Miniaturization and resolution improvement of load sensor using AT-cut quartz crystal resonator

A compact load sensor we developed uses an AT-cut quartz crystal resonator whose resonance frequency changes under external load, and features high sensitivity, high-speed response, and a wide measurement range. Also it has the superior feature in the temperature and frequency stability. In the past, the quartz crystal resonator had been hardly applied to the load measurement because of low degree of mechanical characteristic, that is, it is weak to stress concentration by bending. We have developed and characterized a sensor mechanism that safely maintains the quartz crystal resonator. The objective of this study is to improve the resolution of load measurement and to miniaturize the sensor. We designed a novel retention mechanism of the quartz crystal resonator which is fixed vertical to the applied load. The new load sensor was evaluated on the relation between load and resonance frequency as well as temperature and resonance frequency.

[1]  M. Gomes,et al.  Detection of volatile amines using a quartz crystal with gold electrodes , 1999 .

[2]  M. Shimomura,et al.  DNA sensing with a quartz crystal device for determination of microorganisms , 2007 .

[3]  Armando C. Duarte,et al.  Detection of CO2 using a qaurtz crystal microbalance , 1995 .

[4]  Desheng Jiang,et al.  Quartz crystal microbalance coated with carbon nanotube films used as humidity sensor , 2005 .

[5]  Brice Sorli,et al.  Quartz Crystal Microbalance (QCM) used as humidity sensor , 2000 .

[6]  J. Ratajski,et al.  Force-frequency coefficient of singly rotated vibrating quartz crystals , 1968 .

[7]  C. R. Tellier,et al.  Some investigations on doubly-rotated quartz resonant temperature sensors , 2002 .

[8]  Zheyao Wang,et al.  A thickness-shear quartz resonator force sensor with dual-mode temperature compensation , 2003 .

[9]  B. Dulmet,et al.  Frequency-output force sensor using a multimode doubly rotated quartz resonator , 1995 .

[10]  Shigenobu Muraoka,et al.  Characteristics of a Rectangular AT Cut Quartz Resonator as a Force Sensor , 1996 .

[11]  Fumihito Arai,et al.  Design, fabrication and characterization of compact force sensor using AT-cut quartz crystal resonators , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[12]  Xiao-Hong Wang,et al.  Self-temperature-testing of the quartz resonant force sensor , 1999, IEEE Trans. Instrum. Meas..

[13]  Fumihito Arai,et al.  Compact Force Sensor Using AT-Cut Quartz Crystal Resonator Supported by Novel Retention Mechanism , 2009, J. Robotics Mechatronics.

[14]  L. Spassov,et al.  Thermosensitive quartz resonators at cryogenic temperatures , 1997 .

[15]  Aparecido Augusto de Carvalho,et al.  A strain gauge tactile sensor for finger-mounted applications , 2002, IEEE Trans. Instrum. Meas..

[16]  E. Benes,et al.  Sensors based on piezoelectric resonators , 1995 .

[17]  E.P. EerNisse,et al.  Review of thickness-shear mode quartz resonator sensors for temperature and pressure , 2001, IEEE Sensors Journal.

[18]  Shigenobu Muraoka.  Force Sensor with Quartz Resonators by Differential Method , 1997 .

[19]  E.P. EerNisse,et al.  Quartz thickness-shear mode pressure sensor design for enhanced sensitivity , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.