New flux weakening control for high saliency interior permanent magnet synchronous machine without any tables

This paper presents a new flux weakening algorithm for high saliency Interior Permanent Magnet Synchronous Machine. The proposed method modifies the current reference not by look-up tables, but by a controller in order to achieve a flux weakening. The current reference modification is determined by the d-q axis current and output voltage using the gradient descent method. The proposed method consists of two part, the determination of the flux weakening region and the current reference modification. The flux weakening region is determined by the angle between the constant torque direction and the voltage decreasing direction, and the current reference is modified by the flux weakening direction and the voltage magnitude according to the flux weakening region. Moreover, this method can be applied to the infinite speed drive system as well as the fininite speed drive system. The feasibility of the proposed method has been verified by the experimental results.

[1]  Anuradha M. Annaswamy,et al.  Robust Adaptive Control , 1984, 1984 American Control Conference.

[2]  T.A. Lipo,et al.  Power capability of salient pole permanent magnet synchronous motors in variable speed drive applications , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[3]  S. Morimoto,et al.  Expansion of operating limits for permanent magnet motor by current vector control considering inverter capacity , 1990 .

[4]  A. K. Adnanes.  Torque analysis of permanent magnet synchronous motors , 1991, PESC '91 Record 22nd Annual IEEE Power Electronics Specialists Conference.

[5]  T.J.E. Miller,et al.  Field-weakening performance of brushless synchronous AC motor drives , 1994 .

[6]  Seung-Ki Sul,et al.  Speed control of interior permanent magnet synchronous motor drive for flux weakening operation , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[7]  Seung-Ki Sul,et al.  Speed control of interior permanent magnet synchronous motor drive for the flux weakening operation , 1997 .

[8]  N. Bianchi,et al.  Parameters and volt-ampere ratings of a synchronous motor drive for flux-weakening applications , 1997 .

[9]  T.M. Jahns,et al.  A new control technique for achieving wide constant power speed operation with an interior PM alternator machine , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[10]  Seung-Ki Sul,et al.  New field weakening technique for high saliency interior permanent magnet motor , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..