Convective Drying of Agitated Silica Gel and Beech Wood Particle Beds—Experiments and Transient DEM-CFD Simulations

With coupled discrete element (DEM)–computational fluid dynamics (CFD) simulations, drying processes can be simultaneously described on the system scale while resolving detailed subprocesses on the particle scale. In this contribution, DEM-CFD simulations are used to analyze the transient heat and mass transfer in mechanically agitated particle beds during drying. Results are compared to convective batch-drying experiments with silica gel and beech wood spheres and mixing effects are studied in detail. A good agreement with the measurements of both single-particle and particle bed drying is achieved by resolving heat and moisture transport three-dimensionally inside each particle.

[1]  Siegmar Wirtz,et al.  Discrete element analysis of experiments on mixing and stoking of monodisperse spheres on a grate , 2011 .

[2]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[3]  M. Grønli,et al.  A theoretical and experimental study of the thermal degradation of biomass , 1996 .

[4]  Metin Renksizbulut,et al.  Transient three-dimensional heat transfer from rotating spheres with surface blowing , 2003 .

[5]  U. Eiden.  W. Kast: Adsorption aus der Gasphase, Ingenieurwissenschaftliche Grundlagen und technische Verfahren, VCH Verlagsgesellschaft, Weinheim, Basel, Cambridge, New York 1988. 279 Seiten, Preis: DM 220,00 , 1990 .

[6]  W. K. Lewis.  The Rate of Drying of Solid Materials. , 1921 .

[7]  Patrick Perré,et al.  Multiscale Modeling of Drying as a Powerful Extension of the Macroscopic Approach: Application to Solid Wood and Biomass Processing , 2010 .

[8]  Siegmar Wirtz,et al.  Coupled DEM/CFD simulation of heat transfer in a generic grate system agitated by bars , 2013 .

[9]  Henk A. van der Vorst,et al.  Bi-CGSTAB: A Fast and Smoothly Converging Variant of Bi-CG for the Solution of Nonsymmetric Linear Systems , 1992, SIAM J. Sci. Comput..

[10]  T. Oschmann,et al.  Numerical investigation of mixing and orientation of non-spherical particles in a model type fluidized bed , 2014 .

[11]  Siegmar Wirtz,et al.  A study on the influence of particle shape and shape approximation on particle mechanics in a rotating drum using the discrete element method , 2014 .

[12]  S. Whitaker.  Simultaneous Heat, Mass, and Momentum Transfer in Porous Media: A Theory of Drying , 1977 .

[13]  Jintang Li,et al.  APPLICATION OF THE DISCRETE ELEMENT MODELLING IN AIR DRYING OF PARTICULATE SOLIDS , 2002 .

[14]  James J. Carberry,et al.  Local and average interphase heat transfer coefficients in a randomly packed bed of spheres , 1968 .

[15]  B. Peters,et al.  Application of XDEM as a novel approach to predict drying of a packed bed , 2014 .

[16]  E. Tsotsas,et al.  An irregular pore network model for convective drying and resulting damage of particle aggregates , 2012 .

[17]  F. N. Peebles,et al.  Local rates of mass transfer from spheres in ordered arrays , 1965 .

[18]  Thanit Swasdisevi,et al.  Investigation of Temperature Distribution and Heat Transfer in Fluidized Bed Using a Combined CFD-DEM Model , 2011 .

[19]  O. Walton.  Application of molecular dynamics to macroscopic particles , 1984 .

[20]  Ian C. Kemp,et al.  Drying Software: Past, Present, and Future , 2007 .

[21]  C. Crowe,et al.  The Particle-Source-In Cell (PSI-CELL) Model for Gas-Droplet Flows , 1977 .