Construction worker fatalities related to trusses: an analysis of the OSHA fatality and catastrophic incident database

Abstract This study was conducted to gain a better understanding of the risks associated with truss installation in building projects. The Occupational Safety and Health Administration (OSHA) fatality and catastrophic incident database was analyzed for the years inclusive of 1990–2009. The database includes over 15,000 incidents, 211 of which pertain to trusses. The incidents were analyzed as to the number of fatalities per incident, the type of truss, the truss material, the activity taking place at the time of the accident, the release of the hoisting equipment, the initiation of the accident, the presence of bracing materials, the type of construction, the length of the trusses, the location of the incident, the type of accident (fall, caught-in/between, struck by, or electrocution), and the year the fatality occurred. Many of the accidents occurred at elevation and were initiated in large part by moving or falling objects. The study recommends that further research should focus on the stabilization of incomplete roof structures and the implementation of best practices for fall protection while performing truss-related work.

[1]  Davide Nicolini,et al.  Toward a Social Understanding of How People Learn in Organizations , 1998 .

[2]  K. C. McMartin,et al.  Strength and structural safety of long-span light wood roof trusses. Reliability analysis using safety index , 1985 .

[3]  Ann Marie Dale,et al.  Fall hazard control observed on residential construction sites. , 2009, American journal of industrial medicine.

[4]  B Y Jeong,et al.  Occupational deaths and injuries in the construction industry. , 1998, Applied ergonomics.

[5]  Theodore V. Galambos,et al.  The effect of lateral bracing on the stability of steel trusses , 1991 .

[6]  K. C. McMartin,et al.  Strength and structural safety of long-span light wood roof trusses , 1984 .

[7]  Ann Marie Dale,et al.  Challenges in residential fall prevention: insight from apprentice carpenters. , 2008, American journal of industrial medicine.

[8]  Brenda White,et al.  DEPARTMENT OF LABOR , 2006 .

[9]  John A. Gambatese,et al.  Can Design Improve Construction Safety?: Assessing the Impact of a Collaborative Safety-in-Design Process , 2005 .

[10]  Paul Swuste,et al.  Is it possible to influence safety in the building sector? A literature review extending from 1980 until the present , 2012 .

[11]  Pete Kines,et al.  Construction workers' falls through roofs: fatal versus serious injuries. , 2002, Journal of safety research.

[12]  Ann Marie Dale,et al.  Fall prevention among apprentice carpenters. , 2010, Scandinavian journal of work, environment & health.

[13]  Ann Marie Dale,et al.  Changes in fall prevention training for apprentice carpenters based on a comprehensive needs assessment. , 2010, Journal of safety research.

[14]  Linda Forst,et al.  Fatal Falls in the US Construction Industry, 1990 to 1999 , 2001, Journal of occupational and environmental medicine.

[15]  Panagiotis Mitropoulos,et al.  Analysis of Residential Framing Accidents, Activities, and Task Demands , 2010 .

[16]  Piotr Iwicki,et al.  Sensitivity analysis of critical forces of trusses with side bracing , 2010 .