The effects of post-deposition processes on polysilicon Young's modulus

Polysilicon films deposited by low pressure chemical deposition (LPCVD) are the most widely used structural material for microelectromechanical systems (MEMS). However, the properties of LPCVD polysilicon are known to vary significantly, depending on deposition conditions as well as post-deposition processes. This paper presents extensive experimental results, investigating the effects of phosphorus doping and texture on Young's modulus of polysilicon films. Polysilicon films are deposited at 585, 605 and 625 to a thickness of 2 m. Specimens with varying phosphorus doping levels are prepared by diffusion doping at various temperatures and times using both and phosphosilicate glass (PSG) as the source. Young's modulus is calculated by taking the average of the values calculated from the resonant frequencies of four different-size lateral resonators. Our results show that Young's modulus decreases with increasing doping concentration, and increases with increasing texture. The polysilicon grain size and grain boundaries could also have an influence on Young's modulus, which remains to be further investigated.

[1]  Khalil Najafi,et al.  Impact of high-thermal budget anneals on polysilicon as a micromechanical material , 1998 .

[2]  Michael A. Huff,et al.  Heating Effects on The Young's Modulus of Films Sputtered onto Micromachined Resonators , 1998 .

[3]  R. Mullen,et al.  Mechanical properties of thick, surface micromachined polysilicon films , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[4]  D. W. Burns,et al.  A simple technique for the determination of mechanical strain in thin films with applications to polysilicon , 1985 .

[5]  Khalil Najafi,et al.  Electronic Determination of the Modulus of Elasticity and Intrinsic Stress of Thin Films using Capacitive Bridges , 1992 .

[6]  R. Muller,et al.  Measurement of Young's modulus on microfabricated structures using a surface profiler , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[7]  O. Tabata,et al.  Mechanical property measurements of thin films using load-deflection of composite rectangular membranes , 1989 .

[8]  W. Brantley.  Calculated elastic constants for stress problems associated with semiconductor devices , 1973 .

[9]  D. Maier-Schneider,et al.  Elastic properties and microstructure of LPCVD polysilicon films , 1996 .

[10]  Roger T. Howe,et al.  Stress and Microstructure in Phosphorus Doped Polycrystalline Silicon , 1992 .

[11]  J. E. Hilliard,et al.  Determination of the primary elastic constants from thin foils having a strong texture , 1982 .

[12]  T. Kamins.  Structure and Properties of LPCVD Silicon Films , 1980 .

[13]  B. Cullity,et al.  Elements of X-ray diffraction , 1957 .

[14]  T. Kamins.  Polycrystalline silicon for integrated circuit applications , 1988 .

[15]  William C. Tang,et al.  Laterally driven polysilicon resonant microstructures , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[16]  K. Najafi,et al.  A novel technique and structure for the measurement of intrinsic stress and Young's modulus of thin films , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[17]  Mehran Mehregany,et al.  Mechanical integrity of polysilicon films exposed to hydrofluoric acid solutions , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[18]  T. F. Retajczyk,et al.  Effect of phosphorus doping on stress in silicon and polycrystalline silicon , 1983 .

[19]  Weiyuan Wang,et al.  Theoretical Calculation for the Young's Modulus of Poly-Si and a-Si Films , 1992 .

[20]  Chang-Jin Kim,et al.  Elimination of extra spring effect at the step-up anchor of surface-micromachined structure , 1998 .

[21]  R. Howe,et al.  Lpcvd Polycrystalline Silicon Thin Films: The Evolution of Structure, Texture and Stress , 1990 .