A new class-C very low phase-noise Ku-band VCO in 0.25 µm SiGe:C BiCMOS technology

This paper presents a very low phase noise, fully integrated and differential Ku-band Voltage Controlled Oscillator (VCO) implemented in the QUBiC4X 0.25 μm SiGe:C BiCMOS process of NXP semiconductors. The originality of this design consists in using a new class-C architecture type. Under 5 V supply voltage and a maximum power dissipation of 123 mW, the proposed VCO features a worst case phase noise of -97 dBc/Hz at 100 kHz frequency offset from a 14.45 GHz carrier. The VCO is tuned from 13.59 GHz to 14.89 GHz with a tuning voltage varying from 1 V to 4.5 V and occupies 0.83×1.05 mm2.

[2]  Kaixue Ma,et al.  Design of a Ku-band Low-Phase-Noise VCO Using the Dual $LC$ Tanks , 2012, IEEE Transactions on Circuits and Systems II: Express Briefs.

[3]  E. van der Heijden,et al.  A low phase noise Colpitts VCO for Ku-band applications , 2012, 2012 IEEE Bipolar/BiCMOS Circuits and Technology Meeting (BCTM).

[4]  Salvatore Levantino,et al.  A varactor configuration minimizing the amplitude-to-phase noise conversion in VCOs , 2006, IEEE Transactions on Circuits and Systems I: Regular Papers.

[5]  Ali Hajimiri,et al.  A general theory of phase noise in electrical oscillators , 1998 .

[6]  Jong-Wook Lee,et al.  Ultralow-Power Ku-Band Dual-Feedback Armstrong VCO With a Wide Tuning Range , 2012, IEEE Transactions on Circuits and Systems II: Express Briefs.