The influence of plaque composition on underlying arterial wall stress during stent expansion: the case for lesion-specific stents.

Intracoronary stent implantation is a mechanical procedure, the success of which depends to a large degree on the mechanical properties of each vessel component involved and the pressure applied to the balloon. Little is known about the influence of plaque composition on arterial overstretching and the subsequent injury to the vessel wall following stenting. An idealised finite element model was developed to investigate the influence of both plaque types (hypercellular, hypocellular and calcified) and stent inflation pressures (9, 12 and 15 atm) on vessel and plaque stresses during the implantation of a balloon expandable coronary stent into an idealised stenosed artery. The plaque type was found to have a significant influence on the stresses induced within the artery during stenting. Higher stresses were predicted in the artery wall for cellular plaques, while the stiffer calcified plaque appeared to play a protective role by reducing the levels of stress within the arterial tissue for a given inflation pressure. Higher pressures can be applied to calcified plaques with a lower risk of arterial vascular injury which may reduce the stimulus for in-stent restenosis. Results also suggest that the risk of plaque rupture, and any subsequent thrombosis due to platelet deposition at the fissure, is greater for calcified plaques with low fracture stresses.

[1]  P. Prendergast,et al.  Cardiovascular stent design and vessel stresses: a finite element analysis. , 2005, Journal of biomechanics.

[2]  Pascal Verdonck,et al.  Realistic finite element-based stent design: the impact of balloon folding. , 2008, Journal of biomechanics.

[3]  Gerhard A. Holzapfel,et al.  Modeling Plaque Fissuring and Dissection during Balloon Angioplasty Intervention , 2007, Annals of Biomedical Engineering.

[4]  Weiqiang Wang,et al.  Analysis of the transient expansion behavior and design optimization of coronary stents by finite element method. , 2006, Journal of biomechanics.

[5]  E. Tuzcu,et al.  Coronary Plaque Classification With Intravascular Ultrasound Radiofrequency Data Analysis , 2002, Circulation.

[6]  L. Gibson,et al.  Static circumferential tangential modulus of human atherosclerotic tissue. , 1994, Journal of biomechanics.

[7]  P J Prendergast,et al.  Analysis of prolapse in cardiovascular stents: a constitutive equation for vascular tissue and finite-element modelling. , 2003, Journal of biomechanical engineering.

[8]  R M Henkelman,et al.  High‐resolution MR imaging of human arteries , 1995, Journal of magnetic resonance imaging : JMRI.

[9]  B. Wennerblom,et al.  Angiography-Guided Routine Coronary Stent Implantation Results in Suboptimal Dilatation , 2002, Angiology.

[10]  Aad van der Lugt,et al.  In vitro characterization of atherosclerotic carotid plaque with multidetector computed tomography and histopathological correlation , 2005, European Radiology.

[11]  G. Holzapfel,et al.  Anisotropic mechanical properties of tissue components in human atherosclerotic plaques. , 2004, Journal of biomechanical engineering.

[12]  A. Rovick,et al.  Influence of vascular smooth muscle on contractile mechanics and elasticity of arteries. , 1969, The American journal of physiology.

[13]  J. Humphrey,et al.  Compressive stress-relaxation of human atherosclerotic plaque. , 2001, Journal of biomedical materials research.

[14]  Martin J Graves,et al.  Stress analysis of carotid plaque rupture based on in vivo high resolution MRI. , 2006, Journal of biomechanics.

[15]  Krishnan B Chandran,et al.  Regional material property alterations in porcine femoral arteries with atheroma development. , 2005, Journal of biomechanics.

[16]  K. Hayashi.  Cardiovascular solid mechanics. Cells, tissues, and organs , 2003 .

[17]  P. J. Prendergast,et al.  Elastic Behavior of Porcine Coronary Artery Tissue Under Uniaxial and Equibiaxial Tension , 2004, Annals of Biomedical Engineering.

[18]  A. Grodzinsky,et al.  Structure‐Dependent Dynamic Mechanical Behavior of Fibrous Caps From Human Atherosclerotic Plaques , 1991, Circulation.

[19]  D. Liang,et al.  Finite element analysis of the implantation of a balloon-expandable stent in a stenosed artery. , 2005, International journal of cardiology.

[20]  F J Schoen,et al.  Computational structural analysis based on intravascular ultrasound imaging before in vitro angioplasty: prediction of plaque fracture locations. , 1993, Journal of the American College of Cardiology.

[21]  D. Toner,et al.  An investigation into the effect of stent strut thickness on restenosis using the finite element method and validation using an in-vitro compliant artery model , 2006 .

[22]  R N Vaishnav,et al.  Compressibility of the Arterial Wall , 1968, Circulation research.

[23]  Antonio Colombo,et al.  Selection of coronary stents. , 2002, Journal of the American College of Cardiology.

[24]  Gerhard A. Holzapfel,et al.  A Numerical Model to Study the Interaction of Vascular Stents with Human Atherosclerotic Lesions , 2007, Annals of Biomedical Engineering.

[25]  Gerhard A Holzapfel,et al.  Changes in the mechanical environment of stenotic arteries during interaction with stents: computational assessment of parametric stent designs. , 2005, Journal of biomechanical engineering.

[26]  E. Boerwinkle,et al.  From vulnerable plaque to vulnerable patient: a call for new definitions and risk assessment strategies: Part I. , 2003, Circulation.

[27]  V. Fuster,et al.  Magnetic resonance images lipid, fibrous, calcified, hemorrhagic, and thrombotic components of human atherosclerosis in vivo. , 1996, Circulation.

[28]  Jacques Ohayon,et al.  In-vivo prediction of human coronary plaque rupture location using intravascular ultrasound and the finite element method , 2001, Coronary artery disease.

[29]  Gerhard Sommer,et al.  Determination of layer-specific mechanical properties of human coronary arteries with nonatherosclerotic intimal thickening and related constitutive modeling. , 2005, American journal of physiology. Heart and circulatory physiology.

[30]  J. Humphrey,et al.  Composition- and history-dependent radial compressive behavior of human atherosclerotic plaque. , 1997, Journal of biomedical materials research.

[31]  A. Kastrati,et al.  Intracoronary stenting and angiographic results: strut thickness effect on restenosis outcome (ISAR-STEREO-2) trial. , 2003, Journal of the American College of Cardiology.

[32]  Walter Maurel,et al.  Biomechanical Models for Soft Tissue Simulation , 2003, Esprit Basic Research Series.

[33]  J. Gunn,et al.  The influence of physical stent parameters upon restenosis. , 2004, Pathologie-biologie.

[34]  A. Kastrati,et al.  Intracoronary Stenting and Angiographic Results: Strut Thickness Effect on Restenosis Outcome (ISAR-STEREO) Trial , 2001, Circulation.