al.  Synthesis and Characterization of Microencapsulated Paraffin Microcapsules as Shape-Stabilized Thermal Energy Storage Materials , 2013 .