Heat transfer of granular flow around aligned tube bank in moving bed: Experimental study and theoretical prediction by thermal resistance model

[1]  Qiuwan Wang,et al.  Heat transfer prediction of granular flow in moving bed heat exchanger: Characteristics of heat transfer enhancement and dynamic control , 2021, Solar Energy.

[2]  F. Bai,et al.  Theoretical and experimental investigation on heating moving packed beds in a single tube with constant wall temperature , 2021 .

[3]  J. Valverde,et al.  The cohesive behavior of granular solids at high temperature in solar energy storage , 2021, Energy Conversion and Management.

[4]  Qiuwan Wang,et al.  Numerical investigation of heat resistances in uniform dense granular flows along a vertical plate , 2021 .

[5]  Haozhong Huang,et al.  Opportunities and strategies for multigrade waste heat utilization in various industries: A recent review , 2021 .

[6]  Jingying Xu,et al.  Predicting heat transfer coefficient of a shell-and-plate, moving packed-bed particle-to-sCO2 heat exchanger for concentrating solar power , 2021 .

[7]  Mingzhang Pan,et al.  Thermodynamic, economic, and environmental analysis of new combined power and space cooling system for waste heat recovery in waste-to-energy plant , 2020 .

[8]  Xin‐Rong Zhang,et al.  Comparative study on the thermal-hydraulic performance of a shell and plate particle-SCO2 moving packed bed heat exchanger with various channel configurations , 2020 .

[9]  Qiuwan Wang,et al.  Comparison of Heat Transfer in Gravity-Driven Granular Flow near Different Surfaces , 2020, Journal of Thermal Science.

[10]  Qiuwan Wang,et al.  Technologies and fundamentals of waste heat recovery from high-temperature solid granular materials , 2020 .

[11]  Qiuwan Wang,et al.  Numerical investigation of tube oscillation in gravity-driven granular flow with heat transfer by discrete element method , 2020 .

[12]  G. Flamant,et al.  Design and performance of a modular combined cycle solar power plant using the fluidized particle solar receiver technology , 2020 .

[13]  Ben-Wen Li,et al.  A model to determine the overall bed-to-wall heat transfer coefficient and its influence factor analysis in moving bed , 2020, International Journal of Heat and Mass Transfer.

[14]  Yingying Sun,et al.  An efficient solar/lignite hybrid power generation system based on solar-driven waste heat recovery and energy cascade utilization in lignite pre-drying , 2020 .

[15]  R. Gould,et al.  Analytic Modeling of Heat Transfer to Vertical Dense Granular Flows , 2020 .

[16]  Qiuwan Wang,et al.  Waste heat recovery from high-temperature solid granular materials: Energy challenges and opportunities , 2019 .

[17]  Jingzheng Ren,et al.  Energy conversion of urban wastes in China: Insights into potentials and disparities of regional energy and environmental benefits , 2019, Energy Conversion and Management.

[18]  Binfan Jiang,et al.  Efficient waste heat recovery system for high-temperature solid particles based on heat transfer enhancement , 2019, Applied Thermal Engineering.

[19]  D. Taler,et al.  Monitoring of transient 3D temperature distribution and thermal stress in pressure elements based on the wall temperature measurement , 2019, Journal of thermal stresses.

[20]  S. Zunft,et al.  Granular flow around the horizontal tubes of a particle heat exchanger: DEM-simulation and experimental validation , 2019, Solar Energy.

[21]  C. Ho,et al.  Design and operating considerations for a shell-and-plate, moving packed-bed, particle-to-sCO2 heat exchanger , 2019, Solar Energy.

[22]  Qiang Zhao,et al.  Heat transfer of calcined petroleum coke and heat exchange tube for calcined petroleum coke waste heat recovery , 2018, Energy.

[23]  Clifford K. Ho,et al.  Concentrating Solar Power Gen3 Demonstration Roadmap , 2017 .

[24]  Yan Liu,et al.  Experimental study of commercial charcoal as alternative fuel for coke breeze in iron ore sintering process , 2016 .

[25]  Qingbo Yu,et al.  Thermal energy recovery from high-temperature blast furnace slag particles☆ , 2015 .

[26]  M. Bussmann,et al.  Counter-current parallel-plate moving bed heat exchanger: An analytical solution , 2015 .

[27]  S. Abdel-Khalik,et al.  Study on Solid Particles as a Thermal Medium , 2014 .

[28]  Hairui Yang,et al.  Theoretical and experimental analysis of bed-to-wall heat transfer in heat recovery processing , 2013 .

[29]  Torsten Baumann,et al.  Development and Performance Assessment of a Moving Bed Heat Exchanger for Solar Central Receiver Power Plants , 2015 .

[30]  Reg Freeman,et al.  Measuring the flow properties of consolidated, conditioned and aerated powders — A comparative study using a powder rheometer and a rotational shear cell , 2007 .

[31]  Roberto Zenit,et al.  Dense granular flow around an immersed cylinder , 2003 .

[32]  S. Youn,et al.  Finite element analysis of the flow and heat transfer of solid particles in moving beds , 1998 .

[33]  M. Hunt,et al.  HEAT TRANSFER IN VERTICAL GRANULAR FLOWS , 1997 .

[34]  H. Takeuchi.  Particles flow pattern and local heat transfer around tube in moving bed , 1996 .

[35]  J. Niegsch,et al.  Heat transfer and flow of bulk solids in a moving bed , 1994 .

[36]  M. Colakyan,et al.  Heat transfer between moving beds of solids and a transverse finned tube , 1991 .

[37]  R. H. Sabersky,et al.  Convective heat transfer to rapidly flowing, granular materials , 1986 .

[38]  G.S.V. Raghavan,et al.  Heat transfer between flowing granular materials and immersed objects. , 1980 .

[39]  J. Botterill,et al.  A theoretical model of heat transfer to a packed or quiescent fluidized bed , 1978 .

[40]  J. K. Spelt,et al.  Heat transfer to flowing granular media , 1975 .

[41]  Yu. P. Kurochkin,et al.  Heat transfer between tubes of different sections and a stream of granular material , 1966, Journal of engineering physics.