Construction of Wendelstein 7-X - Engineering a steady state stellarator
暂无分享,去创建一个
[1] S Zoletnik,et al. Diagnostic developments for quasicontinuous operation of the Wendelstein 7-X stellarator. , 2008, The Review of scientific instruments.
[2] Remo Guidieri. Res , 1995, RES: Anthropology and Aesthetics.
[3] R. König,et al. Optical design study of an infrared visible viewing system for Wendelstein 7-X divertor observation and control. , 2008, The Review of scientific instruments.
[4] M. Schmid,et al. Development of a 140-GHz 1-MW continuous wave gyrotron for the W7-X stellarator , 2002 .
[5] T. Eich,et al. Numerical Studies on Radiative Heat Loads to Plasma-Facing Components for the W7-X Stellarator , 2008 .
[6] Philipp Borchard,et al. Recent ITER-Relevant Gyrotron Tests , 2005 .
[7] A. Werner,et al. Diagnostics for steady state plasmas , 2006 .
[9] J. Tretter,et al. Progress in the design and development of a test divertor (TDU) for the start of W7-X operation , 2009 .
[10] H. Greuner,et al. High heat flux facility GLADIS:: Operational characteristics and results of W7-X pre-series target tests , 2007 .
[11] H. Greuner,et al. Results of the examinations of the W7-X pre-series target elements , 2007 .
[12] A. Charl,et al. Design and Construction of the Superconducting Bussystem for the Stellarator W7-X , 2005, 21st IEEE/NPS Symposium on Fusion Engineering SOFE 05.
[13] L. Wegener,et al. Status of Wendelstein 7-X construction , 2009 .
[14] Th. Rummel,et al. Fabrication of the planar coils for WENDELSTEIN 7-X , 2005 .
[15] Georg Kühner,et al. Status report on the development of the data acquisition system of Wendelstein7-X , 2004 .
[17] A. Cardella,et al. The in-vessel components of the experiment Wendelstein 7-X , 2009 .
[18] E. Strumberger,et al. Overview on Wendelstein 7-X Theory , 1995 .
[19] G. G. Stokes. "J." , 1890, The New Yale Book of Quotations.
[20] H. Greuner,et al. Pre-series and testing route for the serial fabrication of W7-X target elements , 2009 .
[21] C. Sborchia,et al. Cold Tests of the Superconducting Coils for the Stellarator W7-X , 2008, IEEE Transactions on Applied Superconductivity.
[22] A. Cardella,et al. Manufacturing and assembly status of main components of the Wendelstein 7-X Cryostat , 2009 .
[23] Miss A.O. Penney. (b) , 1974, The New Yale Book of Quotations.
[24] A. Werner,et al. Integrated Software Development for Wendelstein 7-X , 2007 .
[25] Jean Boscary,et al. Physical Aspects and Design of the Wendelstein 7-X Divertor , 2004 .
[26] G. Gantenbein,et al. Electron Cyclotron Heating for W7-X: Physics and Technology , 2007 .
[27] J. Baldzuhn,et al. Paschen Testing on W7-X Coils and Components in the BNN Test Facility , 2006, IEEE Transactions on Applied Superconductivity.
[28] Andrew G. Glen,et al. APPL , 2001 .
[29] W. Lotz,et al. Quasi-isodynamic stellarators , 1997 .
[30] M. Lewerentz,et al. Overview and status of the control system of WENDELSTEIN 7-X , 2007 .
[31] C. Sborchia,et al. Progress in the Design, Manufacture and Testing of the W7-X Superconducting Magnets , 2006, IEEE Transactions on Applied Superconductivity.
[32] Andreas Werner,et al. Overview and status of the prototype project for Wendelstein 7-X control system , 2009 .
[33] W. Fietz,et al. High Temperature Superconductor Current Leads for WENDELSTEIN 7-X and JT-60SA , 2009, IEEE Transactions on Applied Superconductivity.
[34] A. Cardella,et al. Manufacture of Inter-Coil Support-Elements of the W7-X Magnet System , 2007, 2007 IEEE 22nd Symposium on Fusion Engineering.
[35] V. Bykov,et al. Structural analysis of the W7-X cryogenic pipe system , 2009 .