论文信息 - Some discussions of the resonator structure for the cut-off waveguide method and the round robin test

Some discussions of the resonator structure for the cut-off waveguide method and the round robin test

A novel structure of a circular cylindrical resonator for the cut-off waveguide method are proposed to suppress unwanted TE modes in the axial direction and TM modes in the radial direction, respectively. Moreover, the round robin test is performed by using seven copper cavities and three low loss dielectric plates. It is verified numerically and experimentally that the novel structure of the resonator is useful to suppress the unwanted resonance modes. Moreover, it is found that the measurement accuracies of this method are estimated within 1 percent for ¿r and within 15 percents for tan¿.

Yoshio Kobayashi | Takashi Shimizu | T. Nishino

[1] Yoshio Kobayashi,et al. Millimeter wave measurements of some low-loss dielectric plates by a novel cut-off circular waveguide method , 2002, 2002 32nd European Microwave Conference.

[2] T. Shimizu,et al. Millimeter wave measurements of temperature dependence of complex permittivity of GaAs plates by a circular waveguide method , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[3] G. Kent. An evanescent-mode tester for ceramic dielectric substrates , 1988 .

[4] Alexander Lamb Cullen,et al. The accurate measurement of permittivity by means of an open resonator , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[5] Y. Kogami. Measurements of complex permittivities in 100 GHz band by the Whispering-gallery mode resonator method , 2001 .

[6] Yoshio Kobayashi,et al. GHz measurements of temperature dependence of complex permittivity of dielectric plates by a cut-off circular waveguide method , 2001 .