Estimating upper limb discomfort level due to intermittent isometric pronation torque with various combinations of elbow angles, forearm rotation angles, force and frequency with upper arm at 90° abduction

Abstract Industrial jobs involving upper arm abduction have a strong association with musculoskeletal disorders and injury. But there is still paucity of data on the different risk factors that are responsible for the genesis of such disorders or injuries. The current laboratory study is an attempt in that direction. Thirty-six right-handed male university students participated in a full factorial model of three forearm rotation angles (60% prone and supine and neutral range of motion), three elbow angles (45°, 90° and 135°), two exertion frequencies (10 and 20/min) and two levels of pronation torque (10% and 20% MVC). Discomfort rating after each five-minute treatment was recorded on a visual analogue scale. Repeated measures ANCOVA with grip endurance time as a covariate indicated that forearm rotation angle ( p =0.001), elbow flexion angle ( p =0.016), MVC torque ( p =0.001) and frequency ( p =0.049) were significant. Grip endurance time was not significant ( p =0.74). EMG activity of the Pronator Teres (PT) and the Extensor Carpi Radialis Brevis (ECRB) revealed that both muscles were affected by forearm rotation and level of MVC torque. A supplementary experiment in which MVC pronation torque at different articulations was measured showed that some of the increased discomfort appeared to be due to increased relative MVC at some of the extreme articulations. The findings indicated that, with the upper arm in abduction, an elbow angle of 45° and forearm prone, are a posture vulnerable to injury and should be avoided. Grip endurance time as a covariate warrants further investigation. Relevance to industry There is still a paucity of data on risk factors for musculoskeletal disorders for upper arm articulations typical of industrial jobs, especially postures involving upper arm abduction. Industrial jobs involving upper arm abduction have a strong association with injury as operators must often maintain static upper arm abduction while performing tasks for long durations. This study presents discomfort and pronation torque MVC data at different upper arm articulations to identify and control high-risk tasks in industry well before they develop into Musculoskeletal Disorders, especially at the design stage when using biomechanical models.

[1]  S H Snook,et al.  Psychophysical studies of repetitive wrist flexion and extension. , 1995, Ergonomics.

[2]  S. Skerfving,et al.  Musculoskeletal disorders among female dental personnel – clinical examination and a 5-year follow-up study of symptoms , 1999, International archives of occupational and environmental health.

[3]  J. Macdermid,et al.  Forearm pronation and supination: reliability of absolute torques and nondominant/dominant ratios. , 1994, Journal of hand therapy : official journal of the American Society of Hand Therapists.

[4]  W. Rymer,et al.  Strategies for muscle activation during isometric torque generation at the human elbow. , 1989, Journal of neurophysiology.

[5]  E. J. Carey,et al.  Wrist discomfort levels for combined movements at constant force and repetition rate , 2005, Ergonomics.

[6]  Dempster Wt MECHANISMS OF SHOULDER MOVEMENT. , 1965 .

[7]  E Melin,et al.  Neck-shoulder loading characteristics and work technique. , 1987, Ergonomics.

[8]  H. Christensen,et al.  Muscle activity and fatigue in the shoulder muscles of assembly-plant employees. , 1986, Scandinavian journal of work, environment & health.

[9]  Roger Haslam,et al.  Musculoskeletal disorders in a handmade brick manufacturing plant , 2001 .

[10]  E N Corlett,et al.  A technique for assessing postural discomfort. , 1976, Ergonomics.

[11]  A Kilbom,et al.  Work technique and its consequences for musculoskeletal disorders. , 1987, Ergonomics.

[12]  James A. Johnson,et al.  Electromyographic activity and strength during maximum isometric pronation and supination efforts in healthy adults , 2004, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[13]  R. Edwards Studies of muscular performance in normal and dystrophic subjects. , 1980, British medical bulletin.

[14]  S. Delp,et al.  Variation of muscle moment arms with elbow and forearm position. , 1995, Journal of biomechanics.

[15]  J. Macdermid,et al.  Forearm Pronation and Supination , 1994 .

[16]  Simple method to determine sincerity of effort during a maximal isometric test of grip strength. , 1983 .

