Spatial Atomic Layer Deposition of Aluminum Oxide as a Passivating Hole Contact for Silicon Solar Cells
暂无分享,去创建一个
J. John | E. Cornagliotti | K. Davis | W. Schoenfeld | M. Haslinger | G. Gregory | Kortan Öğütman | N. Iqbal | Mengjie Li
[1] P. Banerjee,et al. Improving the Passivation of Molybdenum Oxide Hole‐Selective Contacts with 1 nm Hydrogenated Aluminum Oxide Films for Silicon Solar Cells , 2020, physica status solidi (a).
[2] Benjamin E. Davis,et al. Aluminum Oxide Passivating Tunneling Interlayers for Molybdenum Oxide Hole-Selective Contacts , 2020, IEEE Journal of Photovoltaics.
[3] Z. Holman,et al. Passivation, conductivity, and selectivity in solar cell contacts: Concepts and simulations based on a unified partial-resistances framework , 2019, Journal of Applied Physics.
[4] Thomas G. Allen,et al. Passivating contacts for crystalline silicon solar cells , 2019, Nature Energy.
[5] Kwan Bum Choi,et al. Ultra-thin atomic layer deposited aluminium oxide tunnel layer passivated hole-selective contacts for silicon solar cells , 2019, Solar Energy Materials and Solar Cells.
[6] Surface Passivation of Industrial Crystalline Silicon Solar Cells , 2018 .
[7] N. Strandwitz,et al. Absence of Evidence for Fixed Charge in Metal–Aluminum Oxide–Silicon Tunnel Diodes , 2018, physica status solidi (b).
[8] A. Cuevas,et al. Tantalum Nitride Electron‐Selective Contact for Crystalline Silicon Solar Cells , 2018 .
[9] Yu Huang,et al. Approaching the Schottky–Mott limit in van der Waals metal–semiconductor junctions , 2018, Nature.
[10] W. Kessels,et al. Passivating Contacts for Crystalline Silicon Solar Cells: From Concepts and Materials to Prospects , 2018, IEEE Journal of Photovoltaics.
[11] K. Davis,et al. Influence of surface preparation and cleaning on the passivation of boron diffused silicon surfaces for high efficiency photovoltaics , 2017 .
[12] A. Gabor,et al. Detailed investigation of TLM contact resistance measurements on crystalline silicon solar cells , 2017 .
[13] R. Brendel,et al. Interdigitated back contact solar cells with polycrystalline silicon on oxide passivating contacts for both polarities , 2017 .
[14] A. Aberle,et al. Surface passivation investigation on ultra-thin atomic layer deposited aluminum oxide layers for their potential application to form tunnel layer passivated contacts , 2017 .
[15] K. Davis,et al. Transmission electron microscopy based interface analysis of the origin of the variation in surface recombination of silicon for different surface preparation methods and passivation materials , 2017 .
[16] Xinbo Yang,et al. Industrially feasible, dopant‐free, carrier‐selective contacts for high‐efficiency silicon solar cells , 2017 .
[17] A. Javey,et al. Conductive and Stable Magnesium Oxide Electron‐Selective Contacts for Efficient Silicon Solar Cells , 2017 .
[18] J. John,et al. Simplified cleaning for 22.5% nPERT solar cells with rear epitaxial emitters , 2016 .
[19] R. Brendel,et al. Contact Selectivity and Efficiency in Crystalline Silicon Photovoltaics , 2016, IEEE Journal of Photovoltaics.
[20] Xinbo Yang,et al. High‐Performance TiO2‐Based Electron‐Selective Contacts for Crystalline Silicon Solar Cells , 2016, Advanced materials.
[21] C. Voz,et al. Transition metal oxides as hole-selective contacts in silicon heterojunctions solar cells , 2016 .
[22] A. Javey,et al. Efficient silicon solar cells with dopant-free asymmetric heterocontacts , 2016, Nature Energy.
[23] T. Mikolajick,et al. Al2O3-TiO2 Nanolaminates for Conductive Silicon Surface Passivation , 2016, IEEE Journal of Photovoltaics.
[24] M. Hermle,et al. Molybdenum and tungsten oxide: High work function wide band gap contact materials for hole selective contacts of silicon solar cells , 2015 .
[25] J. John,et al. Large-Area n-Type PERT Solar Cells Featuring Rear p+ Emitter Passivated by ALD Al2 O3 , 2015, IEEE Journal of Photovoltaics.
[26] Lachlan E. Black,et al. On effective surface recombination parameters , 2014 .
[27] S. Glunz,et al. Carrier-selective contacts for Si solar cells , 2014 .
[28] C. Battaglia,et al. Silicon heterojunction solar cell with passivated hole selective MoOx contact , 2014 .
[29] Keith R. McIntosh,et al. A Roadmap for PERC Cell Efficiency towards 22%, Focused on Technology-related Constraints , 2014 .
[30] S. Glunz,et al. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics , 2014 .
[31] K. Jiang,et al. Influence of precursor gas ratio and firing on silicon surface passivation by APCVD aluminium oxide , 2013 .
[32] Wmm Erwin Kessels,et al. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells , 2012 .
[33] K. McIntosh,et al. Surface passivation of c-Si by atmospheric pressure chemical vapor deposition of Al2O3 , 2012 .
[34] C. Ballif,et al. High-efficiency Silicon Heterojunction Solar Cells: A Review , 2012 .
[35] Fred Roozeboom,et al. High‐Speed Spatial Atomic‐Layer Deposition of Aluminum Oxide Layers for Solar Cell Passivation , 2010, Advanced materials.
[36] Jan Benick,et al. High-Efficiency c-Si Solar Cells Passivated With ALD and PECVD Aluminum Oxide , 2010, IEEE Electron Device Letters.
[37] R. Williams,et al. Atomic layer deposition of aluminum oxide on hydrophobic and hydrophilic surfaces , 2007 .
[38] Wmm Erwin Kessels,et al. Ultralow surface recombination of c-Si substrates passivated by plasma-assisted atomic layer deposited Al2O3 , 2006 .
[39] D. Schroder,et al. Contact resistance: Its measurement and relative importance to power loss in a solar cell , 1984, IEEE Transactions on Electron Devices.