Possibilities for characterization of a PCM window system using large scale measurements

Abstract The introduction of dynamic envelope components and systems can have a significant reduction effect on heating and cooling demands. In addition, it can contribute to reduce the energy demand for artificial lighting by better utilization of daylight. One of these promising technologies is Phase Change Materials (PCM). Here, the latent heat storage potential of the transition between solid and liquid state of a material is exploited to increase the thermal mass of the component. A PCM layer incorporated in a transparent component can increase the possibilities to harvest energy from solar radiation by reducing the heating/cooling demand and still allowing the utilization of daylight. Measurements have been performed on a state-of-the-art, commercially available window that integrates PCM using a large scale climate simulator. The glazing unit consists of a four-pane glazing with an integrated layer that dynamically controls the solar transmittance (prismatic glass) in the outer glazing cavity. The innermost cavity is filled with a PCM, contained in transparent plastic containers. When dynamic components are incorporated in the building envelope, it makes the characterization of static performance (e.g. the thermal transmittance, U -value; the solar heat gain coefficient) insufficient in giving the full picture regarding the performance of the component in question. This article presents a series of preliminary measurements, and the related methodologies, carried out on a window with incorporated PCM. The tests have been carried out using several test cycles comprised of temperature and solar radiation cycling, where the aim has been to delve deeper into the possibilities for the characterization of dynamic building envelope components by full scale testing in a climate simulator, showing potentials and limitations of this approach and measurement facility. It was found that even for temperatures similar to a warm day in Nordic climate, the potential latent heat storage capacity of the PCM was fully activated. Long periods of sun combined with high exterior temperatures are needed.

[1]  Marcus Bianchi,et al.  Verification and validation of EnergyPlus phase change material model for opaque wall assemblies , 2012 .

[2]  Kamal Abdel Radi Ismail,et al.  Thermally effective windows with moving phase change material curtains , 2001 .

[3]  Valentina Serra,et al.  Improving thermal comfort conditions by means of PCM glazing systems , 2013 .

[4]  Esam M. Alawadhi,et al.  Using phase change materials in window shutter to reduce the solar heat gain , 2012 .

[5]  Rasmus Lund Jensen,et al.  Measuring Air Temperature in Glazed Ventilated Facades in the Presence of Direct Solar Radiation , 2007 .

[6]  S. Corgnati,et al.  Experimental assessment of the performance of an active transparent façade during actual operating conditions , 2007 .

[7]  D. Christoffers,et al.  Seasonal shading of vertical south-facades with prismatic panes , 1996 .

[8]  J. Fricke,et al.  PCM-facade-panel for daylighting and room heating , 2005 .

[9]  H. Manz,et al.  Numerical simulation of heat transfer by natural convection in cavities of facade elements , 2003 .

[10]  Panayiotis A. Kyriacou,et al.  Experimental and numerical investigations of the optical and thermal aspects of a PCM-glazed unit , 2013 .

[11]  Fritjof Salvesen,et al.  Veileder for bruk av translusente fasader , 2012 .

[12]  Arild Gustavsen,et al.  The Effect of Wall-Integrated Phase Change Material Panels on the Indoor Air and Wall Temperature - Hot box Experiments , 2010 .

[13]  H. Weinlaeder,et al.  Monitoring results of an interior sun protection system with integrated latent heat storage , 2011 .

[14]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[15]  Kamal Abdel Radi Ismail,et al.  Comparison between PCM filled glass windows and absorbing gas filled windows , 2008 .

[16]  Valentina Serra,et al.  Characterization of the optical properties of a PCM glazing system , 2012 .

[17]  H. Manz,et al.  TIM–PCM external wall system for solar space heating and daylighting , 1997 .

[18]  Valentina Serra,et al.  Experimental assessment of the thermal behaviour of a PCM glazing , 2010 .