[17]  J. Basmajian Muscles Alive—their functions revealed by electromyography , 1963 .

[18]  C. Snijders,et al.  Mechanical tension in the median nerve. The effects of joint positions. , 1995, Clinical biomechanics.

[19]  T. Fredericks,et al.  The effect of upper-extremity posture on maximum grip strength , 1996 .

[20]  Brian T Stollery,et al.  International Encyclopaedia of Ergonomics and Human Factors , 2006 .

[21]  John Annett,et al.  Subjective rating scales in ergonomics: a reply , 2002 .

[22]  P M Rozing,et al.  External rotation in the glenohumeral joint during elevation of the arm. , 2003, Clinical biomechanics.

[23]  G. Gescheider Psychophysics : method, theory, and application , 1985 .

[24]  Vern Putz-Anderson,et al.  Cumulative trauma disorders : a manual for musculoskeletal diseases of the upper limbs , 1988 .

[25]  A. Mital,et al.  Human muscle strength definitions, measurement, and usage: Part I – Guidelines for the practitioner , 1998 .

[26]  Jan Noyes,et al.  International encyclopaedia of ergonomics and human factors , 2006 .

[27]  P. McCoy Anatomy and Human Movement: Structure and function , 1989 .

[28]  H Broman,et al.  Arm positioning in manual tasks. An electromyographic study of localized muscle fatigue. , 1980, Ergonomics.

[29]  M Hagberg,et al.  Occupational and individual factors in acute shoulder-neck disorders among industrial workers. , 1981, British journal of industrial medicine.

[30]  Inseok Lee,et al.  Physiological workload evaluation of screw driving tasks in automobile assembly jobs , 2001 .

[31]  S. Kumar,et al.  Theories of musculoskeletal injury causation , 2001, Ergonomics.

[32]  D B Chaffin,et al.  Shoulder posture and localized muscle fatigue and discomfort. , 1989, Ergonomics.

[33]  LW O'Sullivan,et al.  Forearm torque strengths and discomfort profiles in pronation and supination , 2005, Ergonomics.

[34]  Elaine Ewing Fess,et al.  Clinical assessment Recommendations , 1981 .

[35]  W. Smutz,et al.  Roles of deltoid and rotator cuff muscles in shoulder elevation. , 1997, Clinical biomechanics.

[36]  Anil Mital,et al.  HUMAN MUSCLE STRENGTH DEFINITIONS, MEASUREMENT, AND USAGE : PART II - THE SCIENTIFIC BASIS (KNOWLEDGE BASE) FOR THE GUIDE , 1998 .

[37]  Colin G. Drury,et al.  Identifying Factors of Comfort and Discomfort in Sitting , 1996, Hum. Factors.

[38]  J. Mogk,et al.  The effects of posture on forearm muscle loading during gripping , 2003, Ergonomics.

[39]  Y Narayan,et al.  An electromyographic study of upper limb adduction force with varying shoulder and elbow postures. , 1998, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[40]  M. Hagberg,et al.  Prevalence rates and odds ratios of shoulder-neck diseases in different occupational groups. , 1987, British journal of industrial medicine.

[41]  R L Lieber,et al.  Clinical significance of skeletal muscle architecture. , 2001, Clinical orthopaedics and related research.

[42]  H. J. Coury,et al.  Measurements of shoulder adduction strength in different postures , 1998 .

[43]  N SALTER,et al.  The effect of the degree of elbow flexion on the maximum torques developed in pronation and supination of the right hand. , 1952, Journal of anatomy.

[44]  Timothy J. Gallwey,et al.  Effects of wrist posture, pace and exertion on discomfort , 2002 .

[45]  Vincent M Ciriello,et al.  Maximal acceptable torques of highly repetitive screw driving, ulnar deviation, and handgrip tasks for 7-hour workdays. , 2002, AIHA journal : a journal for the science of occupational and environmental health and safety.

[46]  J. Fridén,et al.  Sarcomere length varies with wrist ulnar deviation but not forearm pronation in the extensor carpi radialis brevis muscle. , 1999, Journal of biomechanics.