Crack characterization using guided circumferential waves.

This paper examines the propagation of guided circumferential waves in a hollow isotropic cylinder that contains a crack, with the goal of using these guided waves to both locate and size the crack. The crack is sized using a modified Auld's formula, which relates the crack's length to a reflected energy coefficient. The crack is then located by operating on the backscattered signal with a time-frequency digital signal processing (DSP) technique, and then comparing these results to those obtained if the cylinder is perfect. The guided circumferential waves are generated with a commercial finite element method (FEM) code. One objective of this work is to demonstrate the effectiveness of using sophisticated DSP techniques to describe the effect of scattering on dispersive waves, showing it is possible to characterize cracks systematically and accurately by quantifying this scattering effect. The results show that the need for high frequency signals to detect small cracks is significantly decreased by using these techniques.

[1]  B. Auld.  General electromechanical reciprocity relations applied to the calculation of elastic wave scattering coefficients , 1979 .

[2]  Peter B. Nagy,et al.  Weep hole inspection by circumferential creeping waves , 1994 .

[3]  I. A. Viktorov.  Rayleigh and Lamb Waves , 1967 .

[4]  M. Lowe.  Characteristics of the Reflection of Lamb Waves from Defects in Plates and Pipes , 1998 .

[5]  Niethammer,et al.  Time-frequency representation of Lamb waves using the reassigned spectrogram , 2000, The Journal of the Acoustical Society of America.

[6]  B. Auld,et al.  Acoustic fields and waves in solids , 1973 .

[7]  I. A. Viktorov,et al.  RAYLEIGH TYPE WAVES ON A CYLINDRICAL SURFACE , 1958 .

[8]  Peter Cawley,et al.  Prediction and measurement of the reflection of the fundamental anti-symmetric Lamb wave from cracks and notches , 2000 .

[9]  Jianmin Qu,et al.  Transient wave propagation in a circular annulus subjected to transient excitation on its outer surface , 1998 .

[10]  Lowe,et al.  The transmission of Lamb waves across adhesively bonded lap joints , 2000, The Journal of the Acoustical Society of America.

[11]  A. H. Shah,et al.  Scattering of an Impact Wave by a Crack in a Composite Plate , 1992 .

[12]  Patrick Flandrin,et al.  Improving the readability of time-frequency and time-scale representations by the reassignment method , 1995, IEEE Trans. Signal Process..

[13]  Peter Cawley,et al.  The Long Range Detection of Corrosion in Pipes Using Lamb Waves , 1995 .

[14]  Laurence J. Jacobs,et al.  Modeling elastic wave propagation in waveguides with the finite element method , 1999 .

[15]  J. Qu,et al.  GUIDED CIRCUMFERENTIAL WAVES IN A CIRCULAR ANNULUS , 1998 .

[16]  Marc Niethammer,et al.  Application of time frequency representations to characterize ultrasonic signals , 1999 .

[17]  Arvind H. Shah,et al.  Transient Response of a Composite Plate With Delamination , 1998 .

[18]  D. Chimenti.  Guided Waves in Plates and Their Use in Materials Characterization , 1997 .

[19]  Laurence J. Jacobs,et al.  Guided circumferential waves in layered cylinders , 1999 .