Online optimal control schemes of inlet steam temperature during startup of steam turbines considering low cycle fatigue

Great thermal stresses and fatigue damages will be developed during the startup of steam turbines, which will threaten the safety of operation. To save energy and improve the flexibility of the power unit, inlet steam temperature of steam turbines should be controlled online in an optimal way. A new method to obtain online optimal control schemes of the inlet steam temperature considering low cycle fatigue is presented in this paper using the Green's Function Method and the Pontryagin's Maximum Principle. New analytical models of temperature and thermal stresses are proposed. For a hot startup, constant material properties are used and the steam temperature history that can maintain maximum Von Mises stress close to the permitted value is proved to be the optimal control scheme. For a cold or warm startup, the optimization thermal stress considering temperature dependent material properties is found to be determinated by material properties and Green's functions, which may not be equal to the maximum permitted value. Application of the proposed method to the cold start-up process of a 600 MW steam turbine is introduced. Compared with the conventional start-up scheduling, the proposed optimal control scheme can shorten the time of startup greatly without exceeding permitted fatigue damage.

[1]  Matsumoto Hiroshi,et al.  Startup optimization of a combined cycle power plant based on cooperative fuzzy reasoning and a neural network , 1997 .

[2]  Danmei Xie,et al.  Approximate analytical models of temperature and thermal stresses for 2D axis-symmetry object with temperature-dependent properties , 2012 .

[3]  Renata Dwornicka,et al.  Optimization of heating and cooling operations of steam gate valve , 2009 .

[4]  Dawid Taler,et al.  Determination of start-up curves for a boiler with natural circulation based on the analysis of stress distribution in critical pressure components , 2015 .

[5]  Danmei Xie,et al.  Improved first order approximate models of temperature and thermal stresses for online fatigue monitoring , 2017 .

[6]  Alberto Mirandola,et al.  Dynamic behaviour analysis of a three pressure level heat recovery steam generator during transient operation , 2015 .

[7]  Alberto Mirandola,et al.  On the operation strategy of steam power plants working at variable load: Technical and economic issues , 2012 .

[8]  H. Matsumoto,et al.  Turbine Control System Based on Prediction of Rotor Thermal Stress , 1982, IEEE Transactions on Power Apparatus and Systems.

[9]  Dawid Taler,et al.  Optimization of the boiler start-up taking into account thermal stresses , 2015 .

[10]  Bernd Epple,et al.  A comparative study of different dynamic process simulation codes for combined cycle power plants – Part A: Part loads and off-design operation , 2015 .

[11]  Alberto Mirandola,et al.  Evaluation of the effects of the operation strategy of a steam power plant on the residual life of its devices , 2010 .

[12]  Bernd Epple,et al.  A comparative study of different dynamic process simulation codes for combined cycle power plants – Part B: Start-up procedure , 2015 .

[13]  Hermann Lang,et al.  Performance study of Ke factors in simplified elastic plastic fatigue analyses with emphasis on thermal cyclic loading , 2011 .

[14]  L. S. Pontryagin,et al.  Mathematical Theory of Optimal Processes , 1962 .

[15]  Piotr Duda,et al.  Numerical method for determining the allowable medium temperature during the heating operation of a thick‐walled boiler element in a supercritical steam power plant , 2012 .

[16]  Philip J. Bendeich,et al.  The use of a simplified analytical expression for metastable thermal stress analysis and its application to creep–fatigue damage of a 2.25Cr 1Mo thick walled component , 2010 .

[17]  Grzegorz Nowak,et al.  Practical Algorithms for Online Thermal Stress Calculations and Heating Process Control , 2014 .

[18]  Hengliang Zhang.  Online Thermal Monitoring Models for Induction Machines , 2015, IEEE Transactions on Energy Conversion.