A Simplified Analysis Method for the Piezo Jet Dispenser with a Diamond Amplifier

Diamond amplifiers have been widely applied in Nano actuators and Robots. In order to study the dynamic characteristics of the diamond amplifier system which is used in the piezo jet dispenser, it is simplified as a spring-mass-damper system. The dynamic characteristics of the jet dispenser system are analyzed with the simplified method. The characteristics are also tested. The results agree with the simulation, which proves the method is feasible. It will provide a simplified and intuitive representation of the movement of the amplifier, and also provide reliable simulation and experimental platforms for jet dispensing analysis.

[1]  Jian Gao,et al.  Ultrasound aided smooth dispensing for high viscoelastic epoxy in microelectronic packaging. , 2016, Ultrasonics sonochemistry.

[2]  Can Zhou,et al.  Control and Jetting Characteristics of an Innovative Jet Valve With Zoom Mechanism and Opening Electromagnetic Drive , 2016, IEEE/ASME Transactions on Mechatronics.

[3]  Pu Li,et al.  Analytical modeling of thermoelastic damping in bilayered microplate resonators , 2016 .

[4]  Seung-Bok Choi,et al.  Design and performance evaluation of a new jetting dispenser system using two piezostack actuators , 2014 .

[5]  Gangbing Song,et al.  Dynamic Modelling of Embeddable Piezoceramic Transducers , 2017, Sensors.

[6]  Lei Zhang,et al.  The Effect of Electrical Impedance Matching on the Electromechanical Characteristics of Sandwiched Piezoelectric Ultrasonic Transducers , 2017, Sensors.

[7]  Can Zhou,et al.  New Applications of an Automated System for High-Power LEDs , 2016, IEEE/ASME Transactions on Mechatronics.

[8]  Min Zhang,et al.  High frequency, large displacement, and low power consumption piezoelectric translational actuator based on an oval loop shell , 2012 .

[9]  J. Duan,et al.  Improved thermal characteristics of a novel magnetostrictive jet dispenser using water-cooling approach , 2017 .

[10]  Seung-bok Choi,et al.  The design and control of a jetting dispenser for semiconductor electronic packaging driven by a piezostack and a flexible beam , 2008 .

[11]  J. Duan,et al.  Direct-Acting Piezoelectric Jet Dispenser With Rhombic Mechanical Amplifier , 2018, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[12]  Z. Zhong,et al.  Analysis of the displacement amplification ratio of bridge-type flexure hinge , 2006 .

[13]  Jinbang Li,et al.  Friction and wear behavior of linear standing-wave ultrasonic motors with V-shape transducers , 2016 .

[14]  Can Zhou,et al.  A New Automatic Testing System Based on Image Processing and Microprobes for IC-Testing , 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[15]  Xiaohui Du,et al.  Design and Experiment of a Jetting Dispenser Driven by Piezostack Actuator , 2013, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[16]  Can Zhou,et al.  A Novel High-Speed Jet Dispenser Driven by Double Piezoelectric Stacks , 2017, IEEE Transactions on Industrial Electronics.

[17]  Seung-Bok Choi,et al.  Modeling of Unsteady Laminar Flow Based on Steady Solution in Jetting Dispensing Process , 2008, IEEE Transactions on Electronics Packaging Manufacturing.

[18]  Yufeng Yao,et al.  Design and experiment of a needle-type piezostack-driven jetting dispenser based on lumped parameter method , 2015 .

[19]  Seung-Bok Choi,et al.  A new type of piezostack-driven jetting dispenser for semiconductor electronic packaging: modeling and control , 2008 .

[20]  Can Zhou,et al.  Giant magnetostrictive material based jetting dispenser , 2015 .

[21]  Junyi Cao,et al.  Enhanced mathematical modeling of the displacement amplification ratio for piezoelectric compliant mechanisms , 2016 .

[22]  Wei Li,et al.  High-Speed Low-Friction Piezoelectric Motors Based On Centrifugal Force , 2017, IEEE Transactions on Industrial Electronics.

[23]  Hirobumi Ushijima,et al.  Experimental study on injecting highly viscous liquids by using a reciprocating needle dispensing system , 2017 .