Double-pulse LIBS in bulk water and on submerged bronze samples

In this work laser-induced breakdown spectroscopy (LIBS) has been applied in bulk water using a double-pulse laser source. As in the case of former experiments in air, the use of the double-pulse technique allows for enhancing line emission intensity and reducing the duration of the continuum spectrum, thus increasing the overall analytical performances of the technique. Tap water analysis of Na and Mg dissolved cations has been performed to investigate the capability of the technique, but most significant results have been obtained in determining the composition of submerged bronze targets by laser ablation of their surface in seawater. When the plasma is generated by double-pulse laser, the ablated matter is strongly confined by the water vapor inside the cavitations bubble. The confinement of the plasma leads to higher values of excitation temperature and holds the conditions suitable for chemical analysis (homogeneity and LTE) longer than what happens in gaseous media. The double-pulse experiments performed directly in bulk water point out the features of LIBS technique for real analytical applications in situ, such as the water quality assessment and the investigation of irremovable submerged objects.

[1]  R. Russo,et al.  Inductively coupled plasma mass spectrometric study of non-linear calibration behavior during laser ablation of binary Cu-Zn alloys , 1999 .

[2]  V. Lazic,et al.  A comparison of single and double pulse laser-induced breakdown spectroscopy of aluminum samples , 2002 .

[3]  M. Villagrán-Muniz,et al.  Temporal evolution of the shock wave and hot core air in laser induced plasma , 2000 .

[4]  Jagdish P. Singh,et al.  Double-pulse laser-induced breakdown spectroscopy with liquid jets of different thicknesses. , 2003, Applied optics.

[5]  Valeria Spizzichino,et al.  LIBS as a diagnostic tool during the laser cleaning of copper based alloys: experimental results , 2004 .

[6]  V. Lazic,et al.  Self-absorption model in quantitative laser induced breakdown spectroscopy measurements on soils and sediments , 2001 .

[7]  Paolo Cielo,et al.  Analysis of solids using laser-induced plasma spectroscopy in double-pulse mode , 1998 .

[8]  M. Sabsabi,et al.  Quantitative analysis of additives in solid zinc alloys by laser-induced plasma spectrometry , 1997 .

[9]  W. Neu,et al.  Double-pulse technique for optical emission spectroscopy of ablation plasmas of samples in liquids. , 1993, Optics letters.

[10]  F. Colao,et al.  Double pulse laser produced plasma on metallic target in seawater: basic aspects and analytical approach , 2004 .

[11]  D. Hammer,et al.  Laser-induced breakdown in aqueous media , 1997 .

[12]  S. Angel,et al.  Dual-Pulse LIBS Using a Pre-Ablation Spark for Enhanced Ablation and Emission , 2000 .

[13]  M. Harith,et al.  Panoramic laser-induced breakdown spectrometry of water , 2002 .

[14]  S. Michael Angel,et al.  Enhancement of Aluminum, Titanium, and Iron in Glass Using Pre-Ablation Spark Dual-Pulse LIBS , 2000 .

[15]  A. E. Pichahchy,et al.  Elemental analysis of metals under water using laser-induced breakdown spectroscopy , 1997 .

[16]  M. Dell’Aglio,et al.  Single Pulse-Laser Induced Breakdown Spectroscopy in aqueous solution , 2004 .

[17]  J. Yun,et al.  Determination of size, concentration and elemental composition of colloids with laser-induced breakdown detection/spectroscopy (LIBD/S) , 2001, Fresenius' journal of analytical chemistry.