Experimental investigation of the effect of partial shading on photovoltaic performance

Partial shading of a photovoltaic (PV) installation has an inconsistent impact on power production. This study investigates the effect of partial shading on PV performance. The experiments were carried out with a 90-W PV module under both variable and constant irradiations with shaded area increased from 0 to 80% to observe the effect of variable solar radiation at certain shading points. The effect of shading under irradiation levels from 300 to 800 W/m2 was investigated. At a 600 W/m2 irradiation level, the shading impact factor was 1.25 with a 25% shading, while at 75% shading the impact factor decreased to 0.86. Results also show that for every 100 W/m2 increase in irradiation level, the electrical power output was enhanced by 3.89, 3.37, 2.27, and 2.02 W at 0, 25, 50, and 75% shading, respectively. The efficiency level was increased by 0.29, 0.27, 0.25, and 0.22% at 0, 25, 50, and 75% shading, respectively. Increasing the shaded area by 10% causes a 12.41 W drop in power output and a 2.3% drop in electrical efficiency. Partial shading not only deteriorates the PV performance, but also causes long-term degradation of the module.

[1]  G. Notton,et al.  Photovoltaic energy generation under partially shading conditions , 2009, 2009 8th International Symposium on Advanced Electromechanical Motion Systems & Electric Drives Joint Symposium.

[2]  Ali Assi,et al.  Removal of air blown dust from photovoltaic arrays using forced air flow of return air from air conditioning systems , 2012, 2012 International Conference on Renewable Energies for Developing Countries (REDEC).

[3]  R. W. Erickson,et al.  Characterization of Power Optimizer Potential to Increase Energy Capture in Photovoltaic Systems Operating Under Nonuniform Conditions , 2013, IEEE Transactions on Power Electronics.

[4]  Ben Bourne,et al.  Efficiency VS. irradiance characterization of PV modules requires angle-of-incidence and spectral corrections , 2010, 2010 35th IEEE Photovoltaic Specialists Conference.

[5]  M. Y. Hassan,et al.  Effect of losses resistances, module temperature variation, and partial shading on PV output power , 2012, 2012 IEEE International Conference on Power and Energy (PECon).

[6]  Aissa Chouder,et al.  Study of bypass diodes configuration on PV modules , 2009 .

[7]  M. K. El-Adawi,et al.  The temperature functional dependence of VOC for a solar cell in relation to its efficiency new approach , 2007 .

[8]  R. Ghajar,et al.  Modeling and simulation of PV arrays under varying conditions , 2014, MELECON 2014 - 2014 17th IEEE Mediterranean Electrotechnical Conference.

[9]  Jeyraj Selvaraj,et al.  Global prospects, progress, policies, and environmental impact of solar photovoltaic power generation , 2015 .

[10]  Sonia Leva,et al.  Experimental investigation of partial shading scenarios on PV (photovoltaic) modules , 2013 .

[11]  A. D. Jones,et al.  A thermal model for photovoltaic systems , 2001 .

[13]  Nasrudin Abd Rahim,et al.  Effects of operational conditions on the energy efficiency of photovoltaic modules operating in Malaysia , 2017 .

[14]  Jubaer Ahmed,et al.  A critical evaluation on maximum power point tracking methods for partial shading in PV systems , 2015 .

[15]  Chris Deline,et al.  Partially shaded operation of a grid-tied PV system , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).

[16]  R. Ramaprabha,et al.  Impact of Partial Shading on Solar PV Module Containing Series Connected Cells , 2009 .

[17]  A. Chouder,et al.  Shading effects in characteristic parameters of PV modules , 2007, 2007 Spanish Conference on Electron Devices.

[18]  N. Rahim,et al.  Effects of various parameters on PV-module power and efficiency , 2015 .

[19]  Koray Şener Parlak,et al.  PV array reconfiguration method under partial shading conditions , 2014 .

[20]  J. Kamala,et al.  PV array characteristics analysis under partial shading & modeling of P&O MPPT applied boost convertor using Matlab/Simulink , 2013, 2013 International Conference on Energy Efficient Technologies for Sustainability.

[21]  Optical loss of photovoltaic modules under diffuse light , 2003 .

[22]  R. Anto,et al.  Analytical and experimental analysis of optimal tilt angle of solar photovoltaic systems , 2012, 2012 International Conference on Green Technologies (ICGT).

[23]  R. Miceli,et al.  Reconfiguration strategies to reduce mismatch effects on PV array: An Arduino-based prototype , 2014, 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion.

[24]  Charles R. Sullivan,et al.  Partial-Shading Assessment of Photovoltaic Installations via Module-Level Monitoring , 2014, IEEE Journal of Photovoltaics.

[25]  Muhammad Ashraful Alam,et al.  Performance and Reliability Implications of Two-Dimensional Shading in Monolithic Thin-Film Photovoltaic Modules , 2013, IEEE Journal of Photovoltaics.