A microfluidic platform for generating large-scale nearly identical human microphysiological vascularized tissue arrays.

This paper reports a polydimethylsiloxane microfluidic model system that can develop an array of nearly identical human microtissues with interconnected vascular networks. The microfluidic system design is based on an analogy with an electric circuit, applying resistive circuit concepts to design pressure dividers in serially-connected microtissue chambers. A long microchannel (550, 620 and 775 mm) creates a resistive circuit with a large hydraulic resistance. Two media reservoirs with a large cross-sectional area and of different heights are connected to the entrance and exit of the long microchannel to serve as a pressure source, and create a near constant pressure drop along the long microchannel. Microtissue chambers (0.12 μl) serve as a two-terminal resistive component with an input impedance >50-fold larger than the long microchannel. Connecting each microtissue chamber to two different positions along the long microchannel creates a series of pressure dividers. Each microtissue chamber enables a controlled pressure drop of a segment of the microchannel without altering the hydrodynamic behaviour of the microchannel. The result is a controlled and predictable microphysiological environment within the microchamber. Interstitial flow, a mechanical cue for stimulating vasculogenesis, was verified by finite element simulation and experiments. The simplicity of this design enabled the development of multiple microtissue arrays (5, 12, and 30 microtissues) by co-culturing endothelial cells, stromal cells, and fibrin within the microchambers over two and three week periods. This methodology enables the culturing of a large array of microtissues with interconnected vascular networks for biological studies and applications such as drug development.

[1]  Fergal J O'Brien,et al.  Design and validation of a dynamic flow perfusion bioreactor for use with compliant tissue engineering scaffolds. , 2008, Journal of biotechnology.

[2]  Noo Li Jeon,et al.  Diffusion limits of an in vitro thick prevascularized tissue. , 2005, Tissue engineering.

[3]  David J Beebe,et al.  Flow rate analysis of a surface tension driven passive micropump. , 2007, Lab on a chip.

[4]  J. Kang,et al.  How the capillary burst microvalve works. , 2007, Journal of colloid and interface science.

[5]  Roger D Kamm,et al.  In vitro 3D collective sprouting angiogenesis under orchestrated ANG-1 and VEGF gradients. , 2011, Lab on a chip.

[6]  Steven C George,et al.  Rapid anastomosis of endothelial progenitor cell-derived vessels with host vasculature is promoted by a high density of cotransplanted fibroblasts. , 2010, Tissue engineering. Part A.

[7]  L. Griffith,et al.  Transport‐mediated angiogenesis in 3D epithelial coculture , 2009, FASEB journal : official publication of the Federation of American Societies for Experimental Biology.

[8]  K. Oh,et al.  3-Dimensional cell culture for on-chip differentiation of stem cells in embryoid body. , 2011, Lab on a chip.

[9]  W. Graham Richards,et al.  Art of electronics , 1983, Nature.

[10]  Tim Stakenborg,et al.  Review of microfluidic microbioreactor technology for high-throughput submerged microbiological cultivation. , 2013, Biomicrofluidics.

[11]  J. Vacanti,et al.  Endothelialized Networks with a Vascular Geometry in Microfabricated Poly(dimethyl siloxane) , 2004 .

[12]  L. Griffith,et al.  Capturing complex 3D tissue physiology in vitro , 2006, Nature Reviews Molecular Cell Biology.

[13]  R. Kamm,et al.  Cell migration into scaffolds under co-culture conditions in a microfluidic platform. , 2009, Lab on a chip.

[14]  G. Whitesides,et al.  Generation of Solution and Surface Gradients Using Microfluidic Systems , 2000 .

[15]  Jan Overney,et al.  A multichamber fluidic device for 3D cultures under interstitial flow with live imaging: Development, characterization, and applications , 2010, Biotechnology and bioengineering.

[16]  Luke P. Lee,et al.  Continuous perfusion microfluidic cell culture array for high-throughput cell-based assays. , 2005, Biotechnology and bioengineering.

[17]  Roger D. Kamm,et al.  Microfluidic Platforms for Studies of Angiogenesis, Cell Migration, and Cell–Cell Interactions , 2010, Annals of Biomedical Engineering.

[18]  Yu-Hsiang Hsu,et al.  In vitro perfused human capillary networks. , 2013, Tissue engineering. Part C, Methods.

[19]  Federica Boschetti,et al.  Synergy between interstitial flow and VEGF directs capillary morphogenesis in vitro through a gradient amplification mechanism. , 2005, Proceedings of the National Academy of Sciences of the United States of America.

[20]  Joe Tien,et al.  Formation of perfused, functional microvascular tubes in vitro. , 2006, Microvascular research.

[21]  K. Oh,et al.  Generalized serial dilution module for monotonic and arbitrary microfluidic gradient generators. , 2009, Lab on a chip.

[22]  Melody A Swartz,et al.  Interstitial flow differentially stimulates blood and lymphatic endothelial cell morphogenesis in vitro. , 2004, Microvascular research.

[23]  Yu-Hsiang Hsu,et al.  Full range physiological mass transport control in 3D tissue cultures. , 2013, Lab on a chip.

[24]  Kangsun Lee,et al.  Design of pressure-driven microfluidic networks using electric circuit analogy. , 2012, Lab on a chip.

[25]  Jeffrey T Borenstein,et al.  Microfabrication of three-dimensional engineered scaffolds. , 2007, Tissue engineering.

[26]  B. Dunn,et al.  Oxygen diffusion in poly(dimethyl siloxane) using fluorescence quenching. I. Measurement technique and analysis , 1986 .

[27]  N. Monteiro-Riviere,et al.  A linear dilution microfluidic device for cytotoxicity assays. , 2007, Lab on a chip.

[28]  George E. Davis,et al.  Endothelial tubes assemble from intracellular vacuoles in vivo , 2006, Nature.

[29]  Tharathorn Rimchala,et al.  Surface‐Treatment‐Induced Three‐Dimensional Capillary Morphogenesis in a Microfluidic Platform , 2009, Advanced materials.