Virtual sensing of structural vibrations using dynamic substructuring

Abstract Virtual sensing techniques use information available from a limited set of physical sensors together with the finite element model to calculate an estimate of the quantity of interest. In structural dynamics applications, analytical mode shapes from the finite element model are typically used as a basis to estimate the response at unmeasured locations by an expansion algorithm. An alternative is to model only the interesting part of the structure using substructuring techniques, in which the natural modes are replaced by component modes consisting of a selected number of fixed interface modes plus the interface constraint modes. They are mutually independent and compose a valid subspace for estimating the unmeasured response. If the number of interface degrees of freedom is large, interface reduction is applied. The main advantage of the proposed approach is that the modelling effort can be substantially decreased, because only part of the structure is modelled and the modelling uncertainties, non-linearities, or changes in the omitted structure can be ignored. The method is validated by numerical simulations of three different structures under unknown excitation. Different types and locations of virtual sensors are studied. Also, the effects of noise and model errors are investigated. The most accurate estimation is obtained if the virtual sensor is located away from the interface and close to a physical sensor.

[1]  Peter Avitabile,et al.  Full-Field Dynamic Stress/Strain from Limited Sets of Measured Data , 2011 .

[2]  Aldo Sestieri,et al.  A Unified Approach to Substructuring and Structural Modification Problems , 2004 .

[3]  Annalisa Fregolent,et al.  Inverse dynamic substructuring using the direct hybrid assembly in the frequency domain , 2014 .

[4]  D. Rixen,et al.  General Framework for Dynamic Substructuring: History, Review and Classification of Techniques , 2008 .

[5]  Sten Bay Jørgensen,et al.  A systematic approach for soft sensor development , 2007, Comput. Chem. Eng..

[6]  Matej Sulitka,et al.  Application of Krylov Reduction Technique for a Machine Tool Multibody Modelling , 2014 .

[7]  Jyrki Kullaa,et al.  Sensor validation using minimum mean square error estimation , 2010 .

[8]  C. Papadimitriou,et al.  A dual Kalman filter approach for state estimation via output-only acceleration measurements , 2015 .

[9]  Costas Papadimitriou,et al.  Fatigue predictions in entire body of metallic structures from a limited number of vibration sensors using Kalman filtering , 2011 .

[10]  Peter Avitabile,et al.  Comparison of Full Field Strain Distributions to Predicted Strain Distributions from Limited Sets of Measured Data for SHM Applications , 2013 .

[11]  Jyrki Kullaa,et al.  COMBINED EMPIRICAL AND ANALYTICAL VIRTUAL SENSING IN STRUCTURAL DYNAMICS FOR UNCERTAINTY REDUCTION , 2015 .

[12]  Rune Brincker,et al.  Determination of Stress Histories in Structures by Natural Input Modal Analysis , 2005 .

[13]  D. Rixen.  A dual Craig-Bampton method for dynamic substructuring , 2004 .

[14]  Geert Lombaert,et al.  Online Response Estimation in Structural Dynamics , 2014 .

[15]  Lothar Gaul,et al.  Substructuring including interface reduction for the efficient vibro-acoustic simulation of fluid-filled piping systems , 2010 .