Flow Channel Influence of a Collision-Based Piezoelectric Jetting Dispenser on Jet Performance

To improve the jet performance of a bi-piezoelectric jet dispenser, mathematical and simulation models were established according to the operating principle. In order to improve the accuracy and reliability of the simulation calculation, a viscosity model of the fluid was fitted to a fifth-order function with shear rate based on rheological test data, and the needle displacement model was fitted to a nine-order function with time based on real-time displacement test data. The results show that jet performance is related to the diameter of the nozzle outlet and the cone angle of the nozzle, and the impacts of the flow channel structure were confirmed. The approach of numerical simulation is confirmed by the testing results of droplet volume. It will provide a reliable simulation platform for mechanical collision-based jet dispensing and a theoretical basis for micro jet valve design and improvement.

[1]  Can Zhou,et al.  Simulation and experiment study on the jetting dispensing process driven by mechanical collision , 2015, 2015 16th International Conference on Electronic Packaging Technology (ICEPT).

[2]  Can Zhou,et al.  Fluid dynamics of jetting dispensing process based on simulation and experiment , 2016, 2016 17th International Conference on Electronic Packaging Technology (ICEPT).

[3]  C. Zhou,et al.  The principle and physical models of novel jetting dispenser with giant magnetostrictive and a magnifier , 2015, Scientific Reports.

[4]  Xiaoyang Jiao,et al.  Nozzle and needle during high viscosity adhesive jetting based on piezoelectric jet dispensing , 2015 .

[5]  Vincenzo Guarino,et al.  Magneto-piezoresistive elastomers optimization and sensitivity in prospect of MEMS using magnetization direction reading , 2017 .

[6]  Can Zhou,et al.  Control and Jetting Characteristics of an Innovative Jet Valve With Zoom Mechanism and Opening Electromagnetic Drive , 2016, IEEE/ASME Transactions on Mechatronics.

[7]  Frank E. Talke,et al.  Experimental and theoretical study of wave propagation phenomena in drop-on-demand ink jet devices , 1984 .

[8]  Wei Li,et al.  High-Speed Low-Friction Piezoelectric Motors Based On Centrifugal Force , 2017, IEEE Transactions on Industrial Electronics.

[9]  Can Zhou,et al.  New Applications of an Automated System for High-Power LEDs , 2016, IEEE/ASME Transactions on Mechatronics.

[10]  Chongyoup Kim,et al.  Dispensing of rheologically complex fluids at the dripping regime , 2014 .

[11]  Adrien Badel,et al.  Self-powered optimized synchronous electric charge extraction circuit for piezoelectric energy harvesting , 2014 .

[12]  Seung-Bok Choi,et al.  Design of a Novel Jetting Dispenser Featuring Piezostack and Linear Pump , 2008 .

[13]  Mariano Aceves-Mijares,et al.  Enhancing emission and conduction of light emitting capacitors by multilayered structures of silicon rich oxide , 2017 .

[14]  Pu Li,et al.  Analytical modeling of thermoelastic damping in bilayered microplate resonators , 2016 .

[15]  J. E. Fromm,et al.  Numerical calculation of the fluid dynamics of drop-on-demand jets , 1984 .

[16]  Jinbang Li,et al.  Friction and wear behavior of linear standing-wave ultrasonic motors with V-shape transducers , 2016 .

[17]  Xiaohui Du,et al.  Simulation and experiment study on adhesive ejection behavior in jetting dispenser , 2014 .

[18]  Hirobumi Ushijima,et al.  Experimental study on injecting highly viscous liquids by using a reciprocating needle dispensing system , 2017 .

[19]  Jinhao Qiu,et al.  A 2-degree-of-freedom cubic nonlinear piezoelectric harvester intended for practical low-frequency vibration , 2017 .

[20]  Lei Han,et al.  Study on a cooling system based on thermoelectric cooler for thermal management of high-power LEDs , 2011, Microelectron. Reliab..

[21]  Can Zhou,et al.  Giant magnetostrictive material based jetting dispenser , 2015 .

[22]  Chingfu Tsou,et al.  A Silicon-Based LED Packaging Substrate With an Island Structure for Phosphor Encapsulation Shaping , 2015, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[23]  Yufeng Yao,et al.  Design and experiment of a needle-type piezostack-driven jetting dispenser based on lumped parameter method , 2015 .

[24]  Xiaohui Du,et al.  Design and Experiment of a Jetting Dispenser Driven by Piezostack Actuator , 2013, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[25]  Can Zhou,et al.  A Novel High-Speed Jet Dispenser Driven by Double Piezoelectric Stacks , 2017, IEEE Transactions on Industrial Electronics.