NEW GENERATION OF HEALTHY SNACK FOOD BY SUPERCRITICAL FLUID EXTRUSION

ABSTRACT A supercritical fluid extrusion (SCFX) process has been successfully developed for the production of a novel healthy snack containing 40–60 wt% protein with unique porous structure and texture. Supercritical carbon dioxide (SC-CO2) injection rate and product temperature at the die were found to be critical to control the expansion and texture of the final product. Maximum cross-sectional expansion was obtained at 0.3 wt% added SC-CO2, whereas more uniform internal structure was achieved at 0.7 wt% SC-CO2 level. As whey protein concentrate (80 wt%) concentration was increased from 52.8 to 78.2 wt% in the formulation, the cross-sectional expansion of baked and fried products increased by 65.8 and 44.4%, respectively. It was observed that lower viscosity of whey protein compared with starch decreased expansion but helped enhance further expansion during post-extrusion drying. The finding showed that an extrusion process at the temperature below protein denaturation temperature using SC-CO2 can help to prevent hard texture due to the thermosetting property of whey protein and to create a uniformly expanded structure. The textural properties of SCFX chips were comparable to commercial extruded or fried chip products. PRACTICAL APPLICATIONS The American snack market is one of fast-growing markets in the world as snacking becomes more popular. Because of the increasing concerns about health, there is also an increasing demand for new healthy snacks as an alternative for fried starch-based snacks with low nutrient density. This study shows the potential of supercritical fluid extrusion (SCFX) technology for healthy snack food production containing whey protein. SCFX chips had uniform cellular microstructure that cannot be obtained using conventional steam-based extrusion. As supercritical carbon dioxide can deliver certain flavors, an expanded snack not only with high nutrient density and unique texture but also with encapsulated flavors can be produced using the SCFX process and can be marketed as a novel healthy snack.

[1]  H. Ramaswamy,et al.  Interactive Effects of Factors Affecting Gelation of Whey Proteins , 1997 .

[2]  D. Rousseau,et al.  Engineering triacylglycerols: The role of interesterification , 1995 .

[3]  R. Boileau,et al.  A reduced ratio of dietary carbohydrate to protein improves body composition and blood lipid profiles during weight loss in adult women. , 2003, The Journal of nutrition.

[4]  R. Konstance,et al.  Temperature profiling: Solution to problems of co-extrusion with whey proteins , 2003 .

[5]  T. J. Shankar,et al.  PROCESS VARIABLES DURING SINGLE-SCREW EXTRUSION OF FISH AND RICE-FLOUR BLENDS , 2005 .

[6]  Milford A. Hanna,et al.  Physical and Functional Properties of Twin-screw Extruded Whey Protein Concentrate–Corn Starch Blends , 1997 .

[7]  J. Bouvier,et al.  Melt growth and shrinkage at the exit of the die in the extrusion-cooking process , 2003 .

[8]  Syed S. H. Rizvi,et al.  The combined application of supercritical fluid and extrusion technology , 1995 .

[9]  C. Bryant,et al.  Optimizing Preparation Conditions for Heat‐denatured Whey Protein Solutions to be Used as Cold‐gelling Ingredients , 2000 .

[10]  B. Launay,et al.  Twin-screw extrusion cooking of starches: Flow behaviour of starch pastes, expansion and mechanical properties of extrudates , 1983 .

[11]  G. Bounous.  Whey protein concentrate (WPC) and glutathione modulation in cancer treatment. , 2000, Anticancer research.

[12]  S. Rizvi,et al.  Supercritical fluid extrusion supercritical fluid extrusion of masa-based snack chips , 2002 .

[13]  E. Foegeding,et al.  A comparison of drying operations on the rheological properties of whey protein thickening ingredients , 2004 .

[14]  Rosana G. Moreira,et al.  Effect of Degree of Starch Gelatinization on Quality Attributes of Fried Tortilla Chips , 2001 .

[15]  S. Rizvi,et al.  Structural properties of protein-stabilized starch-based supercritical fluid extrudates , 1999 .

[16]  Chul B. Park,et al.  Challenge to fortyfold expansion of biodegradable polyester foams by using carbon dioxide as a blowing agent , 2000 .

[17]  P. Halley,et al.  Macromolecular Interactions During Gelatinisation and Retrogradation in Starch-Whey Systems as Studied by Rapid Visco-Analyser , 2006 .

[18]  B. K. Kim,et al.  EXTRUSION OF MINCED CATFISH WITH CORN AND DEFATTED SOY FLOURS FOR SNACK FOODS , 2004 .

[19]  S. Rakshit,et al.  Cassava starch snack formulation using functional shell fish by-products: mechanical, sorption and geometric properties , 2005 .

[20]  L. Rooney,et al.  Corn starch changes during tortilla and tortilla chip processing , 1992 .

[21]  Chul B. Park,et al.  Microcellular sheet extrusion system process design models for shaping and cell growth control , 1998 .

[22]  Philip Smith,et al.  Co-extrusion of Dietary Fiber and Milk Proteins in Expanded Corn Products , 2001 .

[23]  J. Arěas,et al.  Acceptability of snacks produced by the extrusion of amaranth and blends of chickpea and bovine lung , 2003 .

[24]  J. Maga,et al.  Properties of extruded whey protein concentrate and cereal flour blends , 1987 .

[25]  P. Hollingsworth,et al.  Food advertising at the crossroads : now for an FTC-approved word from our sponsor , 1993 .

[26]  D. McCarron,et al.  Benefits of Dairy Product Consumption on Blood Pressure in Humans: A Summary of the Biomedical Literature , 2000, Journal of the American College of Nutrition.

[27]  S. Rizvi,et al.  Rheology and Expansion of Starch-Water-CO2 Mixtures with Controlled Gelatinization by Supercritical Fluid Extrusion , 2006 .

[28]  I. S. Kim,et al.  Physical evaluation of popped cereal snacks with spent hen meat. , 2003, Meat science.