Conceptual Design of Compliant Mechanisms for Flapping Wings with Topology Optimization

This work discusses the integration of two previously disparate research areas: topology optimization of compliant mechanisms and flapping wing vehicles. The efficient actuation of the latter is considerably challenging, with competing weight, energy, and authority requirements; intuitive design strategies are not typically available for the aeroelastic physics that define the flapping system. We discuss the incorporation of these physics into a gradient-based topological optimization scheme, to design thrust-optimal compliant flapping mechanisms. This is done with a nonlinear dynamical finite element model incorporating both the mechanism and the wing structure, coupling elastic, inertial, aerodynamic, and actuator forces. Several optimal mechanism topologies are presented, along with a detailed discussion of the relevant flapping physics driving the design process.

[1]  Bret Stanford,et al.  Analytical Sensitivity Analysis of an Unsteady Vortex Lattice Method for Flapping Wing Optimization , 2009 .

[2]  T. Daniel,et al.  Into thin air: contributions of aerodynamic and inertial-elastic forces to wing bending in the hawkmoth Manduca sexta , 2003, Journal of Experimental Biology.

[3]  Gordon J. Berman,et al.  Energy-minimizing kinematics in hovering insect flight , 2007, Journal of Fluid Mechanics.

[4]  Koji Isogai,et al.  Optimum Aeroelastic Design of a Flapping Wing , 2007 .

[5]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[6]  Carlos E. S. Cesnik,et al.  Computational aerodynamics of low Reynolds number plunging, pitching and flexible wings for MAV applications , 2008 .

[7]  Chih-Ming Ho,et al.  Unsteady aerodynamics and flow control for flapping wing flyers , 2003 .

[8]  C. T. Bolsman,et al.  Design Overview of a Resonant Wing Actuation Mechanism for Application in Flapping Wing MAVs , 2009 .

[9]  Dmitri Tcherniak,et al.  Topology optimization of resonating structures using SIMP method , 2002 .

[10]  Kurt Maute,et al.  Integrated Multidisciplinary Topology Optimization Approach to Adaptive Wing Design , 2006 .

[11]  Cheng-Kuei Hsu,et al.  Development of Flapping Wing Micro Air Vehicles -Design, CFD, Experiment and Actual Flight , 2010 .

[12]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .

[13]  R. Haftka,et al.  Elements of Structural Optimization , 1984 .

[14]  T. E. Bruns,et al.  Topology optimization of non-linear elastic structures and compliant mechanisms , 2001 .

[15]  John F. Hall,et al.  Problems encountered from the use (or misuse) of Rayleigh damping , 2006 .

[16]  K. Maute,et al.  Conceptual design of aeroelastic structures by topology optimization , 2004 .

[17]  Tomonari Furukawa,et al.  Design of an active flapping wing mechanism and a micro aerial vehicle using a rotary actuator , 2010 .

[18]  Robert J. Wood,et al.  Towards flapping wing control for a micromechanical flying insect , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[19]  John Young,et al.  Flapping Wing Aerodynamics: Progress and Challenges , 2008 .

[20]  Noboru Kikuchi,et al.  Optimal topology design of structures under dynamic loads , 1999 .

[21]  A. Bottaro,et al.  Optimization of the motion of a flapping airfoil using sensitivity functions , 2009 .

[22]  Thomas A. Poulsen.  A simple scheme to prevent checkerboard patterns and one-node connected hinges in topology optimization , 2002 .

[23]  Peter Ifju,et al.  Flapping Wing Structural Deformation and Thrust Correlation Study with Flexible Membrane Wings , 2010 .

[24]  Tanakorn Tantanawat,et al.  Design of Compliant Mechanisms for Minimizing Input Power in Dynamic Applications , 2007 .

[25]  Noboru Kikuchi,et al.  Optima topology design of structures under dynamic loads , 1999 .

[26]  Satyandra K. Gupta,et al.  Integrated Product and Process Design for a Flapping Wing Drive Mechanism , 2009 .

[27]  Richard G. Cobb,et al.  Frequency Response of a Micro Air Vehicle Wing Flapping Mechanism to Non-Harmonic Forcing , 2010 .

[28]  Hao Liu,et al.  Recent progress in flapping wing aerodynamics and aeroelasticity , 2010 .

[29]  Sunil K. Agrawal,et al.  Biologically Inspired Design Of Small Flapping Wing Air Vehicles Using Four-Bar Mechanisms And Quasi-steady Aerodynamics , 2005 .

[30]  Bret Stanford,et al.  Formulation of Analytical Design Derivatives for Nonlinear Unsteady Aeroelasticity , 2010 .

[31]  Ole Sigmund,et al.  Topology synthesis of large‐displacement compliant mechanisms , 2001 .

[32]  T. Buhl.  Simultaneous topology optimization of structure and supports , 2002 .

[33]  Kyung K. Choi,et al.  DESIGN SENSITIVITY ANALYSIS AND OPTIMIZATION OF NONLINEAR TRANSIENT DYNAMICS* , 2000 .

[34]  Peter Ifju,et al.  Aeroelastic topology optimization of membrane structures for micro air vehicles , 2008 .

[35]  Bret Stanford,et al.  Shape, Structure, and Kinematic Parameterization of a Power-Optimal Hovering Wing , 2010 .

[36]  J. P. Khatait,et al.  Compliant design for flapping mechanism: A minimum torque approach , 2006 .

[37]  Bret Stanford,et al.  Adjoint sensitivities of time-periodic nonlinear structural dynamics via model reduction , 2010 .