Roller-type gravure offset printing of conductive inks for high-resolution printing on ceramic substrates

The use of gravure offset printing methods at an industrial level requires a wide and deep knowledge of the printing properties of the inks. Novel hydrocarbon inks were developed with superior printing properties compared to alternative ethyl cellulose-based inks. There are principal behaviour properties of these inks that can be generally described. In particular, the resistance dependence of printed mass for single and multiprints and on the other hand, the effect of multiprinting on printed area smoothness and line height. This article summarizes the results obtained and describes printing properties and defects: line widening, hair formation, ink flow from the gravure grooves, pinholes, image distortions, ribbing, scooping, streaking and gravure groove blocking. Three different printed samples were demonstrated, which are best suited for this manufacturing method: interdigital capacitor, inductor coil and laser soldering substrates.

[1]  S. Leppävuori,et al.  Gravure offset printing of polymer inks for conductors , 2004 .

[2]  Masahide Tsukamoto,et al.  Giant Micro-Electronics Technology Using Gravure Printing Techniques , 1991 .

[3]  Jörg-Uwe Meyer,et al.  A novel thick-film ceramic humidity sensor , 1997 .

[4]  John Cocker,et al.  The use of thick print copper and silver conductors for power applications , 2000 .

[5]  S. Leppävuori,et al.  Methods for the evaluation of fine-line offset gravure printing inks for ceramics , 2004 .

[6]  Seppo Leppävuori,et al.  Different thick-film methods in printing of one-electrode semiconductor gas sensors , 1996 .

[7]  Marko Pudas,et al.  The absorption ink transfer mechanism of gravure offset printing for electronic circuitry , 2002 .

[8]  M. Gaynes,et al.  Flip chip attach with thermoplastic electrically conductive adhesive , 1998, Proceedings of 3rd International Conference on Adhesive Joining and Coating Technology in Electronics Manufacturing 1998 (Cat. No.98EX180).

[9]  R. B. Tait,et al.  Thick film heater elements and temperature sensors in modern domestic appliances , 1994 .

[10]  Seppo Leppaevuori,et al.  Method for manufacturing high-quality gravure plates for printing fine-line electrical circuits , 1999, Smart Materials, Nano-, and Micro- Smart Systems.

[11]  P. Schweizer,et al.  Liquid film coating : scientific principles and their technological implications , 1997 .

[12]  M. Lahti,et al.  Gravure-offset-printing technique for the fabrication of solid films , 1999 .

[13]  S. Leppävuori,et al.  Printing parameters and ink components affecting ultra-fine-line gravure-offset printing for electronics applications , 2004 .

[14]  Marko Pudas,et al.  Gravure offset printing development for fine line thick film circuits , 2001 .

[15]  S. Okazaki,et al.  Printing Color Filter for Active Matrix Liquid-Crystal Display Color Filter , 1991 .

[16]  V. Lantto,et al.  Planar inductors on an LTCC substrate realized by the gravure-offset-printing technique , 2000 .