Enhanced performance of solution-processed solar cells based on porphyrin small molecules with a diketopyrrolopyrrole acceptor unit and a pyridine additive

A conjugated donor–acceptor porphyrin small molecule was designed and synthesized with diketopyrrolopyrrole as the acceptor unit. The new porphyrin-based small molecule exhibits broad and intense absorption in the visible and near IR regions, and the hole mobility and the power conversion efficiency of the bulk heterojunction devices based on the porphyrin : [6,6]-phenyl-C-61-butyric acid methyl ester (1 : 1, w/w) are increased up to 4.6 × 10−5 cm2 V−1 s−1 and 3.71%, respectively, which are further enhanced to 1.6 × 10−4 cm2 V−1 s−1 and 4.78%, respectively, upon the introduction of 3.0 vol% of pyridine additive. Further studies show that the performance of the solar cells based on other zinc porphyrins could also be improved by the pyridine additive.

[1]  Yong‐Young Noh,et al.  A conjugated polyazine containing diketopyrrolopyrrole for ambipolar organic thin film transistors. , 2012, Chemical communications.

[2]  Yongfang Li,et al.  Conjugated Polymer Photovoltaic Materials with Broad Absorption Band and High Charge Carrier Mobility , 2008 .

[3]  Yang Yang,et al.  Systematic investigation of benzodithiophene- and diketopyrrolopyrrole-based low-bandgap polymers designed for single junction and tandem polymer solar cells. , 2012, Journal of the American Chemical Society.

[4]  Tae‐Woo Lee,et al.  High-efficiency polymer photovoltaic cells using a solution-processable insulating interfacial nanolayer: the role of the insulating nanolayer , 2012 .

[5]  Niyazi Serdar Sariciftci,et al.  Morphology of polymer/fullerene bulk heterojunction solar cells , 2006 .

[6]  Thuc‐Quyen Nguyen,et al.  Non‐Basic High‐Performance Molecules for Solution‐Processed Organic Solar Cells , 2012, Advanced materials.

[7]  Jin Young Kim,et al.  Processing additives for improved efficiency from bulk heterojunction solar cells. , 2008, Journal of the American Chemical Society.

[8]  Jian Pei,et al.  High-performance air-stable organic field-effect transistors: isoindigo-based conjugated polymers. , 2011, Journal of the American Chemical Society.

[9]  Yongfang Li.  Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. , 2012, Accounts of chemical research.

[10]  Yang Yang,et al.  Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole. , 2008, Journal of the American Chemical Society.

[11]  W. Marsden.  I and J , 2012 .

[12]  Weiwei Li,et al.  Enhancing the photocurrent in diketopyrrolopyrrole-based polymer solar cells via energy level control. , 2012, Journal of the American Chemical Society.

[13]  Wei Lin Leong,et al.  Solution-processed small-molecule solar cells with 6.7% efficiency. , 2011, Nature materials.

[14]  Hiroyuki Miyauchi,et al.  A naphthodithiophene-diketopyrrolopyrrole donor molecule for efficient solution-processed solar cells. , 2011, Journal of the American Chemical Society.

[15]  Thuc‐Quyen Nguyen,et al.  Design, Synthesis, and Self-assembly of Oligothiophene Derivatives with a Diketopyrrolopyrrole Core , 2008 .

[16]  Guoqiang Ren,et al.  Solar cells based on block copolymer semiconductor nanowires: effects of nanowire aspect ratio. , 2011, ACS nano.

[17]  Michael Niggemann,et al.  Efficiency limiting morphological factors of MDMO-PPV:PCBM plastic solar cells , 2006 .

[18]  Fang‐Chung Chen,et al.  Solvent mixtures for improving device efficiency of polymer photovoltaic devices , 2008 .

[19]  U. Giovanella,et al.  Thermal characterization and annealing effects of polythiophene/fullerene photoactive layers for solar cells , 2006 .

[20]  D. D. de Leeuw,et al.  Poly(diketopyrrolopyrrole-terthiophene) for ambipolar logic and photovoltaics. , 2009, Journal of the American Chemical Society.

[21]  K. Hashimoto,et al.  Conjugated Polymers Based on 1,3-Dithien-2-yl-thieno[3,4-c]pyrrole-4,6-dione: Synthesis, Characterization, and Solvent Effects on Photovoltaic Performance , 2012 .

[22]  Junbiao Peng,et al.  Solution processed small molecule bulk heterojunction organic photovoltaics based on a conjugated donor–acceptor porphyrin , 2012 .

[23]  Wei You,et al.  A weak donor-strong acceptor strategy to design ideal polymers for organic solar cells. , 2010, ACS applied materials & interfaces.

[24]  Yongsheng Chen,et al.  A Planar Small Molecule with Dithienosilole Core for High Efficiency Solution-Processed Organic Photovoltaic Cells , 2011 .

[25]  Pierre M Beaujuge,et al.  Synthetic control of structural order in N-alkylthieno[3,4-c]pyrrole-4,6-dione-based polymers for efficient solar cells. , 2010, Journal of the American Chemical Society.

[26]  J. Moon,et al.  High-Detectivity Polymer Photodetectors with Spectral Response from 300 nm to 1450 nm , 2009, Science.

[27]  Mats Andersson,et al.  Influence of Solvent Mixing on the Morphology and Performance of Solar Cells Based on Polyfluorene Copolymer/Fullerene Blends , 2006 .

[28]  S. Forrest,et al.  Use of additives in porphyrin-tape/C60 near-infrared photodetectors , 2011 .

[29]  Junbiao Peng,et al.  Enhancing the performance of a thieno[3-4-b]pyrazine based polymer solar cell by introducing ethynylene linkages , 2012 .

[30]  Ye Tao,et al.  Effect of mixed solvents on PCDTBT:PC70BM based solar cells , 2011 .

[31]  Claire H. Woo,et al.  Efficient Small Molecule Bulk Heterojunction Solar Cells with High Fill Factors via Pyrene‐Directed Molecular Self‐Assembly , 2011, Advanced materials.

[32]  Yong Cao,et al.  Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells , 2011, Advanced materials.

[33]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[34]  P. Sonar,et al.  Furan substituted diketopyrrolopyrrole and thienylenevinylene based low band gap copolymer for high mobility organic thin film transistors , 2012 .

[35]  U. Jeng,et al.  Improving Device Efficiency of Polymer/Fullerene Bulk Heterojunction Solar Cells Through Enhanced Crystallinity and Reduced Grain Boundaries Induced by Solvent Additives , 2011, Advanced materials.

[36]  J. Fréchet,et al.  Molecular design and ordering effects in π-functional materials for transistor and solar cell applications. , 2011, Journal of the American Chemical Society.

[37]  Samson A. Jenekhe,et al.  Non‐Fullerene Acceptor‐Based Bulk Heterojunction Polymer Solar Cells: Engineering the Nanomorphology via Processing Additives , 2011 .

[38]  W. Li,et al.  Donor-acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high-performance polymer solar cells. , 2011, Journal of the American Chemical Society.

[39]  O. Inganäs,et al.  An Easily Synthesized Blue Polymer for High‐Performance Polymer Solar Cells , 2010, Advanced materials.

[40]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[41]  O. Park,et al.  Roles of interlayers in efficient organic photovoltaic devices. , 2010, Macromolecular rapid communications.

[42]  Yongye Liang,et al.  Ultrafast intramolecular exciton splitting dynamics in isolated low-band-gap polymers and their implications in photovoltaic materials design. , 2012, Journal of the American Chemical Society.

[43]  Ye Tao,et al.  Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2',3'-d]silole copolymer with a power conversion efficiency of 7.3%. , 2011, Journal of the American Chemical Society.

[44]  Claire H. Woo,et al.  Incorporation of furan into low band-gap polymers for efficient solar cells. , 2010, Journal of the American Chemical Society.

[45]  P. Blom,et al.  Electric-field and temperature dependence of the hole mobility in poly(p-phenylene vinylene) , 1997 .

[46]  Thuc‐Quyen Nguyen,et al.  A Low Band Gap, Solution Processable Oligothiophene with a Diketopyrrolopyrrole Core for Use in Organic Solar Cells , 2008 .

[47]  M. Toney,et al.  Side-chain tunability of furan-containing low-band-gap polymers provides control of structural order in efficient solar cells. , 2012, Journal of the American Chemical Society.

[48]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.