Flexible pyroelectric generators for scavenging ambient thermal energy and as self-powered thermosensors

Wasted heat is one of the most abundant and widely available energy sources in our living environment and industrial activities. A lot of attentions have been paid on harvesting ambient wasted thermal energy. In this work, a flexible PG (pyroelectric generator) based upon a thin PVDF (polyvinylidene fluoride) film has been fabricated. Based on the pyroelectric effect, the PG can harvest thermal energy arising from the time-dependent fluctuating temperature with spatial uniformity. At the temperature change of 50 K, the PG can deliver an open-circuit voltage of 8.2 V and a short-circuit current of 0.8 μA, respectively, with the maximal output power of 2.2 μW on a load of 0.1 MΩ, which can be utilized to directly drive a LCD (liquid crystal display) or LEDs (light emitting diodes), or to charge a commercial capacitor for subsequent usages. Moreover, the PG can be used to construct a self-powered thermosensor as a result of the linear relationship between the output voltage and the temperature change. Our study promotes the development of the PG for scavenging wasted thermal energy and opens up plenty of potential self-powered applications.

[1]  P. L. Hagelstein,et al.  Enhanced figure of merit in thermal to electrical energy conversion using diode structures , 2002 .

[2]  N. Lee,et al.  Utilizing Highly Crystalline Pyroelectric Material as Functional Gate Dielectric in Organic Thin‐Film Transistors , 2009 .

[3]  Long Lin,et al.  Pyroelectric nanogenerators for harvesting thermoelectric energy. , 2012, Nano letters.

[4]  Fang Zhang,et al.  Nanowire-composite based flexible thermoelectric nanogenerators and self-powered temperature sensors , 2012, Nano Research.

[5]  Yan Zhang,et al.  Ultrahigh sensitive piezotronic strain sensors based on a ZnSnO3 nanowire/microwire. , 2012, ACS nano.

[6]  Yan Zhang,et al.  Pyroelectric nanogenerators for driving wireless sensors. , 2012, Nano letters.

[7]  Dennis L. Polla,et al.  Experimental studies on primary and secondary pyroelectric effects in Pb(ZrxTi1−x)O3, PbTiO3, and ZnO thin films , 1991 .

[8]  S. Lang.  Pyroelectricity: From Ancient Curiosity to Modern Imaging Tool , 2005 .

[9]  S. Story,et al.  Probing Maxwell's demon with a nanoscale thermometer. , 2012, ACS nano.

[10]  J. Jung,et al.  A 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3-based pyroelectric generator and temperature sensor , 2015 .

[11]  Bozhi Tian,et al.  Outside looking in: nanotube transistor intracellular sensors. , 2012, Nano letters.

[12]  Geoff B. Smith,et al.  A method to measure total atmospheric long-wave down-welling radiation using a low cost infrared thermometer tilted to the vertical , 2015 .

[13]  Charles M. Lieber,et al.  Local electrical potential detection of DNA by nanowire-nanopore sensors , 2011, Nature nanotechnology.

[14]  W. D. Heer,et al.  Electrostatic deflections and electromechanical resonances of carbon nanotubes , 1999, Science.

[15]  Peter Woias,et al.  A self-sustaining micro thermomechanic-pyroelectric generator , 2011 .

[16]  F. Disalvo,et al.  Thermoelectric cooling and power generation , 1999, Science.

[17]  Ya Yang,et al.  Flexible Pyroelectric Nanogenerators using a Composite Structure of Lead‐Free KNbO3 Nanowires , 2012, Advanced materials.

[18]  Zhong Lin Wang,et al.  Toward self-powered sensor networks , 2010 .

[19]  Zhong Lin Wang,et al.  Self-powered nanowire devices. , 2010, Nature nanotechnology.

[20]  L. Bell.  Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems , 2008, Science.

[21]  Chenguo Hu,et al.  Harvesting heat energy from hot/cold water with a pyroelectric generator , 2014 .

[22]  Fang Zhang,et al.  Thermoelectric nanogenerators based on single Sb-doped ZnO micro/nanobelts. , 2012, ACS nano.