Ways to reduce the negative consequences of the thermal expansion coefficient mismatch of a carbon-carbon composite and a protective silicide coating

[1]  Q. Fu,et al.  Surface modification of carbon/carbon composites and in-situ grown SiC nanowires to enhance the thermal cycling performance of Si-Mo-Cr coating under parallel oxyacetylene torch , 2016 .

[2]  I. Gnesin,et al.  Phase composition of melt-quenched carbon doped tungsten silicides , 2016, Inorganic Materials: Applied Research.

[3]  S. Moon,et al.  Hafnium carbide protective layer coatings on carbon/carbon composites deposited with a vacuum plasma spray coating method , 2016 .

[4]  Hejun Li,et al.  Blasting treatment and chemical vapor deposition of SiC nanowires to enhance the thermal shock resistance of SiC coating for carbon/carbon composites in combustion environment , 2016 .

[5]  Hejun Li,et al.  Oxidation pre-treatment and electrophoretic deposition of SiC nanowires to improve the thermal shock resistance of SiC coating for C/C composites , 2015 .

[6]  Xiaohong Shi,et al.  Erosion resistance of Mo–Si–Cr coating-modified C/C composites in a wind tunnel at 1873K , 2015 .

[7]  Hejun Li,et al.  Improvement of the bonding strength and the oxidation resistance of SiC coating on C/C composites by pre-oxidation treatment , 2014 .

[8]  Hejun Li,et al.  Improvement in oxidation properties of SiC-coated carbon/carbon composites through modification of the SiC/carbon interface , 2014 .

[9]  I. Gnesin,et al.  The interaction of carbon with Mo5Si3 and W5Si3 silicides. Nowotny phase synthesis , 2013 .

[10]  A. Nekrasov,et al.  The silicide coatings (Mo,W)Si2+(Mo,W)5Si3 on graphite, interaction with carbon , 2013 .

[11]  Xiaohong Shi,et al.  Oxidation and ablation resistance of ZrB2–SiC–Si/B-modified SiC coating for carbon/carbon composites , 2013 .

[12]  Xiaohong Shi,et al.  B2O3 modified SiC–MoSi2 oxidation resistant coating for carbon/carbon composites by a two-step pack cementation , 2009 .

[13]  Hejun Li,et al.  A Si–Mo–W Coating to Protect SiC-Coated Carbon/Carbon Composites Against Oxidation , 2009 .

[14]  R. W. Rauser,et al.  Oxidation through coating cracks of SiC-protected carbon/carbon , 2008 .

[15]  Erica L. Corral,et al.  Ultra‐High‐Temperature Ceramic Coatings for Oxidation Protection of Carbon–Carbon Composites , 2008 .

[16]  C. A. Nunes,et al.  Thermal expansion of the V5Si3 and T2 phases of the V–Si–B system investigated by high-temperature X-ray diffraction , 2007 .

[17]  Li Kezhi,et al.  Silicide coating for protection of C/C composites at 1873 K , 2006 .

[18]  Donald M. Curry,et al.  Oxidation microstructure studies of reinforced carbon/carbon , 2006 .

[19]  Peter Morgan,et al.  Carbon Fibers and Their Composites , 2005 .

[20]  K. Ito,et al.  Physical and mechanical properties of single crystals of the Mo5Si3C phase , 2003 .

[21]  Monica Ferraris,et al.  Multilayer coating with self-sealing properties for carbon-carbon composites , 2003 .

[22]  G. Blount,et al.  Carbon-carbon composites: a summary of recent developments and applications , 1997 .

[23]  G. Savage.  Carbon-carbon composites , 1993 .

[24]  A. Vasudévan,et al.  A comparative overview of molybdenum disilicide composites , 1992 .

[25]  R. C. Bradt,et al.  Thermal expansion of the cubic (3C) polytype of SiC , 1986 .

[26]  Ervin E. Underwood,et al.  Quantitative Stereology for Microstructural Analysis , 1973 .

[27]  H. Nowotny,et al.  Das Dreistoffsystem: Molybd?n?Silizium?Kohlenstoff , 1954 .