Optical fiber long period grating sensor with a polyelectrolyte alternate thin film for gas sensing of amine odors

Abstract The formation of poly(acrylic acid) (PAA) and poly(allyamine hydrochloride) (PAH) multilayers on an optical fiber long period grating (LPG) by the layer-by-layer (LbL) assembly technique for highly sensitive ammonia gas detection is reported. Observation of the LPG's transmission spectrum indicated that the refractive index (RI) of the PAH/PAA alternate layer film was changed on exposure to ammonia, possibly via a change in the structure of the polyelectrolyte multilayers. PAA could act as a receptor for binding of amine compounds including ammonia, which would induce changes in the coating properties such as optical thickness (OT), film thickness/density and electrostatic interaction, thus influencing the transmission spectrum of the LPG. The ammonia binding is based on the acid–base interaction to free carboxylic acid groups of PAA. An LPG of period 100 μm with a 7-cycle PAH/PAA coating exposed to ammonia exhibited a limit of detection of 10.7 ppm. Film morphology and thickness changes due to the binding of ammonia gas, explaining the sensing mechanism, were confirmed through atomic force microscopic (AFM) measurements.

[1]  Kiyoshi Toko,et al.  Nanoassembled thin film gas sensors. III. Sensitive detection of amine odors using TiO2/poly(acrylic acid) ultrathin film quartz crystal microbalance sensors. , 2010, Analytical chemistry.

[2]  David Smith,et al.  A longitudinal study of ammonia, acetone and propanol in the exhaled breath of 30 subjects using selected ion flow tube mass spectrometry, SIFT-MS , 2006, Physiological measurement.

[3]  I. Del Villar,et al.  Optical Fiber Humidity Sensor Based on Lossy Mode Resonances , 2009 .

[4]  Ralph P. Tatam,et al.  Refractive index sensitivity of fibre-optic long period gratings coated with SiO2 nanoparticle mesoporous thin films , 2011 .

[5]  S. James,et al.  A Novel Ammonia Gas Sensor Using a Nanoassembled Polyelectrolyte Thin Film on Fiber-optic Long-period Gratings , 2012 .

[6]  N. Bârsan,et al.  Water and ammonia influence on the conduction mechanisms in polyacrylic acid films , 2007 .

[7]  S. Shiratori,et al.  Removal of toxic gas by hybrid chemical filter fabricated by the sequential adsorption of polymers , 2001 .

[8]  N. Bârsan,et al.  Interdependence of ammonia and water sorption in polyacrylic acid layers , 2008 .

[9]  Steven W. Cranford,et al.  PAPER www.rsc.org/softmatter | Soft Matter Mechanomutable properties of a PAA/PAH polyelectrolyte complex: rate dependence and ionization effects on tunable adhesion strength , 2010 .

[10]  Seung-Woo Lee,et al.  One-step Fabrication of Polystyrene–TiO2 Nanosandwich Film by Phase Separation , 2012 .

[11]  A. Berg,et al.  Ammonia sensors and their applications - a review , 2005 .

[12]  Ralph P. Tatam,et al.  Pronounced aromatic carboxylic acid detection using a layer-by-layer mesoporous coating on optical fibre long period grating , 2012 .

[13]  N. Bârsan,et al.  Chemical interaction of gaseous ammonia and water vapour with polyacrylic acid layers , 2008 .

[14]  Sergiy Korposh,et al.  Fiber optic long period grating sensors with a nanoassembled mesoporous film of SiO2 nanoparticles. , 2010, Optics express.

[15]  Abliz Yimit,et al.  Detection of ammonia in the ppt range based on a composite optical waveguide pH sensor , 2003 .

[16]  W. Geng,et al.  Layer-by-layer deposition of polyelectrolyte-polyelectrolyte complexes for multilayer film fabrication. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[17]  S. Shiratori,et al.  Correlation of antithrombogenicity and heat treatment for layer-by-layer self-assembled polyelectrolyte films. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[18]  Ralph P. Tatam,et al.  Response of fiber-optic long-period gratings operating near the phase-matching turning point to the deposition of nanostructured coatings , 2008 .

[19]  S. Shiratori,et al.  Design of a thin film for optical applications, consisting of high and low refractive index multilayers, fabricated by a layer-by-layer self-assembly method , 2006 .

[20]  Zoltán Bozóki,et al.  Ammonia monitoring at ppb level using photoacoustic spectroscopy for environmental application , 2008 .