The effect of dunite powder and silica fume on the viscosity, physico-mechanical properties and sulphate resistance of self-compacting mortars
暂无分享,去创建一个
[1] Baoju Liu,et al. Effect of curing regime on the immobilization of municipal solid waste incineration fly ash in sustainable cement mortar. , 2022, Environmental pollution.
[2] Maedeh Orouji,et al. Effect of GFRP rebars and polypropylene fibers on flexural strength in high-performance concrete beams with glass powder and microsilica , 2023, Case Studies in Construction Materials.
[3] B. Tayeh,et al. Improvement in the flexural behaviour of road pavement slab concrete containing steel fibre and silica fume , 2023, Case Studies in Construction Materials.
[4] Bassam A. Tayeh,et al. Influence of Blended Powders on Properties of Ultra-High Strength Fibre Reinforced Self Compacting Concrete Subjected to Elevated Temperatures , 2022, Case Studies in Construction Materials.
[5] R. Siddique,et al. The use of waste marble for cleaner production of structural concrete: A comprehensive experimental study , 2022, Construction and Building Materials.
[6] B. Tayeh,et al. Experimental investigation on the behaviour of crumb rubber concrete columns exposed to chloride–sulphate attack , 2022, Structures.
[7] M. Karatas,et al. High-temperature and abrasion resistance of self-compacting mortars incorporating binary and ternary blends of silica fume and slag , 2022, Construction and Building Materials.
[8] Erfan Najaf,et al. Using Recycled Concrete Powder, Waste Glass Powder, and Plastic Powder to Improve the Mechanical Properties of Compacted Concrete: Cement Elimination Approach , 2022, Advances in Civil Engineering.
[9] Bassam A. Tayeh,et al. Durability and mechanical properties of cement concrete comprising pozzolanic materials with alkali-activated binder: A comprehensive review , 2022, Case Studies in Construction Materials.
[10] T. Uygunoğlu,et al. Effect of adding Na2SO4–MgSO4 solution on compressive strength of self-compacting concrete subjected to extreme conditions , 2022, Innovative Infrastructure Solutions.
[11] Yu Zhang,et al. Recycling air-cooled blast furnace slag in fiber reinforced alkali-activated mortar , 2022, Powder Technology.
[12] O. Bayraktar,et al. Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement , 2022, Structural Concrete.
[13] A. Sari,et al. Investigation of physico-mechanical, thermal properties and solar thermoregulation performance of shape-stable attapulgite based composite phase change material in foam concrete , 2022, Solar Energy.
[14] O. Gencel,et al. Basalt fiber-reinforced foam concrete containing silica fume: An experimental study , 2022, Construction and Building Materials.
[15] Si-Huy Ngo,et al. Waste incineration bottom ash as a fine aggregate in mortar: An assessment of engineering properties, durability, and microstructure , 2022, Journal of Building Engineering.
[16] Bassam A. Tayeh,et al. Using artificial neural networks for predicting mechanical and radiation shielding properties of different nano-concretes exposed to elevated temperature , 2022, Construction and Building Materials.
[17] O. Gencel,et al. Lightweight foam concrete containing expanded perlite and glass sand: Physico-mechanical, durability, and insulation properties , 2022, Construction and Building Materials.
[18] Bassam A. Tayeh,et al. Effect of ferrosilicon and silica fume on mechanical, durability, and microstructure characteristics of ultra high-performance concrete , 2022, Construction and Building Materials.
[19] Qian Chen,et al. Effects of silica fume and Fly ash on properties of mortar reinforced with recycled-polypropylene , 2022, Construction and Building Materials.
[20] B. Tayeh,et al. Influence of microsilica and polypropylene fibers on the fresh and mechanical properties of ultra-high performance geopolymer concrete (UHP-GPC) , 2022, Case Studies in Construction Materials.
[21] O. Bayraktar,et al. The effect of recycled fine aggregates treated as washed, less washed and unwashed on the mechanical and durability characteristics of concrete under MgSO4 and freeze-thaw cycles , 2022, Journal of Building Engineering.
[22] R. Nagar,et al. Permeation, corrosion, and drying shrinkage assessment of self-compacting high strength concrete comprising waste marble slurry and fly ash, with silica fume , 2021 .
[23] O. Bayraktar,et al. Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze–thaw cycles , 2021, Construction and Building Materials.
[24] A. Faheem,et al. Properties of self-compacting mortars using blends of limestone powder, fly ash, and zeolite powder , 2021 .
[25] B. Tayeh,et al. Mechanical Properties of Silica Fume Modified High-Volume Fly Ash Rubberized Self-Compacting Concrete , 2021, Sustainability.
[26] Bassam A. Tayeh,et al. Role of expanded clay aggregate, metakaolin and silica fume on the of modified lightweight concrete properties , 2021 .
[27] James H. Haido,et al. Effect of high temperature on the mechanical properties of basalt fibre self-compacting concrete as an overlay material , 2021 .
[28] B. Tayeh,et al. Flexural behavior of RC beams strengthened with steel wire mesh and self-compacting concrete jacketing — experimental investigation and test results , 2021, Journal of Materials Research and Technology.
[29] A. Benli,et al. The effects of kaolin and calcined kaolin on the durability and mechanical properties of self-compacting mortars subjected to high temperatures , 2020 .
[30] M. Karatas,et al. Effect of high temperature on the performance of self-compacting mortars produced with calcined kaolin and metakaolin , 2020 .
[31] Doha M. Al Saffar,et al. Exploitation of the nanowaste ceramic incorporated with nano silica to improve concrete properties , 2020, Journal of King Saud University - Engineering Sciences.
[32] Pouyan Fakharian,et al. Improving the Properties of Self-compacted Concrete with Using Combined Silica Fume and Metakaolin , 2020 .
[33] K. Samimi,et al. Magnesium Sulfate (MgSO4) Attack and Chloride Isothermal Effects on the Self-consolidating Concrete Containing Metakaolin and Zeolite , 2020 .
[34] Rajesh Gupta,et al. Impact on fresh, mechanical, and microstructural properties of high strength self-compacting concrete by marble cutting slurry waste, fly ash, and silica fume , 2020 .
[35] Bassam A. Tayeh,et al. Effects of using rice straw and cotton stalk ashes on the properties of lightweight self-compacting concrete , 2020, Construction and Building Materials.
[36] A. Sadrmomtazi,et al. Residual strength and microstructure of fiber reinforced self-compacting concrete exposed to high temperatures , 2020 .
[37] Karthik T Prabhu,et al. Durability properties of fly ash and silica fume blended concrete for marine environment , 2019 .
[38] M. Karatas,et al. Effect of incorporation of raw vermiculite as partial sand replacement on the properties of self-compacting mortars at elevated temperature , 2019, Construction and Building Materials.
[39] Doha M. Al Saffar,et al. Sulphate resistance of cement mortar contains glass powder , 2019 .
[40] A. Benli. Mechanical and durability properties of self‐compacting mortars containing binary and ternary mixes of fly ash and silica fume , 2019, Structural Concrete.
[41] S. Delvasto,et al. Assessment of the performance of SCC incorporating volcanic materials in a sodium sulfate environment , 2019, Construction and Building Materials.
[42] A. Benli,et al. Influence of ground pumice powder on the mechanical properties and durability of self-compacting mortars , 2017 .
[43] J. Bai,et al. Mechanical and microstructural properties of self-compacting concrete blended with metakaolin, ground granulated blast-furnace slag and fly ash , 2017 .
[44] M. Karatas,et al. Effect of sea water and MgSO4 solution on the mechanical properties and durability of self-compacting mortars with fly ash/silica fume , 2017 .
[45] M. Karatas,et al. An experimental study of different curing regimes on the mechanical properties and sorptivity of self-compacting mortars with fly ash and silica fume , 2017 .
[46] A. Chatterjee,et al. Optimize Properties of Concrete with Silica Fume , 2017 .
[47] R. Douglas Hooton,et al. Workability retention and compressive strength of self-compacting concrete incorporating pumice powder and silica fume , 2017 .
[48] A. Benli,et al. High temperature resistance of self-compacting lightweight mortar incorporating expanded perlite and pumice , 2017 .
[49] R. Hassanli,et al. Assessment of the mechanical performance of crumb rubber concrete , 2016 .
[50] M. Bederina,et al. Effect of magnesium sulfate on the durability of limestone mortars based on quaternary blended cements , 2016 .
[51] Adil Hafidi Alaoui,et al. Influence of silica fume and viscosity modifying agent on the mechanical and rheological behavior of self compacting concrete , 2015 .
[52] Mehmet Gesoǧlu,et al. Effect of volcanic pumice powder on the fresh properties of self-compacting concretes with and without silica fume , 2014 .
[53] P. Muthupriya,et al. Performance of self-compacting concrete containing different mineral admixtures , 2013, KSCE Journal of Civil Engineering.
[54] Xudong Chen,et al. Influence of porosity on compressive and tensile strength of cement mortar , 2013 .
[55] H. Khelafi,et al. Durability of concrete containing a natural pozzolan as defined by a performance-based approach , 2009 .
[56] S. Türkel,et al. The effect of limestone powder, fly ash and silica fume on the properties of self-compacting repair mortars , 2009 .
[57] S. Kenai,et al. Silica Fume Effect on Hydration Heat and Compressive Strength of High-Performance Concrete , 2009 .
[58] Marco Torres,et al. Lightweight pozzolanic materials used in mortars: Evaluation of their influence on density, mechanical strength and water absorption , 2009 .
[59] S. Al-Dulaijan. Sulfate resistance of plain and blended cements exposed to magnesium sulfate solutions , 2007 .
[60] Omar Saeed Baghabra Al-Amoudi,et al. Effectiveness of corrosion inhibitors in contaminated concrete , 2003 .
[61] C. Gallé,et al. Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze-drying , 2001 .