Proceedings of the 2nd International Congress on 3D Materials Science

[1]  J. Franke,et al.  On a Mixture Model for Directional Data on the Sphere , 2016 .

[2]  S. D. Yadav,et al.  Characterisation and quantification of cavities in 9Cr martensitic steel for power plants , 2015 .

[3]  Katja Schladitz,et al.  Characterization of multilayer structures in fiber reinforced polymer employing synchrotron and laboratory X-ray CT , 2014 .

[4]  K. Mingard,et al.  Investigation of slice thickness and shape milled by a focused ion beam for three-dimensional reconstruction of microstructures. , 2014, Ultramicroscopy.

[5]  L. Nastac.  A 3D stochastic mesoscopic model for prediction of microstructure evolution during solidification of dendritic alloys , 2014 .

[6]  Eric Charkaluk,et al.  Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy , 2014 .

[7]  M. Groeber,et al.  Experimental measurement of surface strains and local lattice rotations combined with 3D microstructure reconstruction from deformed polycrystalline ensembles at the micro-scale , 2013, Integrating Materials and Manufacturing Innovation.

[8]  Lori Bassman,et al.  Boundary identification in EBSD data with a generalization of fast multiscale clustering. , 2013, Ultramicroscopy.

[9]  A. Takeuchi,et al.  Grain boundary tracking: A four-dimensional visualization technique for determining grain boundary geometry via local strain mapping , 2013 .

[10]  Ingo Steinbach,et al.  Phase-Field Model for Microstructure Evolution at the Mesoscopic Scale , 2013 .

[11]  Y. Qin,et al.  Simulation and Experimental Mechanical Properties of SiCn/2024 Al Alloy Co-Continuous Composites , 2013 .

[12]  H. Ru,et al.  Numerical Simulations of Compression Properties of SiC/Fe-20Cr Co-Continuous Composites , 2013 .

[13]  M. Fu,et al.  HRTEM and HAADF-STEM tomography investigation of the heterogeneously formed S (Al2CuMg) precipitates in Al–Cu–Mg alloy , 2013 .

[14]  C. Redenbach,et al.  STATISTICAL ANALYSIS OF THE LOCAL STRUT THICKNESS OF OPEN CELL FOAMS , 2013 .

[15]  Dominique Houzet,et al.  Investigating performance variations of an optimized GPU-ported granulometry algorithm , 2012, Proceedings of the 2012 Conference on Design and Architectures for Signal and Image Processing.

[16]  Liang Yu,et al.  Thermal analysis for brake disks of SiC/6061 Al alloy co-continuous composite for CRH3 during emergency braking considering airflow cooling , 2012 .

[17]  Frank W. Zok,et al.  Deformation stabilization of lattice structures via foam addition , 2012 .

[18]  T. A. Mason,et al.  Deformation twinning in explosively-driven tantalum , 2012 .

[19]  A. Takeuchi,et al.  Diffraction-Amalgamated Grain-boundary Tracking (DAGT) technique and its application to an aluminum alloy , 2012 .

[20]  Katja Schladitz,et al.  Beyond imaging: on the quantitative analysis of tomographic volume data , 2012 .

[21]  Peng Gui-hua.  New Progress of Co-continuous Ceramic Composites , 2012 .

[22]  E. Kozeschnik,et al.  Particle strengthening in fcc crystals with prolate and oblate precipitates , 2012 .

[23]  Lori Bassman,et al.  Subgrain Boundary Identification in 3D EBSD Data through Fast Multiscale Clustering , 2012 .

[24]  Dietmar Meinel,et al.  Automated 3D Crack Detection for Analyzing Damage Processes in Concrete with Computed Tomography , 2012 .

[25]  Akinori Yamanaka,et al.  Multiphase Field Simulation of Austenite-to-Ferrite Transformation Accelerated by GPU Computing , 2012 .

[26]  D. Cree,et al.  Dry wear and friction properties of an A356/SiC foam interpenetrating phase composite , 2011 .

[27]  H. Ru,et al.  FEM for Brake Discs of SiC 3D Continuous Ceramic Reinforced 7075 Aluminum Alloy for CRH3 Trains Applying Emergency Braking , 2011 .

[28]  H. Ru,et al.  Numerical Simulation of Brake Discs of CRH3 High‐Speed Trains Based on Ansys , 2011 .

[29]  Stéphane Roux,et al.  Digital volume correlation analyses of synchrotron tomographic images , 2011 .

[30]  Johann Kastner,et al.  Evaluation of Computed Tomography Data from Fibre Reinforced Polymers to Determine Fibre Length Distribution , 2011 .

[31]  Ricardo A. Lebensohn,et al.  Effects of grain size and boundary structure on the dynamic tensile response of copper , 2011 .

[32]  Tetyana Sych,et al.  3D IMAGE ANALYSIS OF OPEN FOAMS USING RANDOM TESSELLATIONS , 2011 .

[33]  Dominique Jeulin,et al.  3D DIRECTIONAL MATHEMATICAL MORPHOLOGY FOR ANALYSIS OF FIBER ORIENTATIONS , 2011 .

[34]  M. Boyce,et al.  Co‐Continuous Composite Materials for Stiffness, Strength, and Energy Dissipation , 2011, Advanced materials.

[35]  Ming Han,et al.  Variant selection and the strengthening effect of S precipitates at dislocations in Al–Cu–Mg alloy , 2011 .

[36]  Eric Maire,et al.  In situ observation of ductile fracture using X-ray tomography technique , 2011 .

[37]  Lori Bassman,et al.  The three-dimensional nature of microbands in a channel die compressed Goss-oriented Ni single crystal , 2011 .

[38]  C. Redenbach,et al.  Statistical analysis and stochastic modelling of fibre composites , 2011 .

[39]  Yan-qing Yang,et al.  Precipitation process along dislocations in Al-Cu-Mg alloy during artificial aging , 2010 .

[40]  Na Li,et al.  Numerical Simulations of Compression Properties of SiC/Al Co-continuous Composites , 2010, CCTA.

[41]  Munekazu Ohno,et al.  Quantitative phase-field modeling for two-phase solidification process involving diffusion in the solid , 2010 .

[42]  S. J. Milne,et al.  Characterization of dentine structure in three dimensions using FIB‐SEM , 2010, Journal of microscopy.

[43]  Marco Stampanoni,et al.  Fast reconstruction algorithm dealing with tomography artifacts , 2010, Optical Engineering + Applications.

[44]  Jing Zhao,et al.  Microstructure and Properties of Graphite Embedded SiC Composite by Coating Method , 2010 .

[45]  Shengguan Qu,et al.  Two-body abrasive behavior of brake pad dry sliding against interpenetrating network ceramics/Al-alloy composites , 2010 .

[46]  B. Burgeth,et al.  Determination of the fibre orientation in composites using the structure tensor and local X-ray transform , 2010 .

[47]  H. Schaeben,et al.  Texture Analysis with MTEX – Free and Open Source Software Toolbox , 2010 .

[48]  E. Maire,et al.  In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics , 2010 .

[49]  Jacques Besson,et al.  Study of the microstructure of the Grade 91 steel after more than 100,000 h of creep exposure at 600 °C , 2010 .

[50]  Kesheng Wu,et al.  Fast connected-component labeling , 2009, Pattern Recognit..

[51]  M. Ferry,et al.  A High-Resolution Three-Dimensional Electron Backscatter Diffraction Study of the Nucleation of Recrystallization in Cold-Rolled Extra-Low-Carbon Steel , 2009 .

[52]  R. Ferragut,et al.  Microstructural characterisation of a commercial Al–Cu–Mg alloy combining transmission electron microscopy and positron annihilation spectroscopy , 2009 .

[53]  H. Inoue,et al.  Estimation of Planar Anisotropy of the r-Value in Ferritic Stainless Steel Sheets , 2009 .

[54]  Claudia Redenbach,et al.  Microstructure models for cellular materials , 2009 .

[55]  H. Tippur,et al.  Processing, compression response and finite element modeling of syntactic foam based interpenetrating phase composite (IPC) , 2009 .

[56]  K. Uesugi,et al.  Direct measurement procedure for three-dimensional local crack driving force using synchrotron X-ray microtomography , 2008 .

[57]  Kentaro Uesugi,et al.  High-density three-dimensional mapping of internal strain by tracking microstructural features , 2008 .

[58]  Hidehiro Onodera,et al.  Parallel Computer Simulation of Three-Dimensional Grain Growth Using the Multi-Phase-Field Model , 2008 .

[59]  X. Cao,et al.  Thermal expansion of a novel hybrid SiC foam–SiC particles–Al composites , 2007 .

[60]  Maria Axelsson.  3D Tracking of Cellulose Fibres in Volume Images , 2007, 2007 IEEE International Conference on Image Processing.

[61]  E. Cerreta,et al.  Modeling the microstructural evolution of metallic polycrystalline materials under localization conditions , 2007 .

[62]  Zhengdong Wang,et al.  A review of creep analysis and design under multi-axial stress states , 2007 .

[63]  Carlos Oscar Sánchez Sorzano,et al.  TomoJ: tomography software for three-dimensional reconstruction in transmission electron microscopy , 2007, BMC Bioinformatics.

[64]  R. Sandström,et al.  Creep Strain Modeling of 9 to 12 Pct Cr Steels Based on Microstructure Evolution , 2007 .

[65]  E. Maire,et al.  Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography , 2007 .

[66]  Won Tae Kim,et al.  Computer simulations of two-dimensional and three-dimensional ideal grain growth. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[67]  K. Uesugi,et al.  Preferential penetration path of gallium into grain boundary in practical aluminium alloy , 2006 .

[68]  Achi Brandt,et al.  Fast multiscale clustering and manifold identification , 2006, Pattern Recognit..

[69]  Ronen Basri,et al.  Hierarchy and adaptivity in segmenting visual scenes , 2006, Nature.

[70]  T. A. Mason,et al.  An experimental and numerical study of the localization behavior of tantalum and stainless steel , 2006 .

[71]  John Hald,et al.  Behaviour of Z phase in 9–12%Cr steels , 2006 .

[72]  J. Asay,et al.  Spall behavior of aluminum with varying microstructures , 2006 .

[73]  Monte Carlo Potts Model Simulation and Statistical Mean-Field Theory of Normal Grain Growth , 2006 .

[74]  M. Starink,et al.  Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys , 2005 .

[75]  Per Christian Henden,et al.  Individual fiber segmentation of three-dimensional microtomograms of paper and fiber-reinforced composite materials , 2005 .

[76]  A. Schwartz,et al.  Effect of microstructural length scales on spall behavior of copper , 2004 .

[77]  Adam Morawiec,et al.  Distribution of grain boundaries in magnesia as a function of five macroscopic parameters , 2004 .

[78]  Ian Sinclair,et al.  A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomography , 2004 .

[79]  M. E. Kassner,et al.  Creep cavitation in metals , 2003 .

[80]  David L. McDowell,et al.  Measurement of deformation fields in polycrystalline OFHC copper , 2003 .

[81]  X. Cao,et al.  The nucleation of Fe-Rich phases on oxide films in Al-11.5Si-0.4Mg cast alloys , 2003 .

[82]  C. Sun,et al.  Thermal residual stresses in co-continuous composites , 2003 .

[83]  Calvin R. Maurer,et al.  A Linear Time Algorithm for Computing Exact Euclidean Distance Transforms of Binary Images in Arbitrary Dimensions , 2003, IEEE Trans. Pattern Anal. Mach. Intell..

[84]  Nicholas Ayache,et al.  Iconic feature based nonrigid registration: the PASHA algorithm , 2003, Comput. Vis. Image Underst..

[85]  H. G. Fjaer,et al.  Modeling of Casting, Welding and Advanced Solidification Processes IX , 2003 .

[86]  Gilles Celeux,et al.  EM procedures using mean field-like approximations for Markov model-based image segmentation , 2003, Pattern Recognit..

[87]  N. Bourne,et al.  Effects of orientation on the strength of the aluminum alloy 7010-T6 during shock loading: Experiment and simulation , 2002 .

[88]  M. Aronsson.  On 3D fibre measurements of digitized paper , 2002 .

[89]  J. Lundén.  Image Analysis Methods for Evaluation of Fibre Dimensions in Paper Cross-Sections , 2002 .

[90]  E. Lauridsen,et al.  A three-dimensional X-ray diffraction microscope for deformation studies of polycrystals , 2001 .

[91]  E. Maire,et al.  Experimental study of porosity and its relation to fatigue mechanisms of model Al–Si7–Mg0.3 cast Al alloys , 2001 .

[92]  D. Apelian,et al.  Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects , 2001 .

[93]  Angus J. Wilkinson,et al.  A crystallographic mechanism for fatigue crack propagation through grain boundaries , 2000 .

[94]  Shri Ramaswamy,et al.  Characterization of the three-dimensional structure of paper using x-ray microtomography , 2000 .

[95]  Lei Wang,et al.  MRF parameter estimation by MCMC method , 2000, Pattern Recognit..

[96]  Gerbrand Ceder,et al.  Evaluation of interfacial excess contributions in different phase-field models for elastically inhomogeneous systems , 2013 .

[97]  Ingo Steinbach,et al.  A generalized field method for multiphase transformations using interface fields , 1999 .

[98]  Catherine A. Sugar,et al.  Empirically defined health states for depression from the SF-12. , 1998, Health services research.

[99]  P. Anderson,et al.  Void nucleation and cracking at grain boundaries , 1998 .

[100]  B. Verlinden,et al.  Precipitation hardening of an Al-4.2 wt% Mg-0.6 wt% Cu alloy , 1998 .

[101]  Max A. Viergever,et al.  Efficient and reliable schemes for nonlinear diffusion filtering , 1998, IEEE Trans. Image Process..

[102]  R. Allem.  Characterization of paper coatings by scanning electron microscopy and image analysis , 1998 .

[103]  Jerry L. Prince,et al.  Gradient vector flow: a new external force for snakes , 1997, Proceedings of IEEE Computer Society Conference on Computer Vision and Pattern Recognition.

[104]  Long-Qing Chen,et al.  COMPUTER SIMULATION OF GRAIN GROWTH USING A CONTINUUM FIELD MODEL , 1997 .

[105]  I. Steinbach,et al.  A phase field concept for multiphase systems , 1996 .

[106]  J R Kremer,et al.  Computer visualization of three-dimensional image data using IMOD. , 1996, Journal of structural biology.

[107]  Rolf Adams,et al.  Seeded Region Growing , 1994, IEEE Trans. Pattern Anal. Mach. Intell..

[108]  Suresh G. Advani,et al.  The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites , 1987 .

[109]  A. Ardell,et al.  Precipitation hardening , 1985 .

[110]  Donald Geman,et al.  Stochastic Relaxation, Gibbs Distributions, and the Bayesian Restoration of Images , 1984, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[111]  L. Feldkamp,et al.  Practical cone-beam algorithm , 1984 .

[112]  M. V. Speight,et al.  Creep cavitation by vacancy diffusion in plastically deforming solid , 1978 .

[113]  J. Besag.  Spatial Interaction and the Statistical Analysis of Lattice Systems , 1974 .

[114]  Ray A. Jarvis,et al.  On the Identification of the Convex Hull of a Finite Set of Points in the Plane , 1973, Inf. Process. Lett..

[115]  Rudolf Zeller,et al.  Elastic Constants of Polycrystals , 1973 .

[116]  G. Herman,et al.  Algebraic reconstruction techniques (ART) for three-dimensional electron microscopy and x-ray photography. , 1970, Journal of theoretical biology.

[117]  J. MacQueen.  Some methods for classification and analysis of multivariate observations , 1967 .

[118]  R. N. Wilson,et al.  The nucleation and growth of S' precipitates in an aluminium - 2.5% copper - 1.2% magnesium alloy , 1965 .

[119]  D. Hull,et al.  The growth of grain-boundary voids under stress , 1959 .