Control and efficiency analysis for a Lundell-alternator/active-rectifier system in automotive applications

This paper presents a control strategy for a conventional Lundell alternator and an active-rectifier. The control scheme focuses on the minimisation of the stator copper losses of the alternator in an effort to maximise its efficiency. The modulation scheme of the active-rectifier is being investigated with the introduction of three different modulation techniques in order to quantify the effect they have on the alternator's efficiency. Steady-state results from experimental measurements of the alternator rectifier system are compared against a standard passive rectifier. The comparison indicates that the modulation scheme of the active-rectifier is significant to the alternator's efficiency as well as to the overall system efficiency.

[1]  U. Ammann,et al.  A smart synchronous rectifier for 12 V automobile alternators , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[2]  Tore Undeland,et al.  Power Electronics: Converters, Applications and Design , 1989 .

[3]  Bimal K. Bose,et al.  Modern Power Electronics and AC Drives , 2001 .

[4]  Thomas A. Lipo,et al.  Pulse Width Modulation for Power Converters: Principles and Practice , 2003 .

[5]  Mohammed Alnajjar,et al.  Minimization of Energy Losses in the Traction Drive of HEV Using Optimized Adaptive Control , 2014, 2014 IEEE Vehicle Power and Propulsion Conference (VPPC).

[6]  John Michael Miller,et al.  A control scheme to maximize output power of a synchronous alternator in a vehicle electrical power generation system , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[7]  Feng Liang,et al.  A vehicle electric power generation system with improved output power and efficiency , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[8]  Ion Boldea,et al.  Active flux based motion-sensorless vector control of DC-excited synchronous machines , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[9]  Philippe Viarouge,et al.  Experimental comparison of rectifiers for Lundell automotive alternators , 2009, 2009 13th European Conference on Power Electronics and Applications.

[10]  T. O'Gorman,et al.  A rotor and stator method to increase the power available from an automotive alternator at idle speed , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[11]  Atif Iqbal,et al.  High Performance Control of AC Drives with MATLAB/Simulink Models: Abu-Rub/High Performance Control of AC Drives with MATLAB/Simulink Models , 2012 .

[12]  Dushan Boroyevich,et al.  A Unified Control for the Combined Permanent Magnet Generator and Active Rectifier System , 2014, IEEE Transactions on Power Electronics.

[13]  D.J. Perreault,et al.  Thermal modeling of Lundell alternators , 2005, IEEE Transactions on Energy Conversion.

[14]  D.J. Perreault,et al.  Automotive power generation and control , 2004, IEEE Transactions on Power Electronics.

[15]  R. W. De Doncker,et al.  Advanced Electrical Drives: Analysis, Modeling, Control , 2010 .

[16]  T. O'Gorman,et al.  Automotive Alternator Synchronous Rectificaton Via Self-Sensing Method for Improved Vehicle Fuel Consumption , 2007, 2007 IEEE Industry Applications Annual Meeting